SHARP SP1661 Technical Report

Date: Dec. 2, 1993

COPIER : SF-2022

No. : SP-1661

[Parts change information]

PARTS CHANGES WITHIN THE OPTICAL UNIT TO
PROMOTE PRODUCTIVITY
(EXPORT 200V SERIES MACHINES MACHINES ONLY)

1.Model name: SF-2022/2027 (Export 200V series machines only)

2.General: Owing to the reason mentioned next, some components in the optical units are

changed.

3.Reason: This is to promote productivity.

4.Description: 1. Change in the takeup shaft

a. Discontinued use washer (front side)
b. Relocation of the E-ring slit towards inner side as much as the washer thickness

after the discontinued use of the washer.

Washer: Discontinued

Change in the takeup shaft

NSFTZ1996FCZZ
NSFTZ2038FCZZ

SHARP CORPORATION Reprography Division

1/3

Green

C

2. MB cushion structural change

MB cushion structural change

PCUSS0276FCZZ PCUSS0292FCZZ

3. Discontinued use of table glass rubber B9 (q’ty change from 5 to 4)

Table glass rubber: Discontinued to use

The table glass rubber is not
pasted in this location.

2/3