SHARP S235 Technical Report
COPIER : SF-1116
Date
:
Jun. 22, 1998
1.DISCONTINUANCE OF THE PRESSURE RELEASE WIRE IN THE FUSING UNIT
CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
2.DISCONTINUANCE OF THE SCREWS IN THE PAPER FEEDING UNIT CARRIED
OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
No. : S-235
1. Discontinuance of the pressure release wire in the fusing unit carried out as a
measure to improve productivity.
1.Model Name: SF-1116 (only for machines bound for China)
2.General: The fusing wire has been attached so that the fusing pressure release is carried out at
the same time as when the frame is opened. A change has been carried out in the shape
of the connector cover, however, and it is now possible for the new part to carry out the
same function as the pressure release wire. In accordance with this change the fusing
wire has been discontinued.
New (Discontinued) Old (This portion functions to replace the fusing wire)
3.Action: Running change from 1998 mid-April production.
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Discontinuance of the screws in the paper feeding unit carried out as a measure to
improve productivity.
1.Model Name: SF-1116 (only for machines bound for China)
2.General: A screw in the paper feeding unit has been discontinued in one location. This action has
been carried out as a measure to improve productivity.
(Please refer to the figure shown below for details concerning the discontinued screw.)
3.Action: From the 1st lot of 1998 April production.
Ref.
Model name P/G No.
No.
1
SF-1116
2 17 -9 XEPSD40P10000
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
16 -30 PWIR-0716FCZZ Discontinued
Current parts New parts
Parts code Parts code
Only 1 location
Discontinued
Discontinued
Price
rank
----
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
Fusing wire ∗
Screw (M4 × 10)
Effec-
tive
time
1st lot
'98/4
Inter-
change-
ability
6
Note
2/2
∗ Running change from 1998 mid-April production.
Loading...