Page 1
Getting Started With Your
SHARP PERSONAL COMPUTER
THANK YOU FOR PURCHASING THE SHARP PERSONAL COMPUTER. WE HOPE YOU
WILL ENJOY COMFORTABLE COMPUTING, BUT BEFORE STARTING TO USE YOUR
COMPUTER, PLEASE FOLLOW THE INSTRUCTIONS BELOW.
Open the carton box and check that the following items are included:
1
AC Power Cord AC Adapter Battery Pack Modem Cable
Cores for IEEE 1394 Cable
and LAN Cable
* Carefully inspect each component to make sure nothing is missing or damaged. If any of these
items is missing or damaged, notify your dealer immediately. Be sure to save the shipping
materials and carton in case you need to ship or store the computer in the future.
* Attach the cores to each of your LAN cable and IEEE1394 cable to insure compliance with
requirements of EMC regulations for computing equipment.
* Some other brochures or supplements may also be contained.
Recovery CD-ROMs Pack
Windows XP
Quick Start Guide
Operation Manual
NOTEBOOK COMPUTER
NOTEBOOK COMPUTER
PC-GP2 Series
PC-XXXSeries
OPERATION MANUAL
OPERATION MANUAL
Install the battery pack included with your computer.
2
1. Slide the battery lock lever to the unlocked position ( ).
Battery Lock Lever
2. Install the battery into the computer.
3. Push the battery pack into the computer until you hear the clicking sound.
561867184002
Go to the next page
Page 2
4. Slide the battery lock lever to the locked position ( ).
5. Turn over the computer and go to the next section.
Connect the AC adapter to the computer.
3
AC Adapter Jack
AC Adapter
Power Cord
Open the display cover and set it to a comfortable viewing position.
To Wall Outlet
4
Press the power button to turn on the computer.
5
Remove the optical drive protection sheet.
6
Eject Button
Protection Sheet
Press the eject button to draw out the tray; then, remove the sheet.
Page 3
Setup Windows operating system by following the instructions on the screen.
7
1. Click
Windows
2. Select your location, language and
keyboard; then, click
Next
on
dialog box.
Welcome to Microsoft
Next
.
5. Name your computer if you will be
connecting to a LAN; then click
you want to skip, click
6. Click
Skip
on
An Internet connection
could not be chosen
be able to set up your internet connection
once you have completed the setup.
Skip
.
dialog box. You will
Next
. If
3. Select your time zone; then, click
4. Accept the license agreement; then, click
Next
.
Next
.
7. Select
register with Microsoft later.
8. Enter a user name in the
then click
additional users, we recommend doing
it after completing setup.
No.....
Next
and click
Next
. You can
Your name
. If you wish to add
field;
Go to the next page
Page 4
9. Click
setup.
Activate the integrated antennas for wireless LAN communication.
Finish
to complete the Windows
After a few minutes delay, Windows XP will
start. Double-click the time appearing at
the bottom right of your screen, and set
the correct time and date.
8
To enable the wireless antenna in your computer, press the Fn+F1 keys. When the antenna
indicator is green, the antennas are enabled. Refer to your operation manual and to the
manual of your access point or router for assistance with setting up your wireless network.
Antenna Indicator
To disable the wireless antenna, press Fn+F1 keys again.
Now you are ready to use your computer. Enjoy comfortable
computing with the SHARP PC-GP Series.
Product Information and Customer Assistance
Call: 1-800-BE-SHARP (237-4277)
Sharp Systems of America
5901 Bolsa Avenue, Huntington Beach, CA 92647
Home Page: http://www.sharpsystems.com
E-mail address: support@sharpsystems.com
Loading...