SHARP SP1918 Technical Report
Date: Aug. 21, 1995
COPIER(OPTION) : SF-A14, SF-A55
1. INTERCHANGEABILITY MEASURES FOR THE HINGE
SECTION DUMMY SHAFT TO IMPROVE PRODUCTIVITY.
2. EST ABLIS HMENT OF INTERFACE CABLES AS SERVICE
PART S.
1. Interchangeability measures for the hinge section dummy shaft to improve
productivity.
1.Model name: SF-A14.
2.General: The dummy shaft used in the hinge section of the SF-A14 model copier has been
changed to the same one used in the hinge section of the SF-A15 model to establish
interchangeability. This measure has been carried out to improve productivity.
No. : SP-1918
3.Description:
Dummy shaft
Note: Both shafts are interchangeable, but the number of E type rings used to hold the
shaft in place is reduced from 2 (before the change) to 1 (after the change).
4.Action: From the start of 1995 June production.
Old New
(Used with the SF-A15)
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Establishment of interface cables as service parts.
1.Model name: SF-A55.
2.General: The ASM interface of the SF-A55 model copier was not originally established as service
parts and has therefore been newly established as such.
ASM Interface
2/2
Ref.
Model
No.
1 SF-A14
2 SF-A55
<Interchange>
1. Interchang ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified on es fo r m ai n ta ini ng t he s a fe ty an d pe r fo rmance o f th e s et .
name
Version P/G No.
3 -23
All
4
!
Current parts New parts
Parts code Parts code
0CW2166P221B/ 0CW2199P305// AG Dummy shaft
— 0CW2198K214// BE ASM interface — —
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
rank
Effec-
tive
time
1 st lot
’95/6
Inter-
change-
ability
1
Note
Loading...