Sharp PC-UM30W User Manual

Errata

On page A-2

2. Open the display cover and set the provided memory
upgrade tool with the projected part pointed to the left as
shown below; then, gently insert the tool straight into the
small hole of the glide pad. (Never insert anything but the
provided memory upgrade tool.)

Projected Part

Errata

On page A-2

2. Open the display cover and set the provided memory
upgrade tool with the projected part pointed to the left as
shown below; then, gently insert the tool straight into the
small hole of the glide pad. (Never insert anything but the
provided memory upgrade tool.)

Projected Part

3. Push down the tool into the hole, slide it completely to the
left and lift it up. The glide pad is slightly opened.

Go to the other side

UM30WU-2 UM30WU-2

3. Push down the tool into the hole, slide it completely to the
left and lift it up. The glide pad is slightly opened.

Go to the other side

4. Hold the tool with its projected part hooked on the glide pad
and gently open the pad.

4. Hold the tool with its projected part hooked on the glide pad
and gently open the pad.

On page A-10

Wrong

7. In Boot Sequence of the Main menu

Correct

7. In Boot Sequence of the Boot menu

On page A-10

Wrong

,

7. In Boot Sequence of the Main menu

,

Correct

,

7. In Boot Sequence of the Boot menu

,

UM30WU-2 UM30WU-2