SHARP S166 Technical Report

Date: Oct. 19, 1995

DUPLICATOR : SD-2060

No. : S-166

COMPLIANCE WITH THE CE-MARK.

1.Model name: SD-2060/3062 (only for machines bound for the UK or SEEG).

2.General: The following changes have been carried out in compliance with the CE-mark:

(1) The FIN fixing cushion (P/G ) has been changed to a gasket. (2) A ferrite core has been added to the harness described below.

9 -70

Plastic clamp.

Screw

Frame.

Operation panel unit (CPNLC0212FC**)

Added ferrite core. RCORF6657RCZZ.

Optical plate unit

Wire saddle

Chassis unit.

Screw

Stapler sub harness.

Machine harness. Rear main harness R. DHAI-2331FCZZ (Japan). DHAI-2331FC11 (EX).

High voltage PWB.

Finisher main harness.

Added ferrite core. RCORF 1016LCZZ .

Snap band.

White.

Mirror motor cover plate.

Finisher control PWB.

Connector. CN901

Drum motor

Green.

Electrode holder.

Blue.

Chassis.

Ferrite Core. RCORF1016LCZZ.

SHARP CORPORATION Reprography Division

Ground wire

Rear main harness L. (DHAI-2138FCZZ).

Multi drive unit.

1/2

Green

(3) The shape of the TC socket electrode has been changed.

TC Socket electrode

The shaded area has been cut away

(4) Ferrite screws have been added to the DC power supply PWB.

Temporary measure added to the rear side of the PWB. (from the start of 1995 July production). Permanent measure A change has been carried out in the PWB pattern and added to the surface of the board. (The parts code for the PWB has also been changed.) (from 1995 mid-September production).

(5) CE-Mark labels have been attached to the upper right cabinets and the packing

cases.

Note: In reference to the actions described above, the use of new type parts with machines prior to the carrying out of measures for CE-mark compliance does not pose any problems, but the old type parts should not be used with machines which have been changed to comply with the CE-mark.

3.Action: From the start of 1995 July production.

Ref.

Model

No.

(1)

(2)

SD-2060 SD-3062

(3)

(4)

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

spec i fi e d on es fo r m ai n ta in i ng t he s a fe ty and per fo r ma nce of the set.

name

Version P/G No.

9 -70

U.K.

SEEG

28 -41 QSLP-0162FCZ1 QSLP-0162FCZ2 AF

8-1

85 -901

Current parts New parts

Parts code Parts code

PCUSG0277FCZZ PGSK-0009FCZZ AV Surigale gasket

—

CPWBN1010FC31 CPWBN1010FC32 CH

Price

rank

RCORF6657RCZZ AP RCORF1016LCZZ AL

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others .

Parts name

Ferrite core

TC socket electrode

DC power supply PWB

Effec-

tive

time

1st lot

’95/7

Mid-

’95/9

Inter-

change-

ability

Note

2/2