SJ-15N
EFR 250
REFRIGERATOR - FREEZER
OPERATION MANUAL
CONTENTS
•WARNING ............................................. 2
• CAUTION.............................................. 2
• INSTALLATION .................................... 3
• DESCRIPTION ..................................... 4
• OPERATION ......................................... 5
•STORING FOOD .................................. 6
• CARE AND CLEANING ....................... 7
•WHAT TO DO BEFORE YOU CALL
FOR SERVICE ...................................... 8
Thank you very much for buying this SHARP product.
Before using your SHARP refrigerator, please read this
operation manual to ensure that you gain the maximum
benefit from it.
1
WARNING
1. This refrigerator is airtight. TO PREVENT FA-
TAL ACCIDENTS TO CHILDREN, please completely remove the door prior to discarding the
refrigerator.
2. Highly volatile and inflammable materials such
as ether, petrol, propane gas, adhesive agents
and pure alcohol etc. are liable to explode. Do
not store these materials in the refrigerator.
3. To prevent damage to the outer cabinet, avoid
contact with lacquer, and paint, etc.
4. When cleaning your refrigerator, do not splash
water directly on the outer cabinet or the interior. This may lead to rusting and deterioration
of the electrical insulation.
5. When cleaning any areas adjacent to electrical components or replacing the lamp bulb,
unplug the refrigerator first to prevent electric
shock.
6. Should electrical components be accidentally
immersed in water, unplug the refrigerator, dry
the parts and contact your nearest service
agent approved by SHARP.
CAUTION
7. When disconnecting the power plug, do not
touch the pin of plug. This may cause electric
shock.
8. This refrigerator is designed solely for the purpose of storing foodstuff for domestic use in
accordance with the instructions given in this
manual. Using the refrigerator for other purposes might be harmful to persons or property.
9. This refrigerator is not suitable for the storage
of materials requiring precise temperatures.
Deterioration of these materials will be dangerous.
10. Dust deposited on the power plug may cause
fire. Wipe it off carefully.
11. Do not attempt to change or modify this refrigerator. This may result in fire, electric shock or
injury.
12. Information regarding disposal of the appliance
Flammable insulation blowing gases should be
disposed appropriately. Take the cabinet and
doors to a recycling plant for flammable insulation blowing gases.
1. Do not touch the compressor unit or its peripheral parts, as they become extremely hot
during operation and the metal edges may
cause injury.
2. If the power supply is accidentally disconnected, please wait for at least 6 minutes before re-connecting the power, as back pressure in the compressor may trip the overload
relay.
3. Avoid removing food from the freezer with your
bare hands. Directly touching products stored
at sub-zero temperatures can result in frostbite.
4. To prevent accidental power disconnection,
plug the refrigerator directly to the source. Do
not use a double adaptor as loss of power could
lead to the spoiling of the stored food.
5. Do not place bottles in the freezer as they may
crack when frozen.
6. Keep the door securely closed. If the door is
left ajar, the controlled inner temperature will
rise, resulting in food spoilage and increase in
electricity costs.
7. Do not install the refrigerator in a damp or wet
location as this may cause damage to the insulation and a leak. Condensation may also
build on the outer cabinet and cause rust.
8. When installing or moving the refrigerator,
make sure that you do not nip or kink the power
cord. Damage of the power cord may cause
electric shock or fire.
9. Do not use this refrigerator when the power
cord or plug is damaged, or the outlet attachment is loose, as they may cause electric shock
or fire.
10. Disconnect from the mains electricity supply
by removing the mains plug from the electricity supply socket. Do not remove by pulling the
mains lead. This may cause electric shock or
fire.
11. Make sure that you leave adequate ventilation
space around the refrigerator to prevent the
compressor from overheating and stopping.
Please follow the instructions given for installation.
2
12. The refrigeration system behind and inside the
refrigerator contains refrigerant. If this system
is punctured it could result in serious damage
to your refrigerator, therefore do not allow any
sharp objects to come into contact with the
refrigeration system.
13. Should the flexible supply cord be damaged,
it must be replaced by service agent approved
by SHARP as a special cord is required.
14. In case of gas leak, ventilate the area by opening a window, etc. Do not touch the refrigerator or the power outlet.
15. Do not place heavy or easily broken objects
on top of the refrigerator. Objects may fall when
opening or closing the refrigerator, causing
injury.
INSTALLATION
16. Do not place objects containing liquid on top of
the refrigerator. Spillage may cause electric
shock or fire.
17. Do not drop objects inside the refrigerator or
strike the inner wall. This may cause the inner
surface to crack.
18. This refrigerator is not intended for use by
young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the
refrigerator.
1. To ensure adequate ventilation for your refrigerator, it is recommended to provide space of
6cm on both sides and at the back, and space
of 9cm above the refrigerator. Insufficient spacing will decrease the cooling efficiency, resulting in unnecessary consumption of electricity.
2. Using the front Adjustable foot, ensure that the
refrigerator is positioned firmly and level on
the floor.
3. In order to prevent possible electric shock, install the grounding wire to the earth wire connecting screw at the rear of the refrigerator. (2
pin plug region)
NOTE:
• Position your refrigerator so that the plug is accessible.
• Keep your refrigerator out of direct sunlight.
• Do not place next to heat generating appliance.
• Do not place directly on the ground. Provide suitable stand.
Before using your refrigerator
Clean the inside parts with a cloth soaked in
warm water. If soapy water is used, wipe it off
thoroughly.
6cm
9cm
6cm
Adjustable foot
6cm
105 cm
89 cm
3
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
1. Freezer shelf
2. Ice cube tray
3. Ice cube box
4. Freezer temp. control knob
5. Refrigerator temp. control knob
6. Winter switch
7. Light
8. Refrigerator shelf (Large)
9. Refrigerator shelf (Small)
10. Evaporating pan (rear side)
13
14
15
16
17
18
19
11. Fruit and vegetable crisper
12. Adjustable foot
13. Table top
Do not place hot objects on Table top.
The table may melt and deform. The table
can resist temperatures up to 100°C.
14. Freezer pocket
15. Magnetic door seal
16. Free pocket
17. Egg holder
18. Light switch
19. Bottle pocket
4
OPERATION
MAX
(WINTER SEASON)
MEDMIN
FREEZER TEMP. CONTROL
MIN MAX
CONTROLLING TEMPERATURES
The refrigerator controls its temperature automatically. However, if needed, adjust the temperature as follows.
Freezer compartment
FREEZER TEMP. CONTROL
regulates the quantity of cold
air to the freezer.
FREEZER TEMP. CONTROL
(WINTER SEASON)
MEDMIN
MAX
• MAX setting directs more cold air to the freezer compartment. (making the freezer compartment colder)
• MIN setting directs less cold air to the freezer compartment.
(making the freezer compartment less colder)
• If the freezer does not cool even when setting FREEZER
TEMP. CONTROL to MAX, set REFRIGERATOR TEMP.
CONTROL to MAX as well.
Refrigerator compartment
REFRIGERATOR TEMP.
CONTROL controls the
compressor running time of
the refrigeration system.
MED
MIN MAX
REFRIGERATOR
TEMP. CONTROL
• MAX setting will result in colder temperature in the both
(refrigerator and freezer) compartments.
• MIN setting will result in warmer temperature in the both
(refrigerator and freezer) compartments.
• If the refrigerator is operated for a long time with REFRIGERATOR TEMP. CONTROL set at MAX, foods stored in
the refrigerator compartment may also freeze.
• Low ambient temperature may cause placed foods to freeze
even if REFRIGERATOR TEMP. CONTROL is set to MIN.
• The freezer compartment may not cool sufficiently when
leaving REFRIGERATOR TEMP. CONTROL as MIN for an
extensive period. To cool the freezer compartment properly, set REFRIGERATOR TEMP. CONTROL closer to MAX.
MAX
For making ice rapidly or
fast freezing.
MED
For normal freezing.
MIN
When frozen food or ice
cream is not stored.
MAX
For keeping foods fresher
tasting.
When the refrigerator does
not provide sufficient cooling.
MED
For normal operation.
MIN
When the refrigerator provides excessive cooling.
NOTE:
• For hot summer conditions (about over
35°C ambient temperature), set your
FREEZER TEMP. CONTROL to less
colder than MED towards MIN. This is
because MAX setting may result in too
little air flow to the refrigerator compartment, causing too warm temperature
in the refrigerator compartment.
And set your REFRIGERATOR TEMP.
CONTROL to colder than MED.
MIN MAX
MED
MIN MAX
REFRIGERATOR
TEMP. CONTROL
• Winter switch
Put Winter switch “ON” When ambient
temperature is below 10°C to avoid too
warm temperature in the freezer.
OFF
•With FREEZER TEMP. CONTROL set
to MAX, there will be less cold air directed to the refrigerator compartment,
and the refrigerator compartment may
not become cold enough.
ON
Push
5
HINTS WHEN MAKING ICE
1. Do not over fill the Ice cube tray; other-
wise the ice cubes will be joined together when frozen.
2. When the ice cubes are made, hold the
Ice cube tray upside down whilst twisting either end in opposite directions, allowing the ice cubes to drop out.
Water
level
Ice cube box
NOTE:
Ice cube tray
Do not make ice with the Ice cube box or
pour oil into it. The Ice cube box may crack.
DEFROSTING
Defrosting is fully automatic due to a unique energy saving system. Whereby the defrost cycle start time
is proportional to the running time of your refrigerator compressor, i. e., the less time the refrigerator
compressor operates (during the winter season or you’re away on holidays), the longer the time between
each defrost cycle.
DEODORIZING UNIT
A built-in unit which requires no manual operation because it automatically starts operating when the refrigerator is powered on.
STORING FOOD
Refrigeration reduces the rate of food spoilage.
To maximize the shelf life of perishable food products, ensure that the food is of the freshest possible quality. The following is a general guide to
help promote longer food storage.
Fruit / Vegetables
To minimize moisture loss, fruit and vegetables
should be loosely enclosed in a plastic material
e.g. wrap, bags (do not seal) and place in the
Fruit and vegetable crisper. Those fruits and vegetables with thick skins e.g. oranges do not require wrapping.
Dairy Products & Eggs
• Most dairy products have a use by date on the
outer packaging which informs the recommended temperature and shelf life of the product.
• Eggs should be stored in the Egg holder.
NOTE:
• Evenly place the food on the shelves to allow the
cooling air to circulate efficiently.
• Hot foods should be cooled before storing. Storing hot foods increases the temperature in the unit
and increases the risk of food spoilage.
• Do not block the outlet and inlet of the cool air
circulating circuit with foods or containers; otherwise the foods will not be evenly cooled throughout the refrigerator.
Do not place
food directly in
front of cold air
outlet. This may
lead to the food
freezing.
IN
OUT
Meats / Fish / Poultry
• Place on a plate or dish and cover with paper
or plastic wrap.
• For larger cuts of meat, fish, or poultry, place
to the rear of the shelves.
• Ensure all cooked food is wrapped securely
or placed in an airtight container.
6
FOR BEST FREEZING
• Quality of foods should be fresh.
• Freeze small quantities of food at a time to freeze
them quickly.
• Food should be properly stored or covered and
the air should be removed to seal tightly.
• Evenly place the food in the freezer.
• Label bags or containers to keep an inventory of
freezing food.
CARE AND CLEANING
Some household cleaning chemicals may
affect the inside surfaces and plastic
shelves resulting in splitting or cracks occurring.
When cleaning all plastic parts inside this refrigerator, only use diluted
dishwashing liquid(soapy
water). Make sure that all
plastic parts are thoroughly rinsed with water
after cleaning.
1. Remove the shelves and pockets from the
cabinet and door. Wash them in warm soapy
dishwashing water; rinse in clean water and
dry.
2. Clean the inside with a cloth soaked in warm
soapy dishwashing water. Then, use cold water to wipe off soapy water.
3. Wipe the exterior with a soft cloth each time it
is soiled.
4. Clean Magnetic door seal with a toothbrush
and warm soapy dishwashing water.
5. Whenever the refrigerator is moved to clean
or repositioned, the Evaporating pan should
be removed and cleaned.
Evaporating pan;
How to remove
Move the Evaporating
pan to pull it toward
yourself.
How to set
1. Make sure the
back end of the
Evaporating pan
rests securely on
the claw. Otherwise water will
leak.
2. Set the Evaporating pan so that
the two protrusions come
through its corresponding holes.
Evaporating
pan
Holes
Claw
Protrusion
Evaporating
pan
Holes
NOTE:
• Do not use polishing powder, benzine, hot water
etc.
• If undiluted detergent is used or soapy water is
not wiped off thoroughly, cracking of plastic parts
can result.
• Wipe any food oils adhered to plastic components
as they can cause cracking of the plastic surface.
Replacing method of the lamp bulb
1. Unplug the refrigerator first to
prevent electric shock.
2. Replace the lamp bulb with
the same type.
base E14, MAX 10W, T-20
Switching off your refrigerator
If you switch your refrigerator off when you are
going away for an extended period, remove all
food, clean the interior thoroughly. Remove the
power cord plug from the power socket and leave
all doors open.
7
WHAT TO DO BEFORE YOU CALL FOR SERVICE
Before you call for service, check the following
point.
IT IS NORMAL for the refrigerator to produce the
following sounds.
• Loud noise produced by the compressor when
operation starts --- Sound becomes quieter after a while.
• Loud noise produced once a day by the compressor --- Operating sound produced immediately after automatic defrost operation.
• Sound of flowing fluid (gurgling sound, fizzing
sound) --- Sound of refrrigerant flowing in pipes
(sound may become louder from time to time).
• Cracking or crunching sound --- Sound produced
by expansion and contraction of inner walls and
internal parts during cooling.
• Squeaking sound --- Sound produced by expansion and contraction of internal parts.
IT IS NORMAL that the outside of a cabinet may
be hot when touched. The hot pipe is in the cabinet in order to prevent dew generation.
IF YOU STILL REQUIRE SERVICE
Refer to your nearest service agent approved by
SHARP.
SHARP CORPORATION
OSAKA, JAPAN
8
Printed in China
TINS-A894CBRZ 04MK
CN
1
Loading...