SHARP S221 Technical Report

COPIER : SF-1025/2030
Date
:
Jan. 26, 1998
1.CHANGE CARRIED OUT IN THE SHAPE OF THE LOUVER OF THE REAR EXTERIOR.
2.CHANGE CARRIED OUT IN OPTICAL UNIT.
1. Change carried out in the shape of the louver of the rear exterior.
1.Model Name: SF-1025 (For machines bound for the Chinese market).
2.General: A change has been carried out in the shape of the louver of the rear exterior. This action
has been carried out as a measure to comply with GB standards.
No. : S-221
3.Action: From the 1st lot of 1997 December production.
<Old> <New>
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Change carried out in optical unit.
1.Model Name: SF-2030 (For machines bound for the Chinese market).
2.General: A change in the optical unit has been carried out. The optical unit has been changed to
the one used in model SF-2040. This action has been carried out as a measure to comply with GB standards. In accordance with this change, the service parts used in the optical unit in machines produced after 1997 December production lots should be those described in the parts guide for model SF-2040.
3.Action: From the 1st lot of 1997 December production.
Ref.
Model
No.
1 SF-1025 Chinese
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
1 -8
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
GCAB-0754FCZ2 GCAB-0754FCZ3 AZ Rear exterior
Price
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
Parts name
rank
Effec-
tive
time
1st lot ’97/12
Inter-
change-
ability
3
Note
2/2
Loading...