SHARP S137 Technical Report

Date: Dec. 3, 1993

DUPLICATOR : SD-2060

[Service information]

No. : S-137

PARTS GUIDE CORRECTION

(U.K. ONLY)

1.General: Corrections should be made in the parts guide in accordance with the parts additions

listed below, effective in U.K. as of the start of mass production.

2.Description: Molts and spacers have been added to the front and rear paper output plates, and the center tray units bound for U.K. have been redesigned.

Rear paper output plate.

Paper output plate spacer B (PSPAZ0632FCZZ).

Center paper tray unit.

DUNT-6621FC50 → DUNT-6621FC52

3.Effective time: (Factory action)

From the start of mass production.

Paper output plate molt.

Front paper output plate.

Molts and spacers added to the back side of the front and rear paper output plates.

Paper output plate molt (PMLT-0929FCZZ).

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

SD-2060 U.K.

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

sp ec i fi e d on es fo r m ai n ta in i ng t he s a fe ty and pe rformance o f th e s et .

name

Version P/G No.

29 — PSPAZ0632FCZZ AH

29 — PMLT-0929FCZZ AB

30 -901 DUNT-6621FC50 DUNT-6621FC52 CY

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of

6. Others.

Price

relate d parts in use .

Parts name

rank

Paper output plate spacer B

Paper output plate molt.

Center paper tray unit BK.

Effec-

tive

time

1st lot.

Inter-

change-

ability

— Q’ty: 2

Note

2/2