Sharp PC-UM32W User Manual

Download

Page 1

Supplement for PC-UM32W

• Specifications

• Re-installation Instructions

Specifications

Parts Specifications

CPU Low Voltage Mobile IntelPentium III processor featuring

Primary cache 32KB (Integrated with CPU) Secondary cache 512KB (Integrated with CPU) ROM Including system BIOS,VGA BIOS, Plug&play compliant BIOS RAM System SDRAM 256MB, expandable up to 512MB Video Max.48MB (shared with system memory) Display

Keyboard IBM compatible keyboard Pointing device Glide pad (touch-sensitive control pad with 2 buttons ) Drive Hard disk Approx. 40GB (C: Approx. 30GB, D: Approx. 10GB), IDE

PC card slot Type II × 1 (PCMCIA 2.1 compliant) CardBus compliant CF card slot Type II × 1 Audio system monaural speaker, sound system compliant with AC97 audio I/O ports Audio Audio output jack (stereo), external microphone jack (monaural) Others 2 USB ports (USB2.0 compliant), IEEE 1394 connector,

Modem Data: 56Kbps (receive), 33.6Kbps (send), Fax: 14.4Kbps LAN 100 BASE-TX/10 BASE-T LAN Wireless LAN

Operating system* Power AC adapter 100-240V, 50-60 Hz Battery Rechargeable lithium ion battery Battery life*

Battery charging time

Panel Active Matrix (TFT) color LCD 12.1”(30.7cm) Video controller Integrated with chipset Resolution/color 1024 x 768 dots/16M colors by dithering function

Floppy disk (option/external) CD-ROM (external) USB interface, 6 x Speed

*Charging time varies depending on usage

enhanced Intel® SpeedStep® Technology at 1GHz/533MHz -M

interface USB interface 3.5", 1.44MB/720KB

expansion port for Parallel/VGA converter cable

Radio Technology DSSS(IEEE802.11b) compliant Frequency Band 2400-2483.5MHz Operating Channels 11 channels Data Rate 1 / 2 / 5.5 / 11 Mbps Microsoft® Windows® XP Professional Service Pack 1

Approximately 2.4 hours (standard battery pack only) Approximately 7.2 hours (high capacity battery pack (CE-BL18) only) *Battery life varies depending on usage *The standard battery pack and the high capacity battery pack cannot be used simultaneously Standard battery pack Turned off/hibernation: about 2.5 hours

Turned on: charging time may vary depending on the usage

Page 2

Battery charging time

Dimensions *No protrusion is included. Weights About 3.07 lbs (1.39 kg)

environment

∗1 This model (PC-UM32W) does not support other operating systems than the pre-installed one. ∗2 Battery life is based on BAPCo® MobileMark™ 2002. Battery life will vary based on many

factors including screen brightness, applications, features, battery conditioning, power management and other customer preferences.

*Charging time varies depending on usage

Temperature 50°F to 95°F (10°C to 35°C) Operating Humidity 20% to 80% (non-condensation)

High capacity battery pack

11.3" wide x 9.13" deep x 0.77" high (286mm x 232mm x 19.6mm)

Turned off/hibernation: about 3.5 hours Turned on: charging time may vary depending on the usage

Re-installation Instructions

To recover your hard disk, you will use PowerQuest®EasyRestore™. Before starting re-

installation, read the following End User License Agreement first.

PowerQuest(R) EasyRestore (TM) End User License Agreement

IMPORTANT: Read this before using your copy of PowerQuest software.

This document is a legal agreement between you, the "end user," and PowerQuest Corporation. Use of the

software indicates your acceptance of these terms. As used in this License Agreement, the term "Software"

means the EasyRestore software included on the CD provided with this License Agreement.

1. PROPRIETARY RIGHTS. The Software is a proprietary product of PowerQuest Corporation

("PowerQuest") or its licensors and is protected under U.S. copyright laws and international treaty

provisions. Ownership of the Software and all copies, modifications, and merged portions thereof shall at

all times remain with PowerQuest or its licensors.

2. GRANT OF LICENSE. The Software is being licensed to you, which means you have the right to use the

Software only in accordance with this License Agreement. The Software contains pre-installed software for

disaster recovery purposes. The Software is only authorized for distribution together with a specific

computer. This License authorizes you to use the Software for disaster recovery purposes only, to restore

the hard disk image contained on the CD to the computer with which the CD and Software were originally

shipped.

3. NONPERMITTED USES. Without the express permission of PowerQuest, you may not (a) use, copy,

modify, alter, or transfer, electronically or otherwise, the Software or documentation except as expressly

Page 3

permitted in this License Agreement, or (b) translate, reverse program, disassemble, decompile, or

otherwise reverse engineer the Software.

4. TECHNICAL SUPPORT. PowerQuest is NOT responsible to provide technical support. Any and all

technical support questions, regarding the Software, should be referred to the place of purchase.

5. U.S. GOVERNMENT RESTRICTED RIGHTS. If you are acquiring the Software on behalf of any unit

or agency of the United States Government, the following provision applies: It is acknowledged that the

Software and the documentation were developed at private expense and that no part is in the public domain

and that the Software and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or

disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in

Technical Data and Computer Software clause at DFARS 252.227-7013or subparagraphs (c)(1) and (2) of

the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable.

Contractor/manufacturer is PowerQuest Corporation/P.O. Box 1911/Orem, UT 84059.

6. NO WARRANTY. The Software is being provided to you AS IS. PowerQuest does not warrant the

Software to end users. If the Software fails to perform substantially in accordance with the documentation

provided to your hardware supplier, PowerQuest will repair or replace the copy of the Software provided to

your hardware supplier and will authorize your hardware supplier to provide such repaired or replaced Software to you without charge.

7. LIMITATION OF LIABILITY. NEITHER POWERQUEST NOR ITS SUPPLIERS SHALL IN ANY

EVENT BE LIABLE FOR ANY DAMAGES WHATSOEVER ARISING OUT OF OR RELATED TO

THE USE OF OR INABILITY TO USE THE SOFTWARE, INCLUDING BUT NOT LIMITED TO

DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, AND

DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS

INFORMATION, OR OTHER PECUNIARY LOSS, EVEN IF POWERQUEST CORPORATION HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER SUCH LIABILITY IS

BASED ON CONTRACT, TORT, WARRANTY, OR ANY OTHER LEGAL OR EQUITABLE

GROUNDS. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION

MAY NOT APPLY TO YOU.

8. NO WAIVER. Any failure by either party to this agreement to enforce a specific part of the agreement in

a specific situation is not a waiver of rights under the agreement. The party may still enforce the rest of the

agreement in that situation and may still enforce some or all of the agreement in other situations.

9. This License Agreement constitutes the entire agreement between you and PowerQuest pertaining to its

subject matter. This License Agreement is governed by the laws of the State of Utah. Any litigation arising

from this license will be pursued only in the state or federal courts located in the State of Utah.

Page 4

5,930,831; other patents pending in the U.S.A. and elsewhere. PowerQuest is a registered trademark and EasyRestore is a trademark of PowerQuest Corporation.

Preparation For Re-installation

You can format the hard disk and re-install the preinstalled software with the recovery CD-ROMs, and set the status of your computer to the same configuration as you used for the first time. The following items are necessary for re-installation:

• External CD-ROM drive unit (CE-CD05)

• Product Recovery CD-ROM disks

• Supplement for PC-UM32W

• Operation Manual

• It takes about 50 minutes to complete the re-installation. The time

depends on the operating system you are installing.

• It takes about ten seconds for the system to recognize a CD-ROM. If you operate too quickly, an error message may appear. In this case, return to the first step and repeat the installation.

• Use the Product Recovery CD-ROMs only for your computer.

• The Product Recovery CD-ROMs are not for sale. Keep them in a

secure place.

Backing Up the Data

Before formatting the hard disk, you should back up your data. For details on how to back up your data, see the Windows online help.

Selecting the Way To Recover Your System

Your computer has two drives (C: and D:) when it was shipped from the factory. You can select the way to recover your system.

• Recovers C: drive only. (Recommended)

This process will format C: drive only and recover C: drive to the same status as shipped from the factory. Nothing will be performed to D: drive. The volume of the drives will not be changed and will keep current one.

• Recovers both C: and D: drive.

This process will format both C: and D: drives, and contents of the hard disk will

be restored to its original state in C: drive. The volume of the drives will be back to the same as you used for the first time.

Page 5

• Formats hard disk and creates new partition.

This process will format whole hard disk drive and create new partition. You can select the volume of C: and D: drives. The contents of the hard disk will be restored to its original state in C: drive.

Formatting the Drives And Re-installing Windows

1. Make sure the computer is turned off.

2. If any peripheral devices are connected to your computer, disconnect them except the external CD-ROM drive unit (CE-CD05).

3. Connect the AC adapter; then, turn on the computer.

Be sure to connect the AC adapter. If the battery is completely discharged, the installation process will be canceled.

4. When the message Press <F2> to enter SETUP appears, press F2. The Setup Utility opens.

5. Insert the Product Recovery CD-ROM disk 1 into the CD-ROM drive.

6. In the Exit menu, select Load Setup Defaults; then, press Enter twice.

7. In Boot Sequence of the Boot menu, set CD-ROM Drive to the top of the list; then, press ESC.

8. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter twice.

9. Read the message on the screen, and select the way to recover your system; then, press Enter. If you selected Formats hard disk and creates new partition, go to the next step. Otherwise, go to Step 11.

10. Select the volume of C: drive and press Enter.

11. Read the message and select Continue; then, press Enter.

Although the pointer may be shown on the screen, never touch the keyboard or the mouse during recovery except when the message prompts you to. If you touch them, the re-installation will be canceled.

12. If you see the message asking you to insert the Product Recovery CD-ROM disk 2, remove the disk 1 and insert the disk 2; then, press Enter.

Page 6

13. If you see the message The hard disk has been recovered successfully, remove the Product Recovery CD-ROM disk 2. The system will restart automatically.

14. When the message Press <F2> to enter SETUP appears, press F2. The Setup Utility opens.

15. In the Exit menu, select Load Setup Defaults; then, press Enter twice.

16. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter twice. The system restarts.

17. Set up Windows, following the instructions on the screen. When you finish the setup, the recovery is completed. Make sure to set date and time.

TINSE3476ACZZ