SHARP NU-E245 User Manual

NU Series (60 cells)
245 W | 240 W | 235 W
Monocrystalline silicon photovoltaic modules
Say yes to solar power!
Because it protects the climate.
Innovations from a photovoltaic pioneer
Sharp photovoltaic modules in the NU series are designed for appli­cations with high power requirements. These quality monocrystalline modules produce a con­tinuous, reliable yield, even under demanding operational conditions.
All Sharp NU series modules offer system integration which is optimal both techni­cally and economically, and are suitable for installations in on and off-grid PV systems.
Product features
High-performance photovoltaic modules made of dark blue
mono crystalline (156.5 mm)2 silicon solar cells with module efficiencies of up to 14.9 %.
Anti-reflex coating to increase light absorption
(for NU-E245J5 and NU-E240J5).
Bypass diodes which minimise the loss in output when shading
occurs.
Textured cell surface for particularly high electricity yields.
BSF structure (Back Surface Field) to optimise cell efficiency.
Use of tempered white glass, EVA plastic, and weather protection
film, as well as a silver anodised aluminium frame with drainage holes for long-term use.
Output: connection cable with waterproof plug connector.
Quality from Sharp
Benchmarks are set by the quality standards of Sharp Solar.
Con tinual checks guarantee a consistently high level of quality. Every module undergoes visual, mechanical, and electrical inspection. This is recognisable by means of the original Sharp label, the serial number, and the Sharp guarantee:
Brief details for the installer
156.5 mm × 156.5 mm dark blue monocrystalline solar cells

60 cells in series

2,400 N/m2 mechanical load-bearing capacity (245 kg/m2)

1,000 V DC maximum system voltage

IEC/EN 61215, IEC/EN 61730, Application class A

Class II (VDE: 40021391)

5 year product guarantee
10 year performance guarantee for a power output of 90%
25 year performance guarantee for a power output of 80%
The detailed guarantee conditions and additional information can
be found at www.sharp.eu.
As at: December 2010
Mechanical data
Current (A)
Power (W)
Open-circuit voltage V
oc
(V)
Short-circuit current I
sc
(A)
50
10
20
30
40
10
Frame
Solar cell Inter-connector
1,652
994
I
sc
V
oc
220
260 240
12 11 10
9 8 7 6 5 4 3 2 1 0
200 180
20
40
60
80
100
120
140
160
0
400 (W/m2)
200 (W/m2)
600 (W/m
2
)
800 (W/m
2
)
1,000 (W/m
2
)
,
Open-circuit voltage V
oc
(V)
Short-circuit current I
sc
(A)
50
10
20
30
40
10
Frame
Solar cell Inter-connector
1,652
994
I
sc
V
oc
Frame
Solar cell Inter-connector
1,652
994
Frame
Solar cell Inter-connector
1,652
994
1,652
994
900± 50
813.5
25
CC
Support rail
125
434.5 10
58
±15
59
46
Side seal
Frame
Glass
Solar cell
Back cover
Plastic
46
Glass
Solar cell
Back cover
Plastic
46
Glass
Solar cell
Back cover
Plastic
2
Cell
Monocrystalline (156.5 mm) silicon solar cell
Quantit y and wiring of cells 60 in series
Dimensions 1,652 × 994 × 46 mm (1.64 m
Weight 19 kg
Connection type Cable with plug connector (MC-3)
2
)
Limit values
Operating temperature (cell) Storage temperature
Storage air humidit y (relative) up to 90 %
Maximum system voltage 1,000 V DC
Maximum mechanical load 2,400 N/m
Over-current protection 15 A
– 40 to + 90 °C
Electrical data
NU-E245 (J5) NU-E240 (J5) NU-E235 (E2)
Maximum power P
Open-circuit voltage V
Short-circuit current I
Voltage at point of maximum power V
Current at point of maximum power I
Module efficiency
max
oc
sc
mpp
mpp
 
m
NOCT 47. 5 4 7.5 47. 5 °C
Temperature coefficient – open-circuit voltage
Temperature coefficient – short-circuit current
Temperature coefficient – power
The electrical data applies under standard test conditions (STCs): irradiation 1,000 W/m tolerance of – 5% / + 10%. NOCT conditions: irradiation of 800 W/m
 V
oc
 l
sc
 P
max
2
2
, ambient temperature of 20 °C and wind speed of 1 m/sec.
with light spectrum AM 1.5 and a cell temperature of 25 °C. The rated electrical characteristics are subject to a manufacturing
245 W
p
240 W
p
235 W
p
37.5 37.3 37.0 V
8.73 8.63 8.60 A
30.5 30.2 30.0 V
8.04 7.95 7.84 A
14.9 14.6 14.3 %
– 130 – 130 – 130 mV / °C
+0.053 +0.053 + 0.053 % / °C
– 0.485 – 0.485 – 0.485 % / °C
2
Characteristic curves NU-E245 (J5)
Characteristic curves: current / power vs. voltage
(cell temperature: 25 °C)
Characteristic curves: open-circuit voltage /
short-circuit current vs. irradiation
(cell temperature: 25 °C)
Applications
On-grid PV systems
O ff-grid PV systems
On-roof PV systems
Ground-mounted PV systems
Please read our detailed installation manual carefully before installing the photovoltaic modules.
Registration
Sharp Solar guarantees safety, produc t quality and value stabilit y for many years – the only thing we ask is: that you register your modules with the serial numbers so we
Voltage (V) Current vs. voltage
Power vs. voltage
Irradiance (W/m
2
)
Exterior dimensions
Rear viewFront view
can send you the warranty certificate. It is quick and easy to register your modules at
www.brandaddedvalue.net
Note
Cross-section A-A’
Cross-section B-B’
Cross-section C-C’
Technical data is subject to change without prior notice. Before using Sharp produc ts, please request the latest data sheets from Sharp. Sharp accepts no responsibility for damage to devices which have been equipped with Sharp products on the basis of unverified information.
The specifications may deviate slightly and are not guaranteed. Installation and operating instructions are to be found in the corresponding handbooks, or can be downloaded from www.sharp.eu.
This module should not be directly connected to a load.
Sharp Energy Solution Europe
a division of Sharp Electronics (Europe) GmbH
Sonninstrasse 3, 20097 Hamburg, Germany
Tel: + 49 (0) 40 / 23 76 - 0 · Fax: + 49 (0) 40 / 23 76 - 21 93
www.sharp.eu
Local responsibility:
Austria
SolarInfo.at@sharp.eu
Benelux
SolarInfo.seb@sharp.eu
Central & Eastern Europe
SolarInfo.scee@sharp.eu
Denmark
SolarInfo.dk@sharp.eu
France
SolarInfo.fr@sharp.eu
Germany
SolarInfo.de@sharp.eu
Scandinavia
SolarInfo.sen@sharp.eu
Spain & Portugal
SolarInfo.es@sharp.eu
Switzerland
SolarInfo.ch@sharp.eu
United Kingdom
SolarInfo.uk@sharp.eu
SolarNU_60NF_E1210
NU-Serie (60 Zellen)
245 W | 240 W | 235 W
Monokristalline Silizium-Photovoltaikmodule
Solarstrom – ja bitte!
Weil er das Klima schützt.
Innovationen vom Photovoltaikpionier
Als Solarspezialist mit 50 Jahren Erfahrung in der Photovoltaik (PV) trägt Sharp entscheidend zu wegweisenden Fort­schritten in der Solar­technologie bei.
Sharp Photovoltaikmodule der NU-Serie sind für Ein­satzbereiche mit hohem Leistungsbedarf ausgelegt. Diese monokristallinen Qualitäts-Module produzie­ren selbst unter anspruchs­vollen Einsatzbedingungen einen dauerhaften, zuverlässigen Ertrag.
Sämtliche Modultypen der Sharp NU­Serie bieten technisch wie wirtschaftlich eine optimale Systemintegration und eignen sich für die Montage in netzge­koppelten PV-Anlagen.
Produktmerkmale
Hochleistungs-Photovoltaikmodule aus dunkelblauen mono kristallinen
(156,5 mm)2 Silizium-Solar zellen mit Modulwirkungsgraden bis zu 14,9 %.
Antireflexbeschichtung zur Erhöhung der Lichtabsorption
(bei NU-E245J5 und NU-E240J5).
Bypass-Dioden zur Minimierung des Leistungsabfalls
bei Ab schattung.
Texturierte Zellenober fläche für besonders hohe Stromerträge.
BSF-Struktur (Back Surface Field) zur Optimierung der
Zellenwirkungsgrade.
Verwendung von vergütetem Weißglas, EVA-Kunststoff und
Witterungs schutz fo lie sowie eines silber eloxierten Aluminium­rahmens mit Entwässerungsbohrungen für den Langzeit einsatz.
Ausgang: Anschlusskabel mit wasser ge schütz tem Steckanschluss.
Qualität von Sharp
Der Qualitätsanspruch von Sharp Solar setzt Maßstäbe. Ständige Kontrollen garantieren eine gleichbleibend hohe Qualität. Jedes Modul wird optisch, mechanisch und elektrisch geprüft. Sie erkennen es am Original Sharp Label, der Seriennummer und der Sharp Garantie:
Kurzinformationen für den Installateur
156,5 mm × 156,5 mm dunkelblaue monokristalline Solarzellen

60 Zellen in Serie

2.400 N/m2 mechanische Belastbarkeit (245 kg/m2)

1.000 V DC maximale Systemspannung

IEC/EN 61215, IEC/EN 61730, Anwendungsklasse A

Schutzklasse II (VDE: 40021391)

Deutschland: INFO-HOTLINE Mo.–Fr. von 8–20 Uhr 01805 / 01 52 22
Österreich: INFO-HOTLINE Mo.–Fr. von 8 –20 Uhr 0820 / 40 06 40 (0,145 € / Min.)
|
INFO-FA X 01805 / 38 32 38 (0,14 € / Min. aus dem deut schen Festnetz, max. 0,42 € / Min. aus dem deutschen Mobilfunknetz)
5 Jahre Produktgarantie
10 Jahre Leistungsgarantie auf eine Leistungsabgabe von 90 %
25 Jahre Leistungsgarantie auf eine Leistungsabgabe von 80 %
Die detaillierten Garantiebedingungen sowie weiterführende Informationen erhalten Sie unter www.sharp.eu.
|
INFO-FA X 0 8 2 0 / 2 4 6 2 5 9 (0,145 € / Min. aus dem Festnetz Österreichs, Anrufe aus dem Mobilfunknet z ggf. teurer)
Stand: Dezember 2010
Loading...
+ 5 hidden pages