SHARP PCE008 Technical Report

COPIER : Z-810

Date

:

Aug. 26, 1997

No. : PCE-0008

[Service Information]

CHANGE IN THE INITIAL SETTINGS OF THE USER SIMULATION.

1.Model Name: Z-810 (only for machines bound for the U.K.)

2.General: A change has been carried out in the initial settings of the user simulation carried out

when the machine is shipped from the factory. This change has been carried out in
accordance with a request from the U.K. In accordance with this change a change has
also been carried out in the operation manual.

3.Description:

Item

Amount of time required to change to the pre-heat mode. 2 3 (90 sec) 0 (OFF)
Amount of time required to change to the auto-power shut-off mode. 3 1 (5 min) 4 (60 min)

4.Action: From 1997 May production.

5.Note: This part is produced in France (SMF).

Please order this part from SMF.

Ref.

Model

name

Version P/G No.

Z-810 U.K.

New type cannot be used in place of current type.

New type can be used in place of current type.

22 -10

No.

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Current parts New parts

Parts code Parts code

TINSE1385FCZZ TINSE0003TSZZ AV Operation manual

Program

No.

Price
rank

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Old New

Parts name

Effec-

tive

time

1st lot

’97/5

Inter-

change-

ability

3

Note

SHARP CORPORATION Printer and Scanner Division

Orange

C