SHARP SP1854 Technical Report

Date: Feb. 2, 1995

COPIER : SF-2014

1.CHANGE OF SCREWS (PARTS GUI DE CORRECTI ON ONLY)

2.CHANGE OF G RING (PARTS GUI DE CORRECTION ONLY)

3.ADDITION OF W A SHER IN TO NER HOPPER UNIT

1. Change of screws (parts guide correction only)

1.Model name: SF-2014, 2114, 2214
SN-1420, 1430 Z-800, for USA only

No. : SP-1854

2.General: Some screws have been changed in the model s above. Please correct the parts’ guide
only because the change has been done from the first unit of mass production.

3.Description: A. Changed (7) XHBSE40P10000 → XHBSE40P08000
B. Added XHBSE40P10000
C. Added XHBSE40P10000

SHARP CORPORATION Reprography Division

1/5

Green

C

D. Changed XEBSD30P08000 → XEBSD30P10000
E. Added XHBS E40P08000

F. Changed XEBSE40P12000 → XHBSD40P12000
G. Changed XHBSE40P06000 → XHBSE40P08000

H. Changed XHBSE40P06000 → XHBSE40P10000
I. Changed XHBSE40P06000 → XBPSD40P06K00
J. Added XHBSE40P10000
K. Discontinued (not attached)

4.Action: From the first unit of mass production

2/5