SHARP S159 Technical Report

Date: Dec. 29, 1995

COPIER : SF-2116

No. : S-159

PREVENTING THE CONTACT PORTION OF THE CONNECTOR FROM BREAKING.

1.Model Name: SF-2116/2118 (UK version only)

2.General: In impact resistance tests of sample units made before mass production, it was noted

that the optical units rear frame ADF connector contact face has a tendency to break. Therefore, the following changes have been made.

3.Description: It was originally planned to make the lattice frame cover out of resin, but from the first unit of mass production on, the part will be made of metal in order to increase its resistance to damage.

As a result of the above change, the part code listed in the part guide has changed.

Please correct it.

4.Action: From the first mass-produced unit on.

Ref.

Model

No.

SF-2116 SF-2118

1. Interc ha ng ea bl e. 4. Not int erc h an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

sp ec i fi e d on es fo r m ai n ta in i ng t he s a fe ty and perfo r ma nc e o f th e s et .

name

Version P/G No.

U.K

6 -27

only

Current parts New parts

Parts code Parts code

PFTA-0110FCZZ LPLTM5029FCZZ AG

Price

rank

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Parts name

Connector protect plate

Effec-

Inter-

tive

change-

time

ability

1 st lot —

Note

Note: Correction to the part guide only

SHARP CORPORATION Reprography Division

Green

2/2