SHARP SP1696 Technical Report

Date: Feb. 16, 1994

COPIER : SF-2022

[Parts change information]

CHANGE IN PARTS TO IMPROVE PRODUCTIVITY.

1.General: The parts changes described below have been carried out on models in the SF-20XX

series to improve productivity.

2.Description: 1. Change in the stopper in the vertical transport unit.
The stopper attached to the drive shaft of the vertical transport unit has been changed
to an E-ring made of plastic.

LSTPP0279FCZZ → PRNGP0081FCZZ Q’ty: 1
(stopper) (plastic E-ring)
Model names : SF-2022 / 2027 / 2035
Factory action : From 1994 March production.

No. : SP-1696

2. Change in parts in the manual tray.
The front side of the manual rack B9 assembly has been changed, the guide load
adjustment plate has been discontinued and the manual guide brake sheet has been
changed.

Changed manual brake sheet.

Changed manual
rack B9 assembly.

Discontinued guide load adjustment plate.

SHARP CORPORATION Reprography Division

1/3

Green

C

Attachment location of the brake sheet.

Coucave
area

Changed brake sheet
attachment location.

PGIDM1456FCZZ

Back side of the manual guide AL.

Current manual brake sheet.

Model names : SF-2022N / 2027N / 2035

(Except SF-2027 / 2022 models bound for Australia, Hong Kong,
Singapore and Thailand).

Factory action : From 1994 February production.

3. Changed DC power supply circuit board (U.K. only) - - - - Allother destinations have

already been changed.

CPWBF0944FC31 CPWBF0944FC32

Model name : SF-2022 / 2027
Factory action : From 1994 February produciton.

2/3