SHARP SP1737 Technical Report

Date: May. 10, 1994

COPIER : Z-88

TROUBLE SHOOTING THE PROBLEM OF THE VENTILLATION
FAN WIRE BECOMING CAUGHT IN THE F AN.

No. : SP-1737

1.Model name: Z-88, SF-2010

2.General: In order to fix the ventilation fan motor lead wire a molt has been added to hold the lead

wire down.

3.Description: The molt should be added to the location as shown in the figure below .

Fan motor

P

Lead wire

Motor base plate

* Molt

1mm

A

0.5mm

1mm

Enlarged figure of P

Added Fan molt
(PMLT-0945FCZZ)

Sagging (NG)

1mm

• The lead wire should be pulled in the direction of arrow A , until the problem of
sagging is alleviated. The molt should then be attached.
(Please refer to the enlarged figure of P for the attachment standard of them molt).

<Caution>

• Make sure that the sagging of the lead wire does not extend out of the fan case.

• The molt should be attached firmly.

4.Action: From 1994 Mid-February production.

SHARP CORPORATION Reprography Division

1/2

Green

C

Ref.

Model

No.

1

SF-2010

<Interchange>

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

speci fied ones fo r m ain taining t he s a fe ty and per fo rmance o f th e s et .

Version P/G No.

name

Z-88

New type cannot be used in place of current type.

New type can be used in place of current type.

6

All

7

!

Current parts New parts

Parts code Parts code

— PMLT-0945FCZZ AA Fan molt

Price

rank

5. Interchangeable if replaced with same types of
relate d parts in use .

6. Others .

Parts name

Effec-

tive

time

Mid-

’94/2

Inter-

change-

ability

—

Note

New
parts

2/2