Date: Dec. 2, 1993
OPTION : SF-S51
No. : SP-1654
[Service information]
1. IDLER PULLEY CHANGE (TO IMPROVE PRODUCTIVITY)
AND T/R CORRECTION (SF-S51 / S53).
2. SERVIC E PARTS ESTABLISHMENT (SF-S52 / S15 / S16).
1. Idler pulley change (to improve productivity) and T/R correction (SF-S51 / S53)
1.Model name: SF-S51 / S53
2.General: The change in the SF-S51 idler pulley was reported in T/R PPC-1634 (SP-1564). In
fact, however, the change was not implemented, and the correction of the technical
report and the actual change, implemented this time is hereby reported once again. In
accordance with this change, the parts code listed in the parts guide for SF-S43 is
mistaken.
3.Reasons: The idler pulley has been changed to improve productivity.
4.Description: The idler pulley of the conveyor unit of SF-S51 / S53 has been changed from a bearing
type to a sintered alloy type.
SF-S51 (T/R correction and actual change).
Change.
Change.
Mistaken (SP-1564) Corrected (Actual change)
0GZFS23027000
(Idler pulley)
↓
0GZFE90230000
(Idler pulley 2)
0GZFS23027000
(Idler pulley)
↓
0GZFS23027010
(Idler pulley 1)
0GZFS23027000
(Idler pulley)
↓
0GZFS23027010
(Idler pulley 1)
The parts code has been
changed as shown at left
in accordance with the
actual change,
implemented this time.
In accordance with the idler pulley change, both 13a and 13b have been changed as
follows: 0GZFS23027000 — 0GZFS23027010.
SHARP CORPORATION Reprography Division
1/4
Green
C
SF-S53 (Parts guide correction and actual change).
0GZFE90230000 (P/G listing).
↓ P/G crection.
0GZFS23027000 (From the first production lot).
↓ Actual change at this time.
0GZFS23027010 (From 1993 December production).
0GZFS23027010 (P/G listing).
↓ P/G correction.
0GZFS23027000
(From the first production lot).
↓ Actual change at this time.
0GZFS23027010
(From 1993 December production).
5.Effective time: (Factory action)
From 1993 December production.
2. Service parts establishment (SF-S52 / S15 / S16).
1.Model name: SF-S52 / S15 / S16
2.General: The parts listed below have been supplied in consideration of better market
serviceability.
3.Description: 1. The SF-S52 reinforcement plate and carrier frame F/R.
2. The SF-S315 / 316 sorter base joint S plate and screws.
1. SF-S52
Included reinforcement plate. (00Q42902276-0)
2/4
Carrier frame F. (00Q42902556-0)
Carrier frame R. (00Q42902577-0)
2. SF-S15 / S16
The sorter base joint S plate is fastened by screws, and has therefore been
supplied as a service part.
Screws (M 4 x 8).
Screws (M 4 x 8).
(0CW040080FBBP)
(0CW040080FBBP)
Joint S plate.
(0CW4043P054A/)
Sorter base.
Sorter base.
SF-S15 SF-S16
Screws (M 4 x 8).
(0CW040080FBBP)
Joint S plate H.
(0CW4050P061A/)
Sorter base.
3/4
Ref.
Model
No.
SF-S51
SF-S53
1
SF-S51
SF-S53
SF-S52
2
SF-S15
SF-S16
<Interchange>
1. Intercha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
sp ec i fie d ones fo r mai n ta in i ng t he s a fe ty an d pe rf o rma nc e o f th e s et .
name
Version P/G No.
6 -139
5 -48
6 -136
5 -13
5
All
3
3
4
4
4
4
!
Current parts New parts
Parts code Parts code
0GZFS23027010
0GZFS23027010 AS Idler pulley 1 ’93/12 1 Q’ty: 2
0GZFE9023000
— 00Q42902276-0 BF
— 00Q42902557-0 BS Carrier frame R — — Q’ty: 1
— 00Q42902556-0 BR Carrier frame F — — Q’ty: 1
— 0CW4043P054A/ AF Joint S plate — — Q’ty: 1
— 0CW040080FBBP AA Screws (M 4 x 8) — — Q’ty: 1
— 0CW4050P061A/ AF Joint S plate H — — Q’ty: 1
— 0CW040080FBBP AA Screws (M 4 x 8) — — Q’ty: 1
Price
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others.
Parts name
rank
Reinforcement
plate
Effec-
tive
time
— — Q’ty: 1
Inter-
change-
ability
Note
4/4
Loading...