Welcome to Skype™
With Skype on your TV, you can enjoy large screen video calls.
NOTE
•
It is free to create a Skype account and make Skype-to-Skype voice and video calls.
•
Skype is not a replacement for your telephone and can’t be used for emergency calls.
•
For detailed Skype information, please visit the following website:
http://www.skype.com/
•
Calling phones and mobiles, sending SMS (short message service) mail and saving
instant messages are not available.
•
You might not be able to enjoy Skype on your TV while using a specifi c function. In such
cases, please stop the specifi c function.
•
Depending on the Skype version being used by the contact you are calling, you may not
be able to perform some operations.
•
Skype, the Skype Logo and the S logo and other marks indicated on these instructions
are trademarks of Skype Limited or other related companies.
PREPARATION
To enjoy Skype, the following preparations are required.
•
Broadband Internet environment
•
Communication camera for Skype
•
TV software updated to a version that supports Skype
•
A registered Skype account or an E-mail address to create a new Skype account
Buy a communication camera
Follow the website guidance below and purchase a communication camera
compatible with Skype.
✶ Available from http://freetalk.me/product/sharp/
NOTE
•
The Skype FREETALK® communication camera is not supplied by Sharp.
•
Other cameras and webcams are not compatible with AQUOS TVs.
Update your TV
1 Press b or INPUT on the remote control to display the “INPUT” screen.
2 Confirm that there is a Skype selection on the “INPUT” screen.
If there is “Skype”: You do not need to update. Go to next page, “GETTING
STARTED”.
If there is no “Skype”: Follow the AQUOS world website guidance in step
3 and download the software update fi le to the USB
device.
✶ AQUOS world website:
http://www.aquos-world.com/index_en.html
3 Update your TV via USB.
Follow your TV operation manual and update the software.
NOTE
•
Depending on the network environment used, the speech/video quality may deteriorate.
1
GETTING STARTED
To start Skype, perform the following procedure:
1. Connect the communication camera
Connect the communication camera directly to USB 1 port on your TV.
NOTE
•
Depending on your TV, the USB port to be connected may differ.
For more details, see your TV operation manual.
•
Set up the communication camera on the upper left portion of the TV.
•
Do not use a USB hub.
2. Select Skype on the “INPUT” screen
1 Press b or INPUT on the remote control to display the “INPUT” screen.
2 Press a or b and select “Skype”.
3-1. Create a new Skype account
If you already have a Skype account, you can use that account and go to the next
step (3-2. Sign in to Skype).
If you do not have a Skype account:
1 Select “Don't have a Skype Name?” in the “Welcome to Skype” screen and
press OK or ENTER.
2 The “Create a new Skype account” screen will appear.
If you agree to all of the Terms and conditions, select “Accept” and press OK
or ENTER.
NOTE
•
For more information on the Terms and conditions, refer to the following:
-
Skype Terms of Service (http://www.skype.com/intl/en/legal/terms/tou)
-
Skype Privacy Statement (http://www.skype.com/legal/privacy/general)
3 Press OK or ENTER.
4 If you agree to the Terms of Use, select “Agree” and press OK or ENTER.
• The “Welcome to Skype” screen is displayed.
NOTE
•
The Terms of Use are displayed only when Skype is fi rst used.
•
If the “Welcome to Skype” screen is not displayed, please check the network connection.
3 Enter your Full Name, choose a Skype Name and Password, and enter your
E-mail address.
Cindy
4 Select “Create Account” and press OK or ENTER.
2