Figure
avail-
Discription
ability
The addition of this sheet was reported in
Fig. 1
To establish compatibility with model Z - 88
(SF-2010).
To establish compatibility with model Z - 88
Technical Report SP-1491.
The sheet has been changed.
(SF-2010).
Fig. 2
Fig. 3
Fig. 4
Mylar has been added to prevent the pressure
fixing roller from slipping in the direction of the
X
slide.
X
Effec-
tive
Inter-
change-
Parts name Cause
Price
time
ability
E 1 ’92/11
E 1 ’92/11
No. 6 mirror adjustment
No 6 mirror adjustment screw
sheet AS.
rank
screws.
1st lot.
’92/9
1st lot.
1992
Mid-Sep.
Running
change
from
1993
July.
1st lot.
2/7
Ref.
Model name Subject P/G No. Version Current New
No.
PSHEP3222FCZZ CSHEZ3322FC01 AD
3
3 -55 LX-BZ0637FCZZ LX-BZ0691FCZZ AD
3 -36 XNESF40-32000 XNGSF40-24000 AA Nut M4. E 1 ’92/11
Change in No. 6 mirror parts
in the optical unit.
1 Z-85
— PSHEZ3196FCZZ AB Frame noise reduction sheet. G —
8
Z-85
— LX-BZ0214FCZZ AC Wave washer. G —
7
8
Addition of noise reduction
sheet, wave washer and
packing mylar in the lower
Z-85
Z-52/57
2
7 ’92/9
frame area.
Z-52/57
8 — PSHEP3221FCZZ AC Packing mylar. A —
Z-85
PCUSG0190FCZZ PCUSG0190FCZ1 AB Table glass cushion. B 1
All
3 -58
5 -58
3 -58 PCUSG0190FCZZ PCUSG0190FCZ1 AB Table glass cushion. B 1 X
Change in table cushion in
the optical unit.
SF-2010
Z-88
Z-85
Z-88
3
3-5
Z-88
SF-2010
LDAIU0444FCZZ LDAIU0444FCZ1 AD Lamp connection housing R. G 1
4-5 ’93/1
Change in copy lamp unit
Z-85, 85II
SF-2010 4 -5 LDAIU0444FCZZ LDAIU0444FCZ1 AD Lamp connection housing R. G 1 1st lot. X
PSHEZ3087FCZZ PSHEZ3087FCZ1 AV OC mat. B 1 ’93/4 X
2-3
Change in the OC mat.
Z-85II
4
parts.
5
3 -10
CDAIU0443FC01 LDAIU0443FCZ1 AK Lamp connection housing F G 1 1st lot. X
Z-88
4 -10
LHLDZ0758FCZZ LHLDZ0758FCZ1 AH MSW holder. G 1 1st lot. X
4 -10 CDAIU0443FC01 LDAIU0443FCZ1 AK G 1 1st lot. X
6 -60
5 -21
Change in MSW holder in the
upper frame area.
SF-2010
Z-88
SF-2010
Z-85
6
Figure
avail-
Discription
Effec-
tive
Inter-
change-
ability
time
ability
X
Changed to the lower frame F, R used in
model Z-88.
Natural
January.
from 1993
conversion
X
Change in thickness of the noise reduction
sheet (t 2 → t0.5). The following models have
also been changed: Z-50, 55, 70, 72, 75, 76,
77, SF-6100.
’92/5
B1
X
X
The washer has been eliminated in
accordance with the change in the width of
the roller (4 locations). (roller width: 10m →
11.8).
Fig. 5
A block was attached to the lower frame plate
of model Z-88 from the first production lot, but
The sheet has been added to insulate the
dark box from the edge of the AE sensor
circuit board.
it has been eliminated in the total
1993.
Mid-Jul.
B 5 ’93/9
Fig. 6
manufacturing change. Consideration was
also given to metal pattern compatibility with
models Z-52 / 85, and the same changes
were carried out, but the parts codes have not
been changed.
1993.
Mid-Jul.
X
To establish compatibility with model Z-88,
the following models have also been
X
A change has been made to a softer material,
to prevent other parts from being damaged
changed: Z-52 (II) / 57 (II), Z-50 series, 70
series, SF-6100.
when the roller locks. Refer to Technical
change
Running
from 1993
C1
X
A diode has been added in the HIC to prevent
it from being damaged by static electricity,
Report SP-1532.
February.
etc.
Parts name Cause
Price
rank
LHLDZ0758FCZZ LHLDZ0758FCZ1 AM MSW holder. G 1 1sr lot. X
7 -60
8 -34
Paper guide C noise
reduction sheet.
Washer.
Lower frame plate (calm
gray).
— PSHEP3468FCZZ AE AE insulation sheet. A — ’93/6
CFRM-0719FC01 CFRM-0719FC02 AS Lower frame front assembly. E 1
CFRM-0721FC01 CFRM-0721FC02 AS Lower frame right assembly. E 1 X
PCUSF0165FCZZ PSHEZ3224FCZZ AA
All
7 -34
8 -29
7 -29
7 -68
7 -71 NROLP0924FCZZ NROLP0924FCZ1 AC Roller.
7 -72 XWHSD40-08100 Discontinued —
3
4
4 — PSHEP3468FCZZ AE AE insulation sheet. A — ’93/6
8 -50 LFRM-0718FCZ1 LFRM-0718FCZ3 BC Lower frame plate (gray). C 1
8 -50 LFRM-0718FCK1 LFRM-0718FCK3 BC
8 -50 LFRM-0718FCN1 LFRM-0718FCN3 BC Lower frame plate (OA gray). C 1 ’93/5
8 -30 NBRGP0260FCZZ NBRGP0260FCZ1 AD Pressure bearing socket. E 1
7 -23 NGERH0383FCZZ NGERH0383FCZ1 AD Gear 26 T. A 1
7 -23 NGERH0383FCZZ NGERH0383FCZ1 AD Gear 26 T. A 1 X
13 -19 VHIMHIK-1//-1 VHIMHIK-1//-2 AX HIC A 3 ’93/9
Change in MSW holder in the
upper frame area.
Model name Subject P/G No. Version Current New
6 OWL1, 2, 3
No.
Ref.
Change in lower frame F, R.
Z-52/57
(II include)
Z-85/85II
Z-85/85II
7
Change in the noise reduction
sheet of paper guide C.
Z-85
Z-52(II)/57(II) 6 -68 ’92/12
Z-52/57(II)
8
Addition of insulation sheet to
the AE sensor in the copy
Z-88
lamp unit.
Z-85/85II
10
Change in the roller width of
paper guide C.
Z-85/85II
Z-85/85II
9
SF-2010
Change in the pressure
bearing socket of the fixing
Change in shape of the lower
frame.
Z-88
SF-2010
11
unit.
12 Z-85(II)
Change in the 26 T gear of
the lower frame R area.
Z-88/85II
SF-2010
13
Change in HIC in the CLR
circuit board.
Z-52(II)
57(II)
Z-88
70 series
14
3/7
60 series
Figure
avail-
Discription
Effec-
tive
Inter-
change-
ability
time
ability
Parts name Cause
Price
rank
— PSHEP3283FCZZ AB MF sheet B9 G — 1st lot. Fig. 7
All
<Interchange>
1. Interchangeable. 4. Not interchangeable.
9
3
5 — PSHEP3370FCZZ AB No. 4 mirror shield sheet G — 1st lot. Fig. 8
!
2. Current type can be used in place of new type. New type cannot be used in place of current type. 5. Interchangeable if replaced with same types of related parts in use.
3. Current type cannot be used in place of new type. New type can be used in place of current type. 6. Others.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
4/7
Ref.
Addition of sheet in the
Model name Subject P/G No. Version Current New
Z-88
No.
Addition of No.4 mirror shield
manual paper feeding unit.
15
sheet in the optical unit.
SF-2010
16 Z-88
Reason for cause
A : Quality improvement
B : Productivity improvement
C : Operability improvement
D : Convenience of parts procurement
E : Standardization
F : Serviceability improvement
G : Correction to parts guide
Loading...