COPIER : SF-2040 etc.
No. : S-248
ACTION TO ACCOMODATE THE CHINESE PAPER SIZE (K
SIZE).
1.Model Name: SF-1025/2030/2040 (For machines bound for the Chinese market)
2.General: A change has been carried out in the side plate of the models listed above.
The new side plate can be used with the Chinese paper size (K size).
Indication line label
TLABZ3020FCZZ
Side plate F CHN
LPLTM5481FCZZ
Note:
When carrying out the action described above on machines produced before the 1997
December production lot to enable them to handle the Chinese paper size (K size), it is
necessary to replace the tray drawer case (Please refer to Technical Report No.
SP-2284 for details concerning this change.) in addition to the change carried out in the
side plates, described above.
3.Action: From the 1st lot of 1998 January production.
Side plate R CHN
LPLTM5482FCZZ
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
SF-1025
SF-2040
SF-2030 30 -9
SF-1025
SF-2040
SF-2030
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
29 -9
China
29 -11
30 -11
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
LPLTM4039FCZZ LPLTM5481FCZZ AL Side plate F CHN
LPLTM4040FC01 LPLTM5482FCZZ AN Side plate R CHN
Price
rank
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
Effec-
tive
time
1st lot
'98/1
Inter-
change-
ability
4
Note
2/2