SHARP SP1658 Technical Report

Date: Dec. 28, 1993
COPIER : SF-2022
MAIN ROM SOFTWARE CHANGE.
1. EXCEEDINGLY HIGH NUMBER OF JAMS.
2. CHANGE IN DETECTION OF H TROUBLE DUE TO NOISE .
3. TIME AUTOMATIC CLEARING AFTER EXCESS PAPER HAS BEEN NEGLECTED.
No. : SP-1658
1.Model name: SF-2022 / 2027
2.General: Software has been changed to remedy the problems described below encountered with
the SF-2022 / 2027.
1-2. The PPD2 Jam count is exceedingly high, even though almost no jams have
occurred.
3. When W-feed duplex paper feeding is used during double side copy operations, excess paper remains after ADU paper discharge. If this excess paper is neglected, the time automatic clearing function goes into effect, cancelling all modes and activating the mandatory ADU paper discharge made.
4.Reason and Description:
1-1. The jam counter registers a count each time the main power switch is turned on / off
without removing the paper that has jammed. It also registers a count each time the right cabinet of the ADF / Desk is opened / closed. The bug in the software has been corrected .
1-2. When a jam occurs while the PPD2 is ON, and if the PPD2 is turned OFF due to
motor inertia within 0.4 seconds, the flow revolutions occurring during the remaining time are counted. The bug in the software has been corrected.
2. To prevent detection misses of H trouble (H3, H4) due to noise, detection is changed in the software.
3. The time automatic clear function has been changed so that it does not go into effect when copy paper is left remaining in the ADU.
The main ROM version and parts codes and the main PWB parts codes have been changed in accordance with the changes described above.
SHARP CORPORATION Reprography Division
1/2
Green
C
ROM Version Ver. 6.02 Ver. 6.03 ROM Parts codes VHI27C01011FC VHI27C01020FC Main PWB parts codes CPWBN0928FC55 CPWBN0928FC58
5.Action: (Factory action) SF-2027 : From 1993 October production. SF-2022 (USA) : From 1993 November production.
(Other) : From 1993 October production.
Old New
Ref.
Model
No.
SF-2022
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fi e d on es for m aintaini ng t he s a fe ty and pe r fo r ma nce o f the s et .
name
2027
Version P/G No.
32 -67
All
9-4
32 -901
!
Current parts New parts
Parts code Parts code
VHI27C01011FC VHI27C01020FC AY ROM (Ver 6.03)
CPWBN0928FC55 CPWBN0928FC58 CA Main PWB 6
Price
5. Interchangeable if replaced with same types of relate d parts in use .
6. Ot he r s. ( The e x i sti ng m a in PW B ca n be u s ed , i f its ROM is replaced with the new version ROM.)
Parts name
rank
Effec-
tive
time
See text.
Inter-
change-
ability
3
Note
See T/R
SP-1634
2/2
Loading...