SHARP SP1845 Technical Report

Date: Nov. 30, 1994

COPIER: SF-7320

No. : SP-1845

ATTACHMENT TYPES SET IN TC CASE SUB SHEET

1.Model name: SF-7320, 7370

2.General: We made changes in the form of the TC case auxiliary mylar (insertion type) to prevent

papers coming into the TC case in the technical report (SP-1781). However, we found that this type of mylar cannot be attached to the models above because their sub sheet were the attachment types from the start of its mass production. Therefore we newly set the TC case sub sheet of the attachment types. (This is applied only to the service parts.)

3.Description: TC case sub sheet attachment position (This is as same as current attachment position.)

TC case sub sheet (x4) (PSHEP3830FCZZ)

Front side

TC case

Ref.

Model

No.

SF-7320 SF-7370

1. Interc ha ng ea bl e. 4. Not int erc h an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

speci fied ones fo r m ain taining t he s a fe ty and pe r fo r ma nce o f th e set.

name

Version P/G No.

20 -902 PSHEP2982FCZZ

All

Current parts New parts

Parts code Parts code

Rear side

PSHEP3830FCZZ

(Q’ty: 4)

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Effec-

tive

time

—3

Price

rank

TC case sub sheet

(attachment type)

Parts name

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green