Page 1
Go to the next page
Getting Started With Your
AC Power Cord AC Adapter Battery Pack Modem Cable
Recovery CD-ROMs Pack
Windows XP
Quick Start Guide
Supplement Booklet
Supplement for PC-GPXXXX
Specifications
Operation Manual
NOTEBOOK COMPUTER
PC-GP2 Series
OPERATION MANUAL
NOTEBOOK COMPUTER
PC-XXXSeries
OPERATION MANUAL
Battery Lock Lever
SHARP PERSONAL COMPUTER
THANK YOU FOR PURCHASING THE SHARP PERSONAL COMPUTER. WE HOPE YOU
WILL ENJOY COMFORTABLE COMPUTING, BUT BEFORE STARTING TO USE YOUR
COMPUTER, PLEASE FOLLOW THE INSTRUCTIONS BELOW.
Open the carton box and check that the following items are included:
1
* Carefully inspect each component to make sure nothing is missing or damaged. If any of these
items is missing or damaged, notify your dealer immediately. Be sure to save the shipping
materials and carton in case you need to ship or store the computer in the future.
* Some other brochures or supplements may also be contained.
Install the battery pack included with your computer.
2
1. Slide the battery lock lever to the unlocked position ( ).
2. Install the battery into the computer.
3. Push the battery pack into the computer until you hear the clicking sound.
561867332001
Page 2
4. Slide the battery lock lever to the locked position ( ).
Battery Lock Lever
C
AC Adapter Jack
AC Adapter
Power Cord
To Wall Outlet
A
B
Display Lock Lever
Power Indicator
Power Button
Protection Sheet
Eject Button
5. Turn over the computer and go to the next section.
Connect the AC adapter to the computer.
3
Open the display cover and set it to a comfortable viewing position.
4
Press the power button to turn on the computer.
5
Remove the optical drive protection sheet.
6
Press the eject button to draw out the tray; then, remove the sheet.
Page 3
Go to the next page
Setup Windows operating system by following the instructions on the screen.
7
1. Click
Windows
2. Select your location, language and
keyboard; then, click
Next
on
dialog box.
Welcome to Microsoft
Next
.
5. Name your computer if you will be
connecting to a LAN; then click
you want to skip, click
6. Click
Skip
on
How will this computer
connect to the Internet?
will be able to set up your internet
connection once you have completed
Windows setup.
Skip
.
dialog box. You
Next
. If
3. Select your time zone; then, click
4. Accept the license agreement; then, click
Next
.
Next
.
7. Select
register with Microsoft later.
No.....
and click
Next
. You can
Page 4
8. Enter a user name in the
then click
Next
. If you wish to add
Your Name
additional users, we recommend doing
it after completing setup.
field;
After a few minutes delay, Windows XP
will start. Double-click the time appearing
at the bottom right of your screen, and set
the correct time and date.
Now you are ready to use your
computer. Enjoy comfortable
computing with the SHARP PC-FS
Series.
9. Click
setup.
Finish
to complete the Windows
SUPPORT INFORMATION
PC Hardware Repair Line - 0870 901 3000
(Calls charged at BT national rate)
If you think that there is a problem with your PC hardware (e.g. the tray on the CD-ROM won’t
open or the PC won’t switch on), you should call the Hardware Repair Line.
To use this line, your equipment must still be covered by the manufacturer’s warranty or by a
Mastercare Coverplan/PC Performance service agreement.
You will be asked for your till receipt number or service agreement reference number
when you call, as proof of your entitlement to service. Please have this to hand. You will
also need to have access to your PC when you call.
The Hardware Repair Line is only for customers who have bought their PC from PC World,
Dixons or Currys.
Loading...