SHARP SP1872 Technical Report
Date: Mar. 31, 1995
COPIER : Z-20
No. : SP-1872
TECHNICAL REPORT REVISION REQUEST
1.Model name: Z-20, 25, 27
2.General: An error was recorded in item no. 1 of Technical Report No. SP-1833 is a
supplementary explanation to be added.
3.Description: <Supplementary Explanation>
“The method of fixing the main harness with adhesive bond has been changed to a
convex method as an improvement measure” was recorded in the “General” section of
the Technical Report, but the change was actually carried out because the method
of using adhesive bond required too much time, decreasing the efficiency of operations.
<Recorded Error>
The parts code for the main motor was recorded in the parts list as shown below, but
this parts code is for the main motor as an individual part in itself (without gears, etc.
attached), and when ordering, the number, CMOTP0742FC5A listed in the parts guide
( 7 -1) should be used.
Note: The convex method is interchangeable with parts which have been fixed with
the adhesive bond method.
Current parts New parts
Parts code Parts code
CMOTP0742FC31 CMOTP0742FC32 AY
Please omit.
Ref.
No.
1
2
Model
name
Z-20
Z-25
Z-27
Version P/G No.
7
All
13 -34 VHIMC7805CT-2 VHIUPC7805H-1 AK IC [IC102]
Price
rank
Parts name
Main motor
harness AS
Effec-
tive
time
See
tex
Mid-
’94/9
Inter-
change-
ability
1
1
Note
Please make the above Technical Report revisions.
SHARP CORPORATION Reprography Division
Green
C
Loading...