SHARP S229 Technical Report

COPIER : SF-2052

Date

May. 15, 1998

No. : S-229

ESTABLISHMENT OF NEW PARTS CARRIED OUT IN ACCORDANCE WITH A CHANGE CARRIED OUT IN THE SPECIFICATIONS.

1.Model Name: SF-2052 (for machines bound for the Taiwan market)

2.General: The parts described below have been newly established. This action has been carried

out in accordance with a change that was carried out in the specifications of the models listed above (the 3-tray design has been changed to a 4-tray design).

<P/G No.> <Part name> <Part code> 12 -27 Lower unit main harness (Taiwan) DHAI-2931FCZZ 7 -43, 13 -38 Main harness R (Taiwan) DHAI-2939FCZZ

3.Action: From the start of mass production.

Ref.

Model

No.

SF-2052 Taiwan

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

12 -27

7 -43

13 -38

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

----

Price

DHAI-2931FCZZ BK

DHAI-2939FCZZ BP Main harness R

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

Lower unit main harness

Effec-

Inter-

tive

change-

time

ability

1st lot 6

Note

SHARP CORPORATION Reprography Division

Green