SHARP SP1675W Technical Report

avail-

Figure

Discription

Effec-

tive

Inter-

change-

X

ability

The right lower frame and trans board have

been combined.

time

ability

X

To establish compatibility with the parts of

models SF-7370 and 7320.

X

Coupling spring H has been changed to

achieve better operationability when attaching

X

the spring in the production process.

The dispersion of various parts make

attaching the lock teeth holder very difficult.

To remedy this problem, the length of the

attachment screws has been changed.

Parts name Cause

Price

rank

CFRM-0498FC02 LFRM-0498FCZ1 AV Right lower frame. B 1 ’92/12

22 -15

!

13 -16 XEPSD30P06000 XEPSD30P08000 AA Screws (M3 x 8 P-tight). C 1 ’93/11

XEPSD30P06000 XEPSD30P08000 AA Screws (M3 x 8 P-tight). C 1 ’93/11 X

13 -16

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type. 5. Interchangeable if replaced with same types of related parts in use.

3. Current type cannot be used in place of new type. New type can be used in place of current type. 6. Others.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

MSPRC1298FCZZ MSPRC2120FCZZ AA Coupling spring H. C 1 ’93/7

All

4 -13 CDAIU0314FC04 CDAIU0314FC06 BS Motor base plate. D 1 ’93/1 X

22 -15 LFRM-0498FCZZ LFRM-0498FCZ1 AV Right lower frame. B 1 ’92/12 X

13 -17 LSTYM0117FCZZ LSTYM0117FCZ1 AF DR frame stay I. E 1 ’93/10

6 -12

6 -12 MSPRC1298FCZZ MSPRC2120FCZZ AA Coupling spring H. C 1 ’93/7 X

2/2

Ref.

Change in the right lower

frame.

SF-7370

Model name Subject P/G No. Version Current New

1

No.

Change in the base plate of

the motor.

Change in the DR frame stay

I.

7300

7300

SF-7320

SF-7350

SF-7350

2

3

Change in coupling spring H

in the upper frame area.

7320

7350

SF-7370

4

Change in the attachment

screws for the lock tooth

7320

7300

SF-7370

5

holder in the drum unit.

7300

SF-7350

A : Quality improvement

B : Productivity improvement

C : Operability improvement

Reason for cause

D : Convenience of parts procurement

E : Standardization

F : Serviceability improvement

G : Correction to parts guide