![](/html/7c/7cd6/7cd6028dd9ed5a1511c4a016dee47582282725db2f6ac5fe37ac6f873e9d5ca1/bg1.png)
Date: Oct. 18, 1994
COPIER : Z-50
No. : SP-1831
COMMONLY USE OF COPY LAMP UNIT
(TO IMPROVE PRODUCTIVITY)
1.Model name: Z50 and 55, only for destination of 200V series
2.General: The copy lamp unit used in the model Z-52 also can be used in the models shown
above. Therefore we have been used this commonly among these models to improve
productivity.
3.Action: From the first unit of October 1994 production
Ref.
Model
No.
<Interchange>
1. Interc ha ng ea bl e. 4. Not int erc h an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fied on es fo r m ai n ta in ing the sa fe ty an d pe r fo rma nc e o f the set .
name
Z-50
Z-52
Version P/G No.
200V
series
3 -901
!
Current parts New parts
Parts code Parts code
CREFL0112FC33 CREFL0112FC42 BT Copy lamp unit
Effec-
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Parts name
rank
tive
time
1st lot
’94/10
Inter-
change-
ability
1
Note
SHARP CORPORATION Reprography Division
Green
C