SHARP SP1644 Technical Report

Date: Oct. 18, 1993
COPIER : Z-88
No. : SP-1644
CHANGE OF PF ROLLER A TO PREVENT
RUBBER PACKING SLIPPAGE
1.Model name: Z-88 / SF-2010 / Z-52 / 52II / 57 / 57II / Z-85 /85II /75 / 72 /77 /SF-6100
2.General: Until now, glue has been applied to prevent the rubber packing in the PF roller A in
models Z-88/SF-2010 from slipping. This practice has been discontinued, and instead the shapes of the rubber packing and the rollers have been changed. For Z-88/SF-2010 models, this change has standardized metal patterns.
3.Cause: Standardization and prevention of PF roller A rubber packing slippage.
changed as shown in the diagram below. Along with these changes, glue is no longer used in models Z-88/SF-2010.
PF roller A
Cut
Rubber packing for the PF roller A
* Shaded areas to be added.
➀➅➁
As shown in the diagram to the left, glue was applied in 6 places in models Z-88/SF-2010. Shape changes for the PF roller A and the rubber packing will make using glue unnecessary.
SHARP CORPORATION Reprography Division
1/2
Green
C
5.Effective time: (Production): Mid- October, 1993 (including SMF).
Ref.
Model
No.
Z- 52(II)
Z- 85(II) Z- 72, 75 SF-6100 Z- 88
SF-2010
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t ype . New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p la ce of cu r ren t ty p e.
Parts m ar ke d wi t h “ ” is i mp ort an t fo r ma in ta i ning t he s a fe ty of t he se t. Be su r e to re pl ac e t he se pa r ts wit h
specified ones for maintaining the safety and performance of the set.
name
57(II)
76, 77
Version P/G No.
7 -40
8 -40
All
8 -27
8 -40
!
Current parts New parts
Parts code Parts code
CROLR0514FC01
CROLR0514FC03 AS PF roller A
CROLR0514FC02
Price
5. Interchangeable if replaced with same types of relate d parts in use .
6. Others.
Parts name
rank
Effec-
tive
time
Mid­Oct.
1993
Inter-
change-
ability
1
Note
2/2
Loading...