SHARP SP1563 Technical Report

Date: Apr. 6, 1993

OPTION : SF-S14

No. : SP-1563

1. SUPPLY OF ROM CHIP AS SERVICE PARTS

2. CHANGE IN PACKING MATERIAL TO IMPROVE
WORK EFFICIENCY

1. Supply of ROM chip as service parts

1.General: The EPROM of the control PWB i s released as a s ervice parts.

2.Description: The EPROM is now available as a service parts under the following parts code.

The description in the S ervice Guide that the E PROM chip is not used on the
control PWB was wrong, which requires to corr ect the descr iption.
Parts name Parts codePrice rank
EP-ROM 00QDEV1021A//

Incorrect

P/G No. Parts code Description

1 -12

00Q1136980/// PWBA

W/O EPROM PWBA (Without EPROM)

Correct

1 -12 00Q1136980/// PWBA With EPROM (with EPROM)

3.Aciton: Servic parts.

2. Change in packing material to improve work efficiency

1.General: Change is made to the packing material owing to the following reason.

2.Reason: To improve the work effi ciency.

SHARP CORPORATION Reprography Division

1/3

Green

C

3.Description: Dimensions of the packing case are changed from the present 590 wide, 515
deep, 575 high to 573 wide, 521 deep, 510 high, with new internal c ushions
used.

Packing case

515 521mm

575
510mm

SF-S14

590
573mm

Current

Top pad

Bottom pad

Top pad

Bottom pad

New

2/3