SHARP SP1881 Technical Report

Date: May. 15, 1995

COPIER (OPTION) : SF-S52/EA11

No. : SP-1881

[Service Information]

1.CHANGE IN THE LENGTH OF THE FIXING SCREWS OF THE SORTER ATTACHMENT PLATE.

2.CHANGE IN PARTS SHAPES IN ACCORDANCE WITH A RE QUEST FRO M OUR CUSTOMERS.

3.CHANGE IN THE PRINTED CONTENT OF THE STANDARDS PLATE IN ACCORDANCE WITH A CHANGE CARRIED OUT ON THE UL ST ANDARDS .

1. Change in the length of the fixing screws of the sorter attachment plate.

1.Model name: SF-S53

2.General: The length of the sorter attachment plate fixing screws included in the boxes with units

produced from 1995 February has been increased so that the sorter (SF-S53) can be installed with the new unit, model SF-2050.

3.Description: Old: 0GZXB12401406 (M4 x 14)

↓

New: 0GZXB12401606 (M4 x 16)

The new fixing screws have been included in the bags with the operation manual of the SF-2050 unit, and can be used with all units of model S53 produced before 1995 February.

4.Action: Change in the screws on the sorter side: From the start of 1995 February production.

Screws packed together with the main unit of the machine:

From the start of 1995 April production.

2. Change in parts shapes in accordance with a request from our customers.

Upper cabinet left fixing screws.

Sorter attachment plate fixing screws.

Sorter attachment plate.

1.Model name: SF-S51/S53

2.General: A change in the shape of some of the parts has been carried out in accordance with a

request from the buyers of models SF-S51 and SF-S53. (Because the new parts are interchangeable with the old parts, no changes have been carried out on the parts codes.)

Green

SHARP CORPORATION Reprography Division

1/2

3.Description:

(Old) (New)

Actuator switch P/G 3 -20

Cover internal P/G 2 -5

Added square hole

4.Action: From the start of 1995 February production.

Door stapler P/G 2 -21

Added boss

3. Change in the printed content of the standards plate in accordance with a change carried out on the UL standards.

1.Model name: SF-EA11/EA12/EA13 (bound for the U.S.A. only)

2.General: The printed content of the standards plates used with the

models listed above has been changed as shown in the figure at right. This change has been carried out in accordance with a change that was carried out in the UL standards.

3.Action: From the start of 1995 February production.

2/2

(Old)

(New)

LISTED 546A

ACCESSORY

I.T.E LISTED

9K11

ACCESSORY