SHARP SP1754 Technical Report

Date: May. 18, 1994

COPIER : Z-52

No. : SP-1754

TROUBLE SHOOTING DISLOCATION OF THE
FEEDER SWITCH.

1.Model name: Z-52, 52 II, 57, 57 II

2.General: Contact is sometimes made with the fixing teeth of the feeder switch (MS 1-3) when

installing the right side of the cabinet, causing the feeder switch to become dislocated.
To prevent this problem from occurring, “Screw Lock” has been added.

3.Description:

Applied
"Screw lock"

<“Screw Lock” to be used>

Three Pound 1401 B
YRESNHMP007CC (ap pr ox 0. 1g) Sumitomo 3M

4.Action: From 1994 April production.

MS1-3

PG-C

“Screw Lock” should be applied in the
location shown in the diagram to the
left. Approximately 0.1g should be
applied.

<Caution>

When applying “Screw Lock” care
should be exercised so that the
“Screw Lock” does not come in
contact with any of the other parts.

SHARP CORPORATION Reprography Division

Green

C