SHARP S168 Technical Report

Date: Nov. 24, 1995

COPIER: SF-2022,SF-D20

No. : S-168

MEAS URES CARRIED OUT TO COMPLY WI TH CE
MARK STANDARDS.

1.Model name: SF-2022/2027 (only for models bound for UK, SEEG).
SF-1025 (only for models bound for SEEG).
SF-D20/D21 (only for models bound for UK, SEEG).

2.General: The new noise standards (CE Mark) in Europe will go into effect as of January, 1996. In
accordance with the establishment of these new standards, the measures described
below have been carried out.

3.Description: SF-2022/2027/1025.

(1) A ferrite core has bee added to the harness of the operation section.

(2) A CE Mark label has been attached to the upper right-hand corner of the rear cabinet

of the machine, and to the shipping boxes.
(The CE Mark label is a standards compliance label, and as a result it is not offered as
a service part.)

Main harness of the operations section.
DHAI-2036FCZZ.

Gray harness.

Convex.

Ferrite core.
RCORF0022FCZZ

SHARP CORPORATION Reprography Division

1/3

Green

C

(3) A CE Mark compliance leaflet has been included in the plastic bag of the operator ’s

manual when the machine is shipped.

SF-D20/D21.

(4) Mesh tape has been wound around the main harness.

Main harness LCC (DHAI-2033FCZZ):D21.
Main Harness 2 cassette (DHAI-2032FCZZ):D20.

Control PWB

Shaded area is wrapped
by mesh tape.

Transport motor.

(5) A CE Mark label has been attached to the rear desk cabinet, and to the shipping

boxes.

4.Action: SF-2022/2027 → From 1995 mid-July production.
SF-1025 → From the start of 1995 August production.
SF-D20/D21 → From the start of 1995 July production.

Contact between the
mesh ware and the metal

2/3