SHARP PCE001 Technical Report

Date: May. 26, 1997

- 1

COPIER: Z820

1. CHANGE IN THE PART CODE FOR THE HIGH VOLTAGE POWER SUPPLY U NIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.

2. MEASURE TO ALLEVIATE PROBLEMS OF SCRAPING OF THE TABLE GLASS DURING THE VIBRATION DROP TEST.

3. MEASURE TO IMPROVE SAFETY IN THE FUSING UNIT.

No. : PCE-0001

1. Change in the part code for the high voltage power sup ply unit ca rrie d out as a measure to improv e pr oduc tivit y.

1.Model Name: Z-810/820/825/830/835/840/845

2.General: The soecification s of the high voltage power supply unit of the mode ls listed abo ve had

been classified by destinat ion, but now h ave be en stand ar d ized.

3.A c ti o n: *1 Japanese domestic production: From 1997 January production.

French (SMF) production: From 1997 February production. Chinese (SOCC) pr odu ctio n: From 1997 Febr uar y produ ct ion.

2. Measure to alleviate pro blem s of scraping of the table glass dur ing the vib ration drop te st .

1.Model Name: Z-810/820/825/830/835/840/845

2.General: There were some problem s of the table gla ss of the models listed ab ove being

scratched dur ing the vibration dr op test due to scr aping of the table glass with the ta ble glass fixing plate. As a meas ure to alleviat e this problem the addition of a glass fixing plate sheet to the table glass fixing plat e has been car r ie d out.

Attachment standard: ± 0.5

Attachment standard:

3.Action: SPF model: From 1996 mid-October production.

Models other than th e SPF mo del: From 1996 Decem be r produ ct ion.

SHARP CORPORATION Printer and Scanner Division

1/2

Orange

3. Measure to improve safety in the fusing unit.

DIC, FZ3600 (Natural)

1.Model Name: Z-810/820/825/830/835/840/845

2.General: A change has been carr ied out in the terminal retaine r of the heater lamp in the fus ing

unit. The change desc ribed below has bee n car ried out as a measur e t o improve saf ety.

Lighten R10 5002C (Black)

3.A c ti o n: *2 Japanese dome s tic pr oduc tion : From the start of 1997 F eb ru ary pro duct ion.

Chinese (SOCC) production: From 1996 mid-December production. French (SMF) production: From 1996 mid-November production.

Ref.

Model name

Z-845

Z-825 Z-835 Z-845

Z-845

Version P/G No.

10 10

Overseas

4—

All

12 -3 LFIX-0196FCZZ LFIX-0504FCZZ AD

No.

Z-810/820 Z-825/830

Z-835/840

Z-810/820 Z-830/840

Z-810/820 Z-825/830

Z-835/840

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Current parts New parts

Parts code Parts code

RTRNZ0521FCZZ RTRNZ0527FCZZ BR

New

PSHEZ4392FCZZ

Price rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

High voltage power supply UN

Glass fixing plate sheet

Heater lamp terminal retainer

Effec-

tive

time

1st lot ’96/12

Mid-

’96/10

Inter-

change-

Note

ability

*1 1

*2 3 Q’ty:2

2/2