SHARP SP1605 Technical Report
Date: Oct. 21, 1993
COPIER : Z-88
No. : SP-1605
PREVENTING THE ORIGINAL COVER MAT FROM
SEPARATING AT UNPACKING
1.Model name: Z-88 / SF-2010
2.General: To prevent possible separation of the mat from the original cover during unpacking, a
new material is used for the packing material.
3.Cause: Since there is a clearance of about 15mm between the original cover mat and the table
glass kept by the cushion when packed, the center of the mat hangs down, which
causes to separate double tack tapes attached at four corners of the MAT, depending
on situation.
Original cover
Z-88
Original cover mat
28mm
4.Description: The thickness of the original cover cushion is reduced to get rid of the clearance
between the mat and the table glass in order to prevent it from being separated. After
this change in the thickness of the original cover cushion, the thickness is increased at
the original cover holding area of the top cushion.
Original cover cushion
14mm
The original cover cushion is changed
from 28mm to 14mm thick.
Z-88
SHARP CORPORATION Reprography Division
1/2
Green
C
NOTE: F or this trouble can only occur only at the time of unpacking the machine and it
would never be separated after unpacked as the original cover mat is pressed by the
weight of the original cover.
5.Action: (Factory action)
Since May 1993, including the SMF production.
Top cushion
The height of the original cover holding
area is increased 14mm more.
t14
Ref.
Model
No.
SF-2010
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe .
New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe.
New t y pe c a n be u sed in p la ce of curr en t ty p e.
Parts m ar ke d wi t h “ ” is i mpor t an t fo r m a in ta i ning t he s a fe ty of the s e t. B e su r e to re pl ace these pa rts with
specified ones for maintaining the safety and performance of the set.
name
Z-88
Version P/G No.
All
Australia
All,
except
Australia
11
11 -1
11 -1
!
Current parts New parts
Parts code Parts code
SPAKA4849FCZZ SPAKA4683FCZZ AD
SPAKA4784FCZZ No change AW
SPAKA4786FCZZ SPAKA5010FCZZ AS
Price
rank
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others.
Parts name
Top packing
cushion
Original cover
cushion
Original cover
cushion
Effec-
tive
time
’93/5
Inter-
change-
ability
3 Q’ty: 4
1
3
Note
2/2
Loading...