SHARP SP1695 Technical Report

Date: Feb. 16, 1994

COPIER : Z-30

No. : SP-1695

1. CHANGE IN MAKER OF THE HIGH VOLTAGE UNIT. 2 CHANGE IN MAKER OF POWER SUPPLY CIRCUIT

BOARD (200 V SERIES).

1.General: A change in the makers of the high voltage unit and the power supply circuit board used

in model Z-30 has been carried out.

2.Description: The parts codes for the parts listed below have been changed in accordance with the change in makers described above.

High voltage unit: RTRNZ0406FCZZ RTRNZ0484FCZZ Power Supply PWB (220 V): CPWBF0706FC35 CPWBF0706FC38 Power Supply PWB (240 V): CPWBF0706FC36 CPWBF0706FC39

3.Action: (Factory action)

High voltage unit: From 1994 March production. Power supply circuit board: From 1994 January production.

Ref.

Model

No.

1 Z-30 All

2 Z-30

1. Interc ha ng ea bl e. 4. Not int erc h an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

s p eci fi e d on es fo r m ai n ta in i ng t he s a fe ty an d pe rf o rma nc e o f th e s et .

name

Version P/G No.

220V

240V

5-3 2-6

13 -901

2-6

13 -901

Current parts New parts

Parts code Parts code

RTRNZ0406FCZZ RTRNZ0484FCZZ BR High voltage unit ’94/3 1

CPWBF0706FC35 CPWBF0706FC38 BY

CPWBF0706FC36 CPWBF0706FC39 BY

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Parts name

rank

Power Supply PWB

Effec-

tive

change-

time

’94/1 1

Interability

Note

SHARP CORPORATION Reprography Division

Green