SHARP SP1833 Technical Report

Date: Oct. 20, 1994

COPIER : Z-20

No. : SP-1833

1. CHANGES TO SECURING METHOD OF MAIN MOTOR HARNESS TO IMPROVE MARGIN

2. CHANGES TO PARTS CODE DUE TO PRODUCTION DISCONTINUANCE

1. Changes to securing method of main motor harness to improve margin

1.Model name: Z-20, 25, 27

2.General: The securing method of the main motor harness has been changed from bonding onto

a bracket to convex fillet welding. This is to improve the margin.

3.Description:

Changed from bonding onto a bracket to convex fillet welding.

4.Action: China : Mid-September 1994 production (Running change)

2. Changes to parts code due to production discontinuance

1.Model name: Z-20, 25, 27

2.General: Production of IC [IC 102] used on PCBs has been discontinued. A change has been

made to use replacement parts.

3.Description:

(Display)

7805CT

NEC

7805

VHIMC7805CT-2

4.Action: Mid-September 1994 production

SHARP CORPORATION Reprography Division

VHIUPC7805H-1

1/2

Green

Ref.

Model

No.

1. Intercha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified on es fo r m ai n ta in i ng t he s a fe ty and pe rfo r ma nc e o f th e s et .

name

Z-20 Z-25 Z-27

Version P/G No.

All

13 -34 VHIMC7805CT-2 VHIUPC7805H-1 AK IC [IC102]

Current parts New parts

Parts code Parts code

CMOTP0742FC31 CMOTP0742FC32 AY

Price

rank

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others .

Parts name

Main motor harness AS

Effec-

tive

time

See text.

Mid-

’94/9

Inter-

change-

ability

Note

2/2