SHARP SP1835 Technical Report
Date: Nov. 10, 1994
COPIER : SF-2022
1. ENHANCING THE QUANTITY OF LIGHT
2. CHANGE OF THE TRANSPORT HARNESS RELAY WIRE LENGTH
(TO IMPROVE PRODUCTIVITY)
3. CHANGE OF PROCESSING METHOD OF MANUAL ARM SHAFT 2
(TO IMPROVE PRODUCTIVITY)
No. : SP-1835
1. Enhancing the quantity of light
1.Model name: SF-2022, 2027, 1025
2.General: There has been no room for maximum value of the dispose adjustment. Therefore it
cannot work on rare occasion.
3.Description: We have shifted the center value of the quantity of light in the copy lamp to the current
maximum value in the specification.
Parts’ code has been also changed due to this change.
4.Action: From mid-August 1994 production
2. Change of the transport harness relay wire length (to improve productivity)
1.Model name: SF-2022, 2027, 2035, 1025
2.General: We have changed the manufacturer of the transport relay harness and its wire length.
3.Action: From the first unit of October 1994 production
3. Change of processing method of manual arm shaft 2 (to improve productivity)
1.Model name: SF-2022N, 2027N (All destinations except Australia)
SF-2035 (All destinations)
2.General: The processing method used in the manual paper feeding multi tray unit has been
changed. Its part’s code has been also changed.
Green
C
SHARP CORPORATION Reprography Division
1/2
3.Description:
Manual arm shaft 2 (changed)
4.Action: From the first unit of October 1994 production
Manual arm shaft 2 (changed)
Ref.
Model
No.
SF-2022
1
SF-2027
SF-1025
SF-2022
SF-2027
2
SF-2035
SF-1025
SF-2022N
SF-2027N
3
SF-2035 All
<Interchange>
1. Inte r cha ng eable. 4. Not i nt er changeab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fied ones fo r m ain ta in i ng t he s a fe ty an d pe r fo rma nc e o f th e s et .
name
Version P/G No.
100V
10 -3 RLMPU0494FCZZ RLMPU0494FCZ1 BC Copy lamp
series
200V
10 -3 RLMPU0495FCZZ RLMPU0495FCZ1 BC Copy lamp
series
7-3
All
All
destinations
except
Austr alia
31 -29
!
Current parts New parts
Parts code Parts code
DHAI-2045FCZZ DHAI-2045FC11 AL
NSFTZ1864FCZZ NSFTZ1864FCZ1 AB
Price
rank
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Othe rs .
Parts name
Transport
interface harness
Manual paper
feeding ARM
shaft 2
Effec-
tive
time
Mid-
’94/8
Mid-
’94/8
1st lot
’94/10
1st lot
’94/10
Inter-
change-
ability
3
3
1
1
Note
2/2
Loading...