SHARP S213 Technical Report

COPIER : SF-2116/1016

Date

Oct. 2, 1997

No. : S-213

CHANGE IN THE FIXING SCREWS OF THE GROUNDING WIRE CARRIED OUT AS A MEASURE TO IMPROVE OPERATIONABILITY.

1.Model Name: SF-2116/1016 (Only those machines bound for the Taiwanese market)

2.General: The addition of a grounding wire and a grounding shaft had been carried out to the base

plate section as a measure to comply with noise standards. A change in the fixing screws of the grounding wire, however, has now been carried out as a measure to improve operationability.

Old: M4 × 8

↓

New: M4 × 10

Grounding shaft

3.Action: From the 1st lot of 1997 March production.

Ref.

Model

No.

SF-2116 SF-1016

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

Taiwan

Current parts New parts

Parts code Parts code

XBPSD40P08KS0 XBPSD40P10KS0 AA Screw (M4 × 10)

Grounding wire

M4 × 10

Price

rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Grounding wire

Parts name

Effec-

tive

time

1st lot

’97/3

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green