
Date: Jun. 16, 1994
COPIER : SF-2022
1. PREVENTION OF BOSS BREAKAGE IN THE LENS CARRIAGE TO IMPROVE
PRODUCTIVITY
2. DISCONTINUANCE OF TABLE CUSHION AND CHANGES TO LENS DRIVE
PULLEY BOSS TO IMPROVE PRODUCTIVITY
3. CORRECTIONS TO MISPRINT IN TECHNICAL REPORT NO. SP-1526
No. : SP-1771
1. Prevention of boss breakage in the lens carriage to improve productivity
1.Model name: SF-2022, 2027, 2035, 2018, 1025
2.General: Spacers were added in Technical Report No. SP-1757. This was carried out to prevent
boss breakage caused by repeated cabinet opening and closing during paper jams. The
spacer has now been discontinued. Two ribs each have been added to strengthen both
sides of the cabinet. See diagram below.
3.Description:
Shaped padding
Discontinued paper discharge
cabinet spacer
Current paper discharge cabinet : GCAB0-752FCZ1
Bearing : NBRGY2111SCZZ
Paper discharge cabinet spacer : PSPAZ0654FCZZ
New paper discharge cabinet : GCAB-0752FCZ2
Bearing : NBRGY2111SCZZ
For details, see Technical Report No. SP-1757, page
Interchange between
this pair possible.
4. Action: From May 1994 production, 1st unit.
SHARP CORPORATION Reprography Division
1/3
Green
C

2. Discontinuance of table cushion and changes to lens drive pulley boss to improve
productivity
1.Model name: SF-2022, 2027, 2035, 2018, 1025
2.General: The table glass cushion (large) has been discontinued to improve productivity.
The boss shape for the lens drive pulley has been changed to improve operability.
3.Description: • Discontinuance of table cushion (large) for paper discharge only. (Table cushion for
paper supply has already been discontinued.)
• Changes to boss length for lens drive pulley (16.5 to 20.0) and discontinuance of E
ring groove Parts guide No. 12 -73 (Current and new bosses are interchangeable.
Parts code remain unchanged.)
4.Action: From May 1994 production, 1st unit.
3. Corrections to misprint in Technical Report No. SP-1526
1.General: There was a misprint in the parts lists for Technical Report No. SP-1526. The entries,
“Front side” and “Rear side” should be switched around.
2.Description: (Error)
Ref.
Model
No.
name
1
SF-2022
2027
2
Version P/G No.
14 -12 PCLR-0371FCZZ
All
14 -1 NROLP0919FCZZ
Current parts New parts
Parts code Parts code
PCLR-0371FCZZ AG
PCLR-0382FCZZ AG
NROLP0919FCZZ AM Roller S 1
NROLP0961FCZZ AM Roller SV 3 Q’ty: 1
Price
rank
Parts name
DSD collar
(Front side)
DSD collar
(Rear side)
Switch around
Effec-
Inter-
tive
change-
time
ability
1st lot
1
3 Q’ty: 1
(Correction)
Ref.
No.
1
2
Model
name
SF-2022
2027
Version P/G No.
14 -12 PCLR-0371FCZZ
All
14 -1 NROLP0919FCZZ
Current parts New parts
Parts code Parts code
PCLR-0371FCZZ AG
PCLR-0382FCZZ AG
NROLP0919FCZZ AM Roller S 1
NROLP0961FCZZ AM Roller SV 3 Q’ty: 1
Price
rank
Parts name
DSD collar
(Rear side)
DSD collar
(Front side)
Effec-
tive
time
1st lot
Inter-
change-
ability
1
3 Q’ty: 1
Note
Q’ty:
2 to 1
Q’ty:
2 to 1
Note
Q’ty:
2 to 1
Q’ty:
2 to 1
2/3

Ref.
Model
No.
SF-2022
1
SF-2027
SF-2035
SF-2018
SF-1025
2
<Interchange>
1. In te r cha ngeable. 4. Not i nt er c h an ge ab le.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specifie d on es for maintaini ng t he s a fe ty an d pe rformance of the set .
name
Version P/G No.
6-1
6
ALL
12 -15 PGUMS0174FCZZ Discontinued —
!
Current parts New parts
Parts code Parts code
GCAB-0752FCZ1 GCAB-0752FCZ2 AX Delivery exterior
PSPAZ0654FCZZ Discontinued —
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Ot he r s.
Parts name
rank
Paper discharge
cabinet spacer
Table glass
cushion
Effec-
tive
time
1st lot
’94/5
Inter-
change-
ability
3
— Q’ty: 2
—
Note
3/3