SHARP SP1677W Technical Report

Figure

avail-

Discription

Effec-

tive

Inter-

change-

ability

time

ability

The packing material has been changed to

improve productivity.

B 1 ’93/6

The same change has been carried out for the

SF-9500 and the maintenance kit.

The right cabinet assembly code has been

“8875" has been added to the model number

changed in accordance with the combination of

label for use with model SF-8875.

B 1 ’93/6

Fig. 1

the FCC certification label and the special

licensing certification label.

”8875" has been added to the model number

label for use with model SF-8875.

The plastic washer has been added to prevent

The same change has been made for models

8800, 8500 and 8570.

From

The upper three lines of the parts codes have

grinding damage to the clutch assembly shaft

1993

been changed from 0DN to 0DE in accordance

of drive unit A.

Mid-July.

A—

Table 1.

with the change in maker of the

operationalpanel unit. The bottom lines of the

parts codes have not been changed and

remain unchanged.

Parts name Cause

Price

rank

Upper CL roller unit.

CROLN0586FC31 CROLN0586FC34 BH

13 -51

13 -501 CROLN0856FC32 CROLN0856FC34 BH

Plastic washer.

TLABZ2885FCZZ TLABZ3452FCZZ AB Model number label W. E 1 ’93/7

All

8 -4 CROLN0430FC31 CROLN0430FC33 BL

10 -34 TLABZ2797FCZZ TLABZ3425FCZZ AA Model number label E. D 1 ’93/7

1 -20 USA CCAB-0571FC01 CCAB-0571FC02 AY Right cabinet assembly. E 1 ’93/7

20 -35

19 -18 TLABZ2885FCZZ TLABZ3449FCZZ AB Model number label X. E 1 ’93/7

11 — LX-WZ0393FCZZ AA

All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type. 5. Interchangeable if replaced with same types of related parts in use.

3. Current type cannot be used in place of new type. New type can be used in place of current type. 6. Others.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

2 0DN- - - - - - - - - - 0DE- - - - - - - - - - D 1

2/4

Ref.

Model name Subject P/G No. Version Current New

No.

Change in packing method for

the upper CL roller unit.

8800

SF- 8870

SF- 8570

SF- 9400

SF- 9800

Change in model number

label for the DV unit.

9750

9700

8875

SF- 8870

Change in model number

Change in the right cabinet.

label for the cassette unit.

8870

SF- 9400

8870 Others

Change in parts codes for the

Addition of plastic washer to

drive unit A.

SF- 9400 5

operation panel.

SF-9400

8870/8570

8800/8500

A : Quality improvement

B : Productivity improvement

C : Operability improvement

D : Convenience of parts procurement

E : Standardization

Reason for cause

F : Serviceability improvement

G : Correction to parts guide