SHARP S131 Technical Report

Date: Apr. 7, 1994

COPIER : SF-7320

No. : S-131

[PARTS CHANGE INFORMATION]

SEEG ONLY

1. SUPPLY OF THE POWER SUP PLY PWB FROM ANOTHER VENDOR

2. REVISION OF THE INST RUCTION MA NUAL (DESCRIPTI ON IN FIVE LANGU AG ES PROVIDED IN ONE BOOK)

1. Supply of the power supply PWB from another vendor

1.General: Because of the following reason, the power supply PWB of the SMF production SF-7320 and SF-7370 is now obtained from another vendor. Present power supply PWBs will be provided as service parts.

2.Reason: Due to parts supply situation.

3.Description: With this change, change is also made to the power supply PWB holding bracket.

NOTE: For the new type power supply PWB cannot be ins t alled on the present

power supply PWB holding bracket, it would be necessary to replace the bracket with the new type as well.

The following described about compatibility of the power supply PWB and its bracket regarding the present and new types.

Current power supply PWB New power supply PWB

Current power supply PWB holding bracket

New power supply PWB holding bracket

O: Can be installed, X : Cannot be installed

* Present power supply PWBs will be provided as service parts. If defects are found on

units with new power supply PWBs on the market,. Please replace the power supply PWBs.

4.Action: (Factory action)

Power supply PWB holding bracket: Since October 1992. Power supply PWB: Since April 1992.

SHARP CORPORATION Reprography Division

1/2

Green

2. Revision of the instruction manual (description in five languages provided in one book)

1.General: The SEEG version instruction book is revised for productivity enhancement.

2.Reason: For productivity enhancement.

3.Description: 1. Five linguistic versions of instructions are provided in one book (SF-7320, SF-7370).

2. The size of the book is changed from A4 to A5 (SF-7320 only).

4.Action: (Factory action) SF-7320 : Since March 1992. SF-7370 : Since July 1992.

2/2