SHARP SP1677 Technical Report

Date: Jan. 31, 1994

COPIER : SF-9400

No. : SP-1677

CHANGE IN PARTS (SF-8800 SERIES).

1.General: Var ious parts changes have been carried out on model SF-9400 and the SF-8800

series.

2.Description: Item. Model. Change.

1. SF-8870 etc. Change in packing method for the upper CL roller unit.

2. SF-8870, 8875 Change in model number label for the DV unit.

3. SF-9400, 8870 Change in the right cabinet.

4. SF-9400, 8870 etc. Change in model number label for the cassette unit.

5. SF-9400 Addition of plastic washer to drive unit A.

6. SF-9400, 8870, 8570,
8800, 8500 Change in parts codes for the operation panel.

SHARP CORPORATION Reprography Division

1/4

Green

C

Item 5: Addition of plastic washer to drive unit A.

Added plastic washer.

Fig. 1

* The following instructions should be followed for adding the plastic washer to

machines already out on the market.

C (0.1 mm)

spacer.

Spring.

Space.

Clutch
(PCLC-0141FCZZ).

E ring.

Added plastic washer
(LX-WZ0393FCZZ).

Gear.

Shaft.

Boss.

Insect screw.

➀ Loosen the insect screw of the clutch and add the plastic washer.
➁ Insert the 0.1mm spacer into the C area, and while pressing the shaft in the direction

of arrow A and the boss in the direction of arrow B, tighten the insect screw.

3/4