SHARP S160 Technical Report

Date: Sep. 6, 1995

DUPLICATOR : SD-2060

No. : S-160

CONFORMING TO THE CE-MARK.

1.Model name: SD-2060/3062 (only for machines bound for the UK and SEEG).

2.General: The changes described below have been carried out in machines bound for the

European destinations in conformity with the European EMC standards (CE-mark).

3.Description: (1) F/G mesh wire has been added to the suction fan unit (Fig.-1).

(2) A ferrite core has been added to the AC cord (Fig.-2) (only for machines bound for

the UK).

(3) Changes in the parts codes have been carried out in accordance with the addition of

a ferrite core to the upper OP unit harness in the operations panel unit.

(Fig.-1).

F/G mesh wire.

(Fig.-2).

Cleaner drive plate.

A ferrite core has been added to the section marked "A" in the figure above (oniy for machines bound for the UK).

Snap band (fixed to the AC power supply bed plate).

AC cord retainer.

AC cord.

Ferrite core

4.Action: From the start of 1995 July production.

SHARP CORPORATION Reprography Division

AC code

1/2

Green

Ref.

Model

No.

(1)

SD-2060

(2) U.K.

SD-3062

(3)

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specifie d on es fo r m ai n ta in i ng t he s a fe ty an d pe rf o rma nc e o f th e s et .

name

Version P/G No.

U.K.

SEEG

U.K.

SEEG

42 -37 RCORF0012FCZZ AH Core

2 -23

Current parts New parts

Parts code Parts code

QCNW-0147FCZZ AL F/G mesh wire

—

DHAI-2173FCZZ DHAI-2173FC11 BC

Price

rank

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others .

Parts name

Upper OP unit harness

Effec-

tive

time

1st lot

’95/7

Inter-

change-

ability

Note

2/2