SHARP S226 Technical Report

DUPLICATOR : SD-2260/3062

Date

May. 15, 1998

No. : S-226

MEASURE TO COMPLY WITH NOISE STANDARDS IN MACHINES BOUND FOR THE SOUTH AFRICAN MARKET.

1.Model Name: SD-2260 ∗ (for machines bound for the South Africa, India, Greece, Lebanon,

Iran, Iraq, Nigeria, Turkey, Algeria, West Africa markets.) SD-3062 ∗ (for machines bound for the South Africa, India markets.)

2.General: Changes have been carried out in the following parts. This action has been carried out

as a measure to comply with noise standards in South Africa.

3.Action: From the start of 1997 October production.

Ref.

Model

No.

name

SD-2260

SD-3062

SD-2260

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

9 -60

53 -901

∗

Algeria

West Africa

9 -70 2 -22

42 -37 ---- RCORF0012FCZZ AH Core 6

57 -901

59 -901

60 -901

2 -21

Current parts New parts

Parts code Parts code

CPWBN1199FC55 CPWBN1236FC55 CK Main PWB (CE)

QCNW-0147FCZZ

----

PCUSG0277FCZZ (Discontinued) ---- FIN fixing cushion

DHAI-2173FCZZ DHAI-2173FC11 BC Upper OP unit harness 3

DUNT-6641FC13 DUNT-6641FC14 ES RDH unit 3

CPWBN1200FC54 CPWBN1224FC55 BZ

RCORF1016LCZZ RCORF6657RCZZ AP

Effec-

Price

rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

F/G mesh wire

Ferrite core

Operation control PWB (French)

tive

time

1st lot '97/10

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green