SHARP SP1768 Technical Report

Date: Jun. 30, 1994

COPIER : Z-20

1. UNIFICATION OF HANDLE HOLDER COLOR TO IMPROVE PRODUCTIVITY

2. PERMANENT MEASURES FOR PREVENTION OF INK RUBBING ON PRINTED WHITE CARTONS AND REINFORCEMENT OF HAND CARRY HOLES

1. Unification of handle holder color to improve productivity

1.Model name: Z-20, 23, 25

2.General: Two of the three colors used for the handle holder have been discontinued: frosty gray

and calm gray. Changes have been made to unify the handle holder color to urban gray. This is to improve productivity.

No. : SP-1768

3.Description: Z-20: Japan, U.S.A., Canada, Australia, Indonesia and all other general agents Z-23: All des tinations Z-25: U.S.A., Canada, Australia, Indonesia and all other general agents

4.Action: Mid-May 1994 production (Running change)

2. Permanent measures for prevention of ink rub-off on printed white cartons and reinforcement of hand carry holes.

1.Model name: Z-20, 25, 27, 52II, 57II, 77, 85II, 88

2.General: Ink rub-off on printed white cartons bound for Xerox USA have been reported.

Permanent measures have now been made to prevent ink rub-off. This measure has been enforced for all white cartons including those with SHARP specifications.

3.Description: <Permanent measures to prevent ink rub-off> As a permanent measure, OP varnish has been added to the carton surface (packing case). However, varnish has not been added to the top and bottom surface of the carton.

SHARP CORPORATION Reprography Division

1/2

Green



(5280) (5310)

(5009R/E)

Mount paper reinforcement on rear face

(5309)

4.Action: Prevention of ink rub-off: May 1994 production, 1st unit

Ref.

Model

No.

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

sp ec i fi e d on es fo r m ai n ta in i ng t he s a fe ty an d perfo r ma nce o f th e s et .

name

Z-20

Z-23 All

Z-25

Version P/G No.

U.S.A. Canada

Australia Indonesia and all agents

U.S.A. Canada Australia

Indonesia and all agents

1 -12

1 -13

1 -12 1 -13

1 -12

1 -13

Current parts New parts

Parts code Parts code

LHLDZ1168FCZZ LHLDZ1168FCAZ AB Handle holder R

LHLDZ1167FCZZ LHLDZ1167FCAZ AB Handle holder L 1

LHLDZ1168FCKZ LHLDZ1168FCAZ AB Handle holder R 1 LHLDZ1167FCKZ LHLDZ1167FCAZ AB Handle holder L 1

LHLDZ1168FCZZ LHLDZ1168FCAZ AB Handle holder R 1

LHLDZ1167FCZZ LHLDZ1167FCAZ AB Handle holder L 1

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others .

Price

rank

Mount tape reinforcement on rear face below the hand carry hole

Effec-

Parts name

tive

time

See text.

Inter-

change-

ability

Note

2/2