Sharp PC-AL27 User Manual

Getting Started With Your

SHARP PERSONAL COMPUTER

THANK YOU FOR PURCHASING THE SHARP PERSONAL COMPUTER. WE HOPE THAT

YOU WILL ENJOY COMFORTABLE COMPUTING, BUT BEFORE STARTING TO USE

YOUR COMPUTER, PLEASE FOLLOW THE INSTRUCTIONS BELOW.

Open the carton box and check that the following items are included:

AC Power Cord AC Adapter Battery Pack

DirectHD Cable

Modem Cable

* Carefully inspect each component to make sure nothing is missing or damaged. If any one of

these items is missing or damaged, notify your dealer immediately. Be sure to save the shipping materials and carton in case you need to ship or store the computer in the future.

* Additional brochures or supplements may also be included.

Windows XP

Quick Start Guide

Operation Manual

NOTEBOOK COMPUTER

PC-GP2 Series

PC-XXXSeries

OPERATION MANUAL

Supplement Sheet

Supplement for PC-RDXX

Specifications

Install the battery pack included with your computer.

1. Turn your computer over and place it on a stable surface.

2. Align the notched parts of the battery pack with the projecting parts of the computer and insert the battery pack.

Projecting Part

Notched Part

Projecting Part

3. Gently push the battery pack into the socket until you hear the clicking sound and the battery stoppers are set back

to the original positions.

Battery Stoppers

4. Turn your computer over and go to the next section.

Connect the AC adapter to your computer.

561868471002

AC Adapter

AC Adapter Jack

AC Power Cord

Go to the next page

Slide the display cover lock lever to the right until the display cover releases, raise the cover and

set it into a comfortable viewing position.

Display Cover Lock Lever

Press the power button to turn on your computer.

When your computer is powered on, the power indicator lights green and the power button blue.

Power Indicator

Power Button

Setup Windows operating system by following the instructions on the screen.

* Do not turn off your computer until completing the Windows setup. If you turn it off, you cannot

set up Windows later.

* Be sure to connect your computer to AC power source. An undercharged battery may not be

able to complete the Windows setup.

* Do not connect any peripheral devices to your computer until Windows setup completes.

Otherwise your computer may malfunction.

* If the display turns off, some power management may function. In this case, press any key to

resume your computer from the power management.

* If you cannot operate the keyboard or the touch pad, press the power button for more than four

seconds to turn off your computer. Be sure that the power indicator turns off; then, after more

than 10 seconds, press the power button to turn it on again.

1. Click

box.

Welcome to Microsoft Windows

dialog

3. Select your time zone; then, click

2. Select your location, language and keyboard; then,

click

4. Accept the License agreement; then, click

+ 2 hidden pages