Sharp LV-70X500E User guide

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Contents

1. Part Names

1-1. Monitor
1-7. Name of Remote Control Buttons

2. Basic Operation

2-1. Initial Installation
2-3. Basic Operation
2-4. Using Timer
2-6. Listening with Headphones

3. Menu Operation

3-1. How to Use Menu
3-2. How to Use Setup Menu
3-3. List of Setup Menu Items
3-44. How to Use Application Menu
3-45. Entering Letters (Software Keyboard)

4. USB Media

4-1. Before Using USB Media
4-7. Enjoying Photo
4-22. Enjoying Music
4-25. Enjoying Video

5. AQUOS LINK and Other Devices

5-1. Connecting 8K output compatible Device
5-5. Connecting 4K output compatible Device
5-7. Viewing HDR Video (INPUT1, INPUT7)
5-9. Using the AQUOS LINK
5-15. Connecting Recorder, Player, etc.
5-25. Connecting Recorder, Player or Game Player
5-26. Connecting Audio Device
5-27. Connecting PC

6. Operating the Monitor Using a PC (IP control)

6-1. Connecting the Monitor and PC
6-3. Settings to operate the Monitor
6-4. Command list

7. Troubleshooting

7-1. If You Suspect a Problem
7-9. If Error Message Appears
7-11. What If

8. Specifications, etc.

8-1. specifications
8-2. PC Supported signal timing
8-3. AV Supported signal timing
8-4. PC/AV HDMI input terminal pin configuration
8-5. PC/AV D-sub input terminal pin configuration
8-6. Dimensional Drawing
8-7. Setting the Monitor on the Wall
8-8. Software License

Contents

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

ENG Important

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

ENG Important2

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

ENG Important3

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Monitor

Front

Name Page

1

POWER lamp

Lit green: operating state
Lit red: standby state
Unlit: power-off state

2-3

2

Remote control light receiving section

Point the remote control toward this section.

―

1-1

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Monitor

Rear

Name Page

1

Headphone terminal (Ø 3.5, stereo mini jack)

It allows sounds to come out from the speakers even after headphones are connected.

3-34

2

USB1 terminal

Connect USB memory.
You can enjoy photo / music / video files stored in USB memory on the Monitor.
You can use the multimedia auto play function.

3-4 to 4-1

3

USB2 terminal

Connect USB memory.
You can enjoy photo / music / video files stored in USB memory on the Monitor.
You can use the multimedia auto play function.

―

4

INPUT 1 to 3 (HDMI)

Connect 4K or 2K output HDMI compatible device.

5-1 to 5-9,
5-15, 5-17,
5-18, 5-31,
5-32

5

INPUT 5 (AV input) (dual as INPUT 1 / INPUT 6 / INPUT 7 audio input)

Connect the analog audio output from a video game console, video camera or 8K video device.
Be sure to use the supplied conversion cable. When using any conversion cable other than the
supplied one, the Monitor may not operate properly, or a part may be broken.

3-35, 5-19,
5-31, 5-32,
5-33

1-2

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Monitor

Rear

Name Page

6

Analogue audio output terminal

Connect the audio device.

5-26

7

INPUT 7 A to D (HDMI)

Connect 8K image output compatible device.

5-1, 5-2

1-3

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Monitor

Rear

Name Page

8

LAN terminal (10BASE-T／100BASE-TX)

Used for home network, etc.

―

9

INPUT 4 (HDMI)

Connect 4K or 2K output HDMI compatible device.

5-1 to 5-6,
5-15, 5-17,
5-18, 5-32

10

Digital audio output (optical) terminal

Connect the audio device.

5-6

11

INPUT 6 (Analogue RGB)

Connect with the analogue RGB terminal for a computer.

5-33

1-4

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Monitor

Rear

Name Page

12

Power button 2-3

13

MENU button

Displays the menu.

3-2

14

INPUT button

When in the Menu, this functions as the OK button.

1-6

15

forward / backward button

When Menu is operated, it is used as and cursor.

1-6

16

Volume (+ / -) button

When Menu is operated, it is used as right-left cursor.
When in the Menu, this functions as the right-left cursor.

1-6

1-5

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Monitor

Using the button of the Monitor to disable the child lock.

If "The operation with remote control is prohibited" appears on the screen

use the operation button to unlock.

1. Press MENU on the Monitor.

2. Use the volume button on the Monitor to select "Setup" and then press INPUT.

3. Use the volume buttons and forward / backward on the Monitor to select " Ecology" - "Child lock" and press INPUT.

4. Select "Off" and press INPUT.

1-6

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Name of Remote Control Buttons

Button name Page

1

POWER 2-3

2

DISPLAY

Display the information.

―

3

SLEEP ―

1-7

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Name of Remote Control Buttons

Button name Page

4

Number

Also used to enter characters or numbers and perform the setup operations.

―

5

VOL +/- ―

6

AUDIO 2-3

7

MUTE ―

8

INPUT

Also used to change the input source to PC, USB media, etc.

5-22, 5-30

9

CH ―

1-8

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Name of Remote Control Buttons

Button name Page

10

/ / / , ENTER

Used for the menu, character entry, etc.

3-2, 3-45

11

EXIT

Used to quit the menu, character entry, etc.

3-2, 3-45

12

APPS 3-2

13

MENU 3-44

14

RETURN

Used for the menu, character entry, etc.

3-2, 3-45

1-9

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Part Names

Name of Remote Control Buttons

Button name Page

15

OPTION 5-11 to 5-14

16

A/B/C/D

Operation for character entry

3-45

1-10

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Basic Operation

Initial Installation

Perform the following steps before you press POWER on the remote control unit.

1. Insert the batteries into the remote control unit.

2. Plug in the AC cord to the AC outlet.

Language (Language setting)

Select from among 7 languages: English, French, Spanish, German, Italian, Russian and Polish.

1. Press / / / to select the desired language listed on the screen, and then press ENTER.

2-1

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Basic Operation

Initial Installation (Continue)

Location

Select your using location from home use or store use.
Select where this device is being used, between home use or as a shop display unit

2. Press / to select location, and then press ENTER.

2-2

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Basic Operation

Basic Operation

1. Turn on the Monitor
Each time you press the power button on the remote control

turn on or off the Monitor.
After pressing the power button on the rear side of the Monitor

to turn "ON", the POWER lamp turns green.
The POWER lamp will not disapper even though the power is

turned off by pressing the power button on the Monitor.
See "Power Button Setting" (Page 3-4).

2. Adjust the volume
Press "+" to turn the volume up, and "-" to turn it down.

2-3

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Basic Operation

Using Timer

Turning off the power after a specified time (Sleep timer)

This is useful for instance, to fall asleep while watching the Monitor.

Press SLEEP

Each time you press SLEEP, the screen changes as follows.

5 minutes before the power shuts down, the remaining time will be displayed on the bottom left of the screen.
To disable the sleep timer, select "Off".

2-4

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Basic Operation

Using Timer

Turning off the power after a specified time (Sleep timer)
To check the remaining time of the sleep timer

Press APPS

If the sleep timer has already been set, the remaining time will be displayed.
The display of remaining time will disappear after a while.
Do not press the APPS during the display of the remaining time. Otherwise, the remaining time will be affected.

2-5

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Basic Operation

Listening with Headphones

Setting up the headphones

Sets the audio sound that comes out of the speakers / headphone terminal during the use of
headphones.

1. Press MENU to display the home screen

2. Press / / / to select "Setup", and then press ENTER

3. Press / / / to select " (Option)" - "Terminal setting", and then press ENTER

4. Press / to select "Headphone", and then press ENTER

5. Press / to select any of "Mode1"or "Mode2", and then press ENTER

For information on how to adjust the sound / volume of the speakers or headphone jack, see the
following.

Setup

Sound output

Volume control method

Headphone Monitor's speaker

Mode1 o × Adjust the volume by using the volume button on the remote control or the Monitor

Mode2 o o

Adjust the headphone volume by using the volume button on the Monitor

Adjust the speaker volume of the Monitor by using the volume button on the remote control

2-6

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

How to Use Menu

The screen that serves as a gateway to operating the Monitor is called the "Menu".
This section describes how to use Menu.

NOTE

You can also use the buttons on the Monitor to operate the Menu.(page 1-5)

3-1

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

How to Use Setup Menu

Basic operation for using the setup menu

1. Press MENU to display the Menu, press / to select "Setup", and then press ENTER
If / button is pressed, the Menu item can be selected as follows.

Setup Application

Input
List

Link
operation

2. Press / / / to select a desired item, and then press ENTER.
Depending on the selected item, there may be further options to select from.

e.g.: for "Setup"

Initial setup Picture Audio

Information Option Ecology

To select the Menu item (step 1) again, press RETURN.

3-2

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Easy Setup

When you turn on the Monitor for the first time, the “Easy Setup” screen appears. Configure the setting
by following onscreen instructions.

Menu item names

Language

Location

Network setup

IP control setup

This setting is necessary when operating Monitor remotely using a mobile device or a personal computer.

Menu item names Setup

Ethernet setup Change IP address DNS IP address Test, Complete

Initialise

IP control setup

IP control setup Enable, Disable

Detail setting

Change

Login ID,
Password,
Control port

Initialise

3-3

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Multimedia Autoplay

Playback the pictures in the USB memory automatically when power is turned on. Create a folder and
name it as "autoplay", then put pictures into this folder.

Individual setting

Power button setting

The power button on the Monitor can either power off the Monitor or set it to the standby state.

Menu item name Setup

Power button setting

Mode1 The remote control is always on standby mode.

Mode2 Power will only turn on by the Main power button (not Remote Control).

3-4

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Individual setting (Continue)

Standby Mode

IP Control is active even during standby.

Menu item name Setup

Standby Mode

No Go into normal standby.

Yes (Always) The standby power consumption will increase when "Yes" is selected.

USB memory setting

This setting allows you to select a USB memory to be copied pictures.

Menu item name Setup

USB memory setting

Select USB memory Select USB memory to use for copy

Remove selected USB memory Remove the selected USB memory

3-5

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Screen display button setting

This setting allows you to choose the displayed information when you press DISPLAY.

Menu item name Setup

Input display Yes, During Input select, No

Input detail Yes, During Input select, No

Sound/Screen info. Display Yes, During Input select, No

Playback status display Yes, During operation, No

Language

Using the Menu screen, you can switch the on-screen display language to other languages.

Setup

English, Deutsch, Français, Italiano, Español, Русский, Polski

3-6

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Reset

Before transferring or disposing the Monitor, erase all of your personal information.
The information (various adjustment values, LAN setup, passwords, etc.) will be erased.

3-7

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

AV Mode

This function allows you to switch the video and sound to be more suitable for movies, games, etc.

Setup

STANDARD, MOVIE, USER, PC, MOVIE(HDR), PHOTO, DYNAMIC, DYNAMIC(Fixed)

You can also configure these settings from the Application menu(page 3-44)

OPC

Sets to "On: Display" or "On" to automatically adjust the backlight brightness according to the lightness of the area
surrounding Monitor, such as the indoor lighting conditions.

Setup

Off, On, On:Display

3-8

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Backlight

You can adjust the backlight brightness.

Setup

-16 to 0 to +16

Contrast

You can adjust the contrast.

Setup

0 to +40

Brightness

You can adjust the brightness.

Setup

-30 to 0 to +30

3-9

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Colour

You can adjust the colour saturation.

Setup

-30 to 0 to +30

Tint

You can adjust the colour tint.

Setup

-30 to 0 to +30

Sharpness

You can adjust the sharpness.

Setup

0 to +20

3-10

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Advanced

C.M.S.-hue

Adjusts six-color hue.

Menu item name Setup

C.M.S.-hue

R -30 to 0 to +30

Y -30 to 0 to +30

G -30 to 0 to +30

C -30 to 0 to +30

B -30 to 0 to +30

M -30 to 0 to +30

Reset

C.M.S.-saturation

Adjusts six-color saturation.

Menu item name Setup

C.M.S.-saturation

R -15 to 0 to +15

Y -15 to 0 to +15

G -15 to 0 to +15

C -15 to 0 to +15

B -15 to 0 to +15

M -15 to 0 to +15

Reset

3-11

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Advanced (Continue)

C.M.S.-value

Adjusts six-color image value.

Menu item name Setup

C.M.S.-value

R -30 to 0 to +30

Y -30 to 0 to +30

G -30 to 0 to +30

C -30 to 0 to +30

B -30 to 0 to +30

M -30 to 0 to +30

Reset

Colour Gamut Range

Sets the color reproduction range to be displayed.

Setup

Advanced, Standard, Compatibility mode

3-12

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Advanced (Continue)

Colour temp.

You can make adjustments to make the color blueish white (color temperature; high) or redish white (color
temperature: low).
In addition, you can adjust the white balance by changing the R / G B gain values on a per-color temperature
basis.

Menu item name Setup

Colour temperature

Colour temp. High, Middle, Low

R Gain(LO) -30 to 0 to +30

G Gain(LO) -30 to 0 to +30

B Gain(LO) -30 to 0 to +30

R Gain(HI) -30 to 0 to +30

G Gain(HI) -30 to 0 to +30

B Gain(HI) -30 to 0 to +30

Reset

3-13

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Advanced (Continue)

Resolution*

High definition video with sharper images

Menu item name Setup

Details 0 to +10

Narrow edge 0 to +10

Wide edge 0 to +10

HDR-SDR Switch*

Menu item name Setup

Auto Select HDR/SDR mode automatically.

HLG Setting dynamic range to HLG(HDR).

PQ Setting dynamic range to PQ(HDR).

SDR Setting dynamic range to SDR.

Dynamic range expand setting

Sets the local dimming control and the peak brightness.
Enhances the contrast through the use of area-driven backlight.

Setup

0 to +6

NOTE

*Not selectable depending on INPUT or AV mode.

3-14

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Advanced (Continue)

Menu item name Setup

Active contrast

*

On, Off

The video contrast can be automatically adjusted according to the
scene.

Gamma adjustment

*

-3 to 0 to +3

The difference in tone between the bright and dark sections of a video
image can be adjusted.

HDR(PQ) Gamma Setting

*

-2 to 0 to +2

Living room view On, Off Intended to control the tone expression, allowing for extensive viewing

Input range setting Auto, Full, Limited

NOTE

*Not selectable depending on INPUT or AV mode.

3-15

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Advanced (Continue)

Film mode

*1*2*3*4*5

Intended to play back videos, such such as films on a DVD, whose original signal is 24 images per second at high
image quality.

DNR

*1*4*5

This function reduces the noise in the video, smoothening the video.

Menu item name Setup

Film mode

Advanced(High), Advanced(Low),
Standard, Off

DNR Auto, High, Middle, Low, Off

NOTE

*1 Not selectable depending on INPUT or AV mode.
*2 This is not selectable at any time when the input signal is progressive (480p, 720p, 1080p, 2160p).
*3 This is not selectable at any times when the input signal is PC signal.
*4 Not selectable depending on the screen viewed.
*5 The effect may not be discernible depending on the input signal type or video contents.

3-16

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Advanced (Continue)

Range of OPC

You can set the desired maximum / minimum values for the operational sensitivity range when the brightness
sensor (OPC) is set to "ON". The brightness sensor does not work if the set range is narrow, but it depends on the
brightness of the surrounding area.

tem name Setup

Range of OPC

Max. -16 to 0 to +16

Min. -16 to 0 to +16

Reset

Resets all video adjustments to factory defaults.

Setup

Yes, No

3-17

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Auto volume

If the volume level differs in the same input, you can set to adjust the volume automatically.

Setup

High Volume range will be kept very narrow.

Middle Volume range will be kept narrow.

Low Volume range will be kept slightly narrow.

Off This function is disabled. Volume range will be kept as original.

NOTE

If the Clear voice setup is set to "Standard", "Mild" or "Clear", Auto volume is automatically set and cannot be
changed.

This function works only for the audio sounds output from the Monitor' s speakers. It does not work for any audio
sounds from headphones or external speakers.

This function may not be effective enough depending on the contents.

3-18

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Treble

You can adjust Treble

Setup

-15 to 0 to +15

Bass

You can adjust Bass

Setup

-15 to 0 to +15

Balance

You can adjust the balance of the speaker volume for both left and right.

Setup

L30 to Mid to R30

3-19

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Surround

It realizes quasi-space surrounding Monitor, which is filled with realistic sensation, with in-built speakers.

Setup

Auto, On, Off

Select surround mode

Select the mode when surround setting is enabled.

Setup

Living Enjoy three dimensional sound.

Theater Enjoy realistic sound like a theater.

3D Hall Enjoy sound surrounding like a hall.

3-20

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Sound Mode

This function enables you to set the sound quality of the picture mode selected.

Setup

Standard Standard setting.

Dynamic Dynamic sound setting.

Band extension

Expands band area.

Setup

Low + high area, Low area expand, No

Reset

Resets the audio adjustment settings to factory defaults

Setup

Yes, No

3-21

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

View setting for wall mounting

This function is intended to set the sound quality suitable for the wall mount.

Menu item name Setup

View setting for wall mounting Yes, No

NOTE

View setting for wall mounting is intended to set the sound of Monitor typically mounted on wall; however, this

setting may not be applicable depending on the wall material quality or the setting conditions. In such a case, from

the Menu, adjust "Setup" - " (Audio)".
If Clear voice is set to "Standard", "Mild" or "Clear", the view setting is not selectable.
This function works only for the audio sounds output from the Monitor's speakers.It does not work for any audio

sounds from headphones or external speakers.

3-22

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Clear voice

When it is difficult to hear the dialogue of a drama or a movie, this setting makes it easier to hear and understand
by emphasizing the human voice range.

Setup

Standard This audio setting sets the audio volume to that of the standard sound quality.

Mild

It makes sound quality milder than the standard.
Making it easier to listen to dialogue by decreasing sounds effect and noise other than the lines.

Clear

It makes sound quality clearer than the Standard.
Making it easier to hear and understand by clearing the speech quality of the spoken dialogue.

Off This function is disabled. (factory default)

NOTE

This function works only for the audio sounds output from the Monitor's speakers.
It does not work for any audio sounds from headphones or external speakers.

3-23

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Power off linked with an ambient brightness

When the lighted environment surrounding Monitor gets dark, such as when the room light turns off, Monitor is
automatically turned off.

Menu item name Setup

Power off linked with
an ambient
brightness

Cancel, Set Set "Cancel" "Set" of the Light reliant power off function.

Power off transition
time

0min., 15min., 30min.,
60min.

This is set so that Monitor is turned "off" in some minutes after the lightness of the room
reaches a certain level of darkness and then the screen brightness / volume are turned
down.

Icon Setting

Icon and words, Words
only

Select whether to display an icon / message, or a message only, on the screen.

NOTE

If you put an object in front of the brightness sensor, the lightness of the room cannot be detected.

3-24

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Audio only

You can hear only audio sound with no video playing.

Setup

On, Off

NOTE

It is automatically set to "Off" if you operate to restore video or turn the power off once.

To restore video

Perform operations other than "Volume adjustment", "Mute" or "Audio change".

3-25

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

No signal off

Enter standby automitically if no signal is received for 15min.

Setup

Enable, Disable

No operation off

Enter standby automatically if no operation is occured for a preset period.

Setup

Disable, 30min, 1hr.00min., 2hr.00min., 3hr.00min.

3-26

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Game play time

It is a function that displays the play time every 30 minutes to prevent her / him from losing track of time playing
games

It is displayed when the input is changed to INPUT1 to INPUT6.

Setup

On, Off

3-27

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Child lock

You can set to lock the operation of the remote control or Monitor.

Setup

Off, RC control lock, Button control lock

NOTE

In case you lock the remote control operation by mistake, use Monitor operation button (1-6 page) to unlock.

3-28

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Option for view

Menu item name

Multi-audio When a program has multiple audio channels, you can switch between the audio channels.

3-29

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Option for view (Continue)

Menu item name

Wide mode

Depending on the type of content, the black borders around the monitor can be removed by changing the
horizontal or vertical width in the "Wide Mode" setting.
This operation can also be performed from the Application. (page 3-44)
(For information on changing the screen size, see page 5-29.)

About "Screen size"

While displaying images from USB memory, the screen size cannot be changed.

3-30

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Option for view*(Continue)

Menu item name

AQUOS LINK control

Enables operation of an AQUOS LINK device.

Manual

Displays the built-in Operation Manual.

NOTE

*This is not selectable while the manual is displayed. Exit the manual before selecting this.

3-31

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

AQUOS LINK setup

Menu item name Setup

AQUOS LINK control On, Off

Set it to "Off" if the power supply is turned on or the channel changes
automatically when connecting a device that is not AQUOS LINK-enabled.

Auto power on Yes, No

Set it to turn on automatically once an AQUOS LINK-enable device is
operated.

Select AQUOS LINK
device

Select an AQUOS LINK device.

Selecting
channel
key

INPUT1 Auto, On, Off

When you set "Selecting channel key" to "On", you can perform AQUOS
recorder operation with the remote control.(5-13 page)
For "Auto", a device operates in the same manner as it does when this is set
to "Off". Only when there is a request from a connected device however, it will
operate in the same manner as it would when this is set to "On".

INPUT2 Auto, On, Off

INPUT3 Auto, On, Off

INPUT4 Auto, On, Off

Audio return channel Auto, Off

"ARC (Audio Return Channel)" is the function to transmit sound from the
monitor to the AV amplifier, etc. using an HDMI cable. If you set "Audio return
channel" to "Auto", you can connect to an ARC compatible audio device with
a HDMI cable. This function is available only when it is connected to INPUT 2
terminal.

You can also setup from the Application menu (page 3-44)

3-32

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Sleep timer

Turn the power off after the specified time has elapsed
(page 2-4)

Setup

Change Off, 0hr.30min., 1hr.00min., 1hr.30min., 2hr.00min., 2hr.30min.

No

3-33

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Terminal setting

Headphone

Switches the audio sound between speakers and headphones during the use of the headphones.

Menu item name Setup

Headphone

Mode1

This is intended to listen to the Monitor with the headphones alone.Once you connect the
headphones, no sound will come out of the speakers.

Mode2

Sound comes out of the speakers even after the headphones are connected.This is useful for two
people with different needs (one having difficulty listening to the Monitor with the speakers alone
and the other not wanting the volume of the speakers to be too loud) to enjoy watching the
Monitor together.

NOTE

About volume adjustment during "Mode2"

The speaker volume is adjusted by using the remote control.
The headphone volume is adjusted by using the volume (+ / -) button on Monitor.
Even if the MUTE button on the remote control is pressed, the volume of the headphones would not become "0".

3-34

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Terminal setting (Continue)

Analogue Audio output setting

Changes the analog audio output setting.

INPUT1 audio select

*1

Switches the audio input terminal for INPUT 1.

INPUT6 audio select

*2

Sets the audio input for INPUT 6.

Menu item name Setup

Analogue Audio output setting

Mode1 On, Off

Set to the audio output (fixed).
Sounds also come out of the speakers.

Mode2 On, Off

Set to the audio output (variable).
Normally, no sounds come out of the speakers.

Mode3 On, Off

Set to the audio output (variable).
Sounds also come out of the speakers.

INPUT1 audio select

HDMI

Switches the audio input terminal for INPUT 1.

Analogue audio input

INPUT6 audio select

Analogue audio input

Sets the audio input for INPUT 6.

No

NOTE

*1 It is displayed when the input is changed to INPUT1.
*2 It is displayed when the input is changed to INPUT6.

3-35

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Terminal setting (Continue)

Selection of audio sound for INPUT7

*1

Sets the audio input for INPUT7.

Menu item name Setup

INPUT7
audio select

INPUT7-A Uses the INPUT7-A sound.

INPUT7-B Uses the INPUT7-B sound.

INPUT7-C Uses the INPUT7-C sound.

INPUT7-D Uses the INPUT7-D sound.

Audio input terminal Uses the Audio input terminal sound.

Digital audio output

*2

Sets the signal format for digital sound

Menu
item name

Setup

Digital audio
output

PCM

When connecting a device that is not AAC- / Dolby Digital-compatible, set it to "PCM"
(page 5-18). The same sound (Main, sub, M/S) as the program which is being viewed
will be the output.

Bit Stream

To connect an AAC- / Dolby Digital-compatible amplifier, set it to "Bit Stream". Both
the main and sub sound will be simultaneously output.

NOTE

*1 For any INPUT other than INPUT7, it is not displayed.
*2 It is displayed when the input is changed to INPUT1,2,3,4.

3-36

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Terminal setting (Continue)

Input skip

Unused inputs (INPUT1 to 4, INPUT6, INPUT7) can be skipped during input change.

Menu item name Setup

Input skip

INPUT1 (HDMI) Yes, No

INPUT2 (HDMI) Yes, No

INPUT3 (HDMI) Yes, No

INPUT4 (HDMI) Yes, No

INPUT6 (PC) Yes, No

INPUT7 (8K) Yes, No

3-37

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Terminal setting (Continue)

Input label

The device names displayed in the input menu, etc. can be changed to the names of the devices connected to
INPUT 1 to 7.

Menu item name Setup

Input label

*1

(Entry depends on selection) User Setting: EDIT

NOTE

*1 It is displayed when the input is changed to INPUT1 to INPUT7.

3-38

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Terminal setting (Continue)

Suitable mode for signals

Changes the suitable mode for signals in order to maintain compatibility with connected devices. (INPUT 1 only)

Menu item name Setup

Suitable mode
for signals

Full mode
(HDR)

The mode is intended for connected devices that provide support for the high definition
(4:4:4/4:2:2) / wide color gamut (BT.2020) / high contrast (HDR) of 4K video.

Full mode

The mode is intended for connected devices that provide support for the high definition
(4:4:4/4:2:2) / wide color gamut (BT.2020) of 4K video.

Compatibility mode 1

The mode is intended for connected devices that provide support for the high definition
(4:4:4/4:2:2) of 4K video.

Compatibility mode 2 The mode is intended to place high priority on compatibility with connected devices.

3-39

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Terminal setting (Continue)

4K signal for each mode

Setup

Supported
frame rate

Supported

chroma sampling

BT.2020

color gamut

support

HDR

support

Full mode (HDR) 24p/25p/30p/50p/60p 4:2:0/4:2:2/4:4:4 o o

Full mode 24p/25p/30p/50p/60p 4:2:0/4:2:2/4:4:4 o －

Compatibility mode 1 24p/25p/30p/50p/60p 4:2:0/4:2:2/4:4:4 － －

Compatibility mode 2 24p/25p/30p/50p/60p 4:2:0 － －

*If a video or audio sound is not properly output in "Full mode(HDR)" or "Full mode", set it to "Compatibility mode１" or

"Compatibility mode 2".

4K video signal for INPUT2 to 4

Supported frame rate Supported chroma sampling BT.2020 color gamut input support

24p/25p/30p/50p/60p 4:2:0 －

NOTE

It is displayed when the input is changed to INPUT1.
During "Full mode (HDR)", "OPC" (page 3-9) and "Backlight" (page 3-10) can be adjusted independently for
HDR and SDR video contents.

3-40

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Screen effect

Menu item name Setup

Position

H-Pos.

Adjusts the position of a left-aligned or right-aligned image using / button.

V-Pos.

Adjusts the position of an image positioned too high or low using / button.

Reset Resets to factory default.

3-41

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Screen effect (Continue)

Auto Wide

According to the type of original video, you can display the video on the screen of the size most suitable for the
video.

Menu item name Setup

Auto
Wide

Auto Mode Yes, No

In the presence of black curtains / bars at the top and bottom of the video (screen) input from INPUT1
to 5, the screen size will be automatically switched to "Zoom".

HDMI Signal

Enable,
Disable

If any screen size control signal is included in a video input from INPUT1 to 4, the screen size will be
automatically optimized.

3-42

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

List of Setup Menu Items

Identification

Displays the system status

Setup

Start, Test pattern

Software license

Displays software licenses

Software update

Updates software.

Setup

USB update

Manual

Displays E-Manual (operation guide).

3-43

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

How to Use Application Menu

Basic procedure for using the Application

1. Press APPS to display the Application.
You can also use the Application menu by selecting "Application" of the Menu item.

2. Press / to select a desired item, and then press ENTER
You can also select an item by using a channel (number) button on the remote control.

3. Press / to select another desired item, and then press ENTER
Depending on the item selected, you may have to make further item selections.

NOTE

The items in the Application menu vary depending on the currently-displayed screen

3-44

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

Menu Operation

Entering Letters (Software Keyboard)

If you are required to enter letters, use on-screen software keyboard for entry.
The software keyboard will be displayed if you select an entry field and press ENTER.

Software keyboard screen example

1

(Screen showing predictive conversion candidates, character types, etc. is for illustrative purposes only.)

3-45

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Before Using USB Media

What you can do with USB Media

You can play the photo, music or video files stored on USB memory.
In addition, you can copy photos to a USB memory .

4-1

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Before Using USB Media

About USB memories that can be attached to Monitor

Devices that can be connected to USB terminal

USB memory, USB card reader (mass storage class)

File system

FAT, FAT32

NOTE

If you attach a USB memory to Monitor with the power on, the USB Media will be displayed.

4-2

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Before Using USB Media

About USB memories attached to Monitor

How to attach / remove USB memory

Do not remove the USB memory from Monitor while transferring files, viewing slide shows, switching screens or before exiting "USB Media" at the input selection menu.
Do not insert and remove a USB memory repeatedly without any reason.
When using a USB card reader, make sure to insert a memory card in the USB card reader before connecting it to the Monitor.
Do not use any USB extension cable to connect USB memory into the USB terminal on the Monitor.

The Monitor may fail to operate properly if you do so.
Turn off the Monitorbefore removing the USB memory.

4-3

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Before Using USB Media

About files in USB memory that can be played on Monitor

Photo file format

JPEG (jpg) (DCF2.0-compliant)
Maximum resolution (image size): 16384 x 16384 pixels
Minimum resolution (image size): 32 x 32 pixels
If a JPEG still image file is large in size, the file may be required time to display the photo.

4-4

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Before Using USB Media

About files in USB memory that can be played on Monitor

Music file format

FLAC (.fla)
Bit rate: 128k to 2304kbps
Sampling frequency: 8k, 16k, 22.05k, 24k, 32k, 44.1k, 48k, 88.2k, 96k, 192kHz
Quantization bit rate: 8bit, 16bit, 24bit

MP3 (.mp3)
Bit rate: 32 to 320kbps
Sampling frequency: 32k, 44.1k, 48kHz

WAV (.wav)
Bit rate: 64 to 1536kbps (LPCM)
Sampling frequency: 32k, 44.1k, 48kHz

WMA (.wma)
Bit rate: 32 to 384kbps
Sampling frequency: 8k, 11.025k, 16k, 22.05k, 32k, 44.1k, 48kHz

AAC (.m4a / .aac)
Bit rate: 1 to 1728kbps
Sampling frequency:
8k, 11.025k, 12k, 16k, 22.05k, 24k, 32k, 44.1k, 48kHz (AAC)
16k, 22.05k, 24k, 32k, 44.1k, 48kHz (HE-AAC)

4-5

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Before Using USB Media

About files in USB memory that can be played on Monitor

Video file format

m2ts, mp4, 3gp

NOTE

jpeg files in progressive format cannot be supported.
3D-form photos cannot be supported.
Music files in USB1.1 device may not be played properly.
Depending on a certain type of USB memory devices, the stored data may not be recognized in Monitor.
The file name may not be displayed if length of the file name exceeds 80 characters.
Files may not be played properly even if their file format is supported.
Music files which are subject to copyright protection may not be played properly.

4-6

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Displaying photo
About this function

You can display photos on USB memory.

NOTE

It may take more than 20 seconds to display a photo depending on the pixel size.

How to operate

1. Press INPUT, use the / button to select "USB media", and then press ENTER

Once USB memory is connected, "USB media" will be automatically displayed.

2. Press / to select "Photo mode", and then press ENTER

4-7

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Displaying photo

4. Press / to select a folder, and then press ENTER

5. Press / / / to select photo, and then press ENTER

The photo appears full-screen.
If you select a folder, all images in the folder will be displayed.
By pressing RETURN, you can return to photo select screen.

NOTE

If there is an invalid photo file, X mark is played on the thumbnail.
At the bottom left corner of the photo select screen, file name, photo data*, pixel / file size, and remaining capacity
of the media are displayed.
Only EXIF file format data can be shown.
Depending on a certain photo data, they may not be displayed as thumbnail.
When any photo is not shown but an error message appears, see "Error Message about USB Media" (pages 7-9
to 7-11).

4-8

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Operation during photo display
About this function

When viewing photos, you can switch to the next photo.
A guidance (operation guide) indicating the operation method is displayed at the bottom of the screen. Press the

buttons according to the guidance display to operate.

NOTE

Photos cannot be rotated.

Operation while displaying the photo

/ : Switch to previous or next photo in the same folder.

C: Toggles between displaying and not displaying the operation guide.
APPS: Displays the function menu.
RETURN: Returns to the display list.
EXIT: Quits the USB Media.

4-9

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Switching photo display mode
About this function

You can switch the photo display mode

How to operate

1. During the display of photo, press APPS, use the / button to select "Screen Size", and then press ENTER

2. Use the / button to specify the desired setting, and then press ENTER

About display mode switch item and photo display

4-10

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Enjoying slide show
About this function

Photos can be displayed as a slide show.
The photos from USB memory can be selected to be displayed as slide show.

4-11

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Enjoying slide show
To play a slide show based on photo list

1. Press INPUT, followed by / to select "USB media" and then press ENTER

2. If more than one USB memory are connected, select desired memory with C

3. Press / to select "Photo Mode", and then press ENTER

4-12

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Enjoying slide show
To play a slide show based on a photo list.

4. Press / to select a folder, and then press ENTER

5. Press C

Photo selection mode will be used to display photos. Press / / / to select the photos to be displayed as a
slide show. Press D to toggle between selecting / deselecting the photos.
To select / deselect photos all at once, press Apps, and then choose between "Set all slide show image" or
"Reset all slide show image" from the function menu.
Press C to start slide show.

To quit the slide show, press Return.

4-13

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Setting up slide show
About this function

1. Press APPS on the photo list screen to display the function menu.

2. Press / to select "Slide Show Setup", and then press ENTER

3. Press / to select the setting, and then press ENTER

4-14

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Setting up slide show

Slide show interval

Set the time duration before switching to the next picture.
Depending on the photo, the display may not be switched according to the set time.

Slide show off timer setting

Set the timer for the slide show. The power will automatically turn off after the set time duration.
This is a function that can be helpful should you forget to turn off the power supply when using this machine as a large screen photo frame.
The timer will start only during slide show operation.

Low brightness mode

Reduces glare so that the slide show can be enjoyed better.
Even when displaying a slide show for a long duration, the power consumption can be reduced to a certain degree.

(The power consumption reduction depends on the environment and the photos.)

4-15

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Selecting BGM for a slide show
About this function

Choosing the music (BGM) that will be played when displaying the slide show.
The music stored in the USB memory can be used as BGM.

1. Press B in the slide show picture selection mode.

2. Press / / / to select the media, and then press ENTER

3. Press / to select the folder that contains the audio file to be made as BGM, and then press ENTER

4. Press / to select the audio file that will be made as BGM, and then press D to select / deselect it

5. Press RETURN to return to the screen which is displayed for selecting the folder.

6. Press RETURN to return to the slide show photo selection mode.

7. Press C in photo selection mode to start the slide show.

NOTE

In initial setting, all music files are selected by default.
During the display of the slide show, the selected BGM will be repeatedly played back.

4-16

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Copying photo
About this function

Copying a photo from USB memory to another memory.
When copying a photo to an SD memory card, a USB card reader is needed.
Attach the USB memory to be used for copying to the Monitor in advance.
Specify the copy destination by using the Setup menu, and then use USB Media to perform copy operation.

To copy photos, more than one USB memories need to be connected. However, only one connection is
allowed when setting the USB memory destination.

Specify the destination to copy the photo

1. Make sure that only one USB memory is attached to the Monitor.

2. Press MENU to display the Menu, press / / / to select "Setup", and then press ENTER

3. Press / / / to select "(Initial Setup)" - "Individual setting" - "USB memory setting", and then press ENTER

4. Press / button to select "Select USB memory", and then press ENTER

5. Press / button to select "Yes", and then press ENTER
For information on copy operation, see page 4-18.

4-17

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Copying photo

To copy photos, more than one USB memories need to be connected. However, only one connection is allowed
when setting the USB memory destination.

1. Connect the USB memory destination.

2. If more than one USB memory are connected, select desired memory with C.

3. Press , and then press / to select a memory on which the target photo is stored, and then press ENTER

4. Press / to select "Photo Mode", and then press ENTER

5. Press / to select the folder containing the target photo, and then press ENTER

6. Press APPS or A,followed by / to select "Copy picture", and then press ENTER

7. Select the copy source from "All folder", "Current folder" or "Selected file", and then press ENTER
If you select "Selected file", the image selection screen will be displayed.

Press / / / and D to select the file to be copied, and then press A.

8. Press / to select the destination to save, and then press ENTER

9. Press / to select the folder to save the file, and then press ENTER
If you select "Create new folder", you can create a new folder.

A software keyboard appears, which you will use to enter the name of the folder.(page 3-45)

10. Use the / button to select "Yes", and then press ENTER

11. Press ENTER on the confirmation screen.

4-18

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Copying photo

NOTE

The limit for the file name is up to 80 two-byte or 160 one-byte characters. Files name that exceed the limit cannot be copied.
If the input source is changed during copying photo, the copying operation will be interrupted.
If there are photos with the same file names, it will be copied up to 10 items, and "(01) to (10)" will be added at the end of the file name by default.
When "All folder" / "Current folder" is specified, only the files that does not exist in destination will be copied.

To remove USB memory that is used as copy destination,
see page 4-20.

For information of USB memories that are available for Monitor,
see page 4-2.

4-19

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

To remove the USB memory that is used as the copy destination
How to operate

1. Press MENU to display the Menu, press / / / to select "Setup", and then press ENTER

2. Press / / / to select " (Initial Setup)" - "Individual setting" - "USB memory setting", and then press

ENTER

3. Press / to select "Remove selected USB memory", and then press ENTER

4. Press ENTER

5. Press ENTER

6. Remove USB memory

NOTE

Even after selecting "Remove selected USB memory", data in the USB memory can still be viewed through
"USB Media" until the USB memory is physically removed.

After selecting "Remove selected USB memory", the copy / delete function will not be available. To enable the
copy / delete function, remove and reconnect the USB memory physically. (will be automatically specified again)

4-20

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Photo

Deleting photo
About this function

You can delete unnecessary photos stored on a USB memory.

How to operate

1. Press APPS on the photo list screen to display the function menu.

2. Use the / button to select "Delete photo", and then press ENTER

3. Use the / button to select the target file from "All folder", "Current folder" or "Selected file", and then press

ENTER

If you select "Selected file", the image selection screen is displayed. Use the / / / button and D to select the
target file, and then press A.

4. Use the / button to select "Yes", and then press ENTER

5. Press ENTER

4-21

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Music

Playing back music
About this function

You can play back music file in USB memory.

How to operate

1. Press INPUT, followed by / to select "USB media", and then press ENTER

2. Press / to select "Music Mode", and then press ENTER

3. Press / / / to select a song title, and then press ENTER

4-22

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Music

Playing music

Music is played.
When selecting a folder, music files in that folder will be displayed.
Press RETURN to display the previous screen.
When there are multiple music files in the same folder as the music file which is being played, the music files in

the folder will be played in order, and after the last file is played, the first file will be replayed.
Press D to place check mark at the check box which is on the left side of the music file, then only the selected file

will be played. If "Set all auto play" is selected from the menu which is displayed after pressing APPS, check
mark will be placed at all music files, and if "Reset all auto play" is selected, check mark will disappear from all
music files.

If "AV Mode" is selected from the menu which is displayed after pressing APPS, image and sound quality can be
changed.

For information of the setup items for "AV Mode", see page 3-6.

NOTE

If there is an invalid music file, an x-mark will be displayed at the file.
For a variable bit rate file, the playback time displayed may differ from the actual playback time. In addition,

playback may stop even if the progress bar display is in progress.

4-23

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Music

How to operate during the playback of music
Playing music that is store on USB memory.

RETURN: Returns to the previous step.
A: Plays / stops music playback.
B: Stops playing music.
D: Selects / deselect the music that will be played.
APPS: Displays the function menu.

4-24

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Video

Playing video
About this function

You can play a video from USB memory.

How to operate

1. Press INPUT, use / to select "USB media", and then press ENTER.

Once USB memory is connected, "USB media" will be automatically displayed.

2. Press / to select "Video mode", and then press ENTER

4-25

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Video

Playing video

3. Use the / / / button to select a video, and then press ENTER

The video will be played back.
If you select a video that you watched halfway through, the video will resume from where you left off.
If you select a folder, any videos in the folder will be displayed.

RETURN allows the preceding screen to be displayed.

NOTE

If there is an invalid video file, an x-mark is displayed at the file.
For a variable bit rate file, the playback time displayed may differ from the actual playback time. In addition, it may

even end halfway through the progress bar.
A video that cannot be played back on Monitor may be displayed.
It is not ensured that any videos displayed can be properly played back.

Resume playback

Up to 50 videos, which played back halfway through, can be retained by Monitor in reverse chronological order.If
you select this, the video resumes from where you left it off the last time.

Some types of videos may prevent you from resuming playback.

To play back from the beginning

Use the up / down cursor button to select a video, and press A.

4-26

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Video

How to operate during the playback of video

1. Press APPS during the playback of VIDEO to the Application menu.

2. Use the / button to select "Operation Panel," and then press ENTER

How to use the operation panel

4-27

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

USB Media

Enjoying Video

How to operate during the playback of video
Operations during the playback of video

You can perform operations such as pausing or playing a video.

Plays the video.

Pauses the video.

Fast reverses the video. Press the button down again to speed up.(4 steps)

Returns to the beginning of the chapter being viewed now.

Fast forward the video. Press the button down again to speed up.(4 steps)

Locates the beginning of the next chapter.

Stops playback of the video, and returns to the video list screen.

Rewinds the video by 10 seconds.

Fast forward the video by about 30 seconds.

NOTE

Some types of videos may prevent you from performing certain button operations.
Available operations vary depending on the video viewed. Unavailable buttons are not displayed.
Playback time can be navigated using the 10 sec REWIND / 30 SEC FF (approximate time) operations.xs
During the speeding up or slowing down of playback, there may be no audio output.

4-28

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

AQUOS LINK and Other Devices

Connecting 8K output compatible Device

Connecting 4 pieces of HDMI cable (8K output compatible device) to INPUT 7 (A / B / C / D)
Connecting to 8K output compatible device

Connects the Monitor to 8K output (7680 × 4320 of resolution output) compatible equipment by using 4 HDMI
cables.

When connecting an 8K output compatible device to the Monitor, use commercially available premium HDMI
cables.
Connect the devices properly so that the output signal from the 8K output compatible device can be displayed at the
appropriate position.
Video images from the HDMI input terminal are displayed at the position as shown on the right.

INPUT 7 (A to D) are 8K input-specific terminals.
Multi-screen display by using 8K signal is not supported.
8K display is possible whenever any input signal to INPUT 7 (A to D) is synchronized.
Under the factory default setting, INPUT7-A is set as the sound input.

To change the factory default setting, switch to INPUT7, select "Setup" - " (Option)" - "Terminal setting" -

"INPUT7 audio select" from the Menu, and then select input for audio sound.
Read the operation manual on the device to be connected to the Monitor as well.

◆Important◆

Use / connect four HDMI cables of the same type and brand, otherwise performance cannot be guaranteed.
Input the format 3840×2160 (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) to each terminal of INPUT 7 (A to D).

If any format other than the above is input, the video or picture may be distorted.

5-1

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

AQUOS LINK and Other Devices

Connecting 8K output compatible Device

Connect four HDMI cables (8K output compatible device)

A commercially available premium HDMI cable is required.

5-2

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

AQUOS LINK and Other Devices

Connecting 8K output compatible Device

Supported format

7680 × 4320 (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)

How to switch to 8K video input

Press INPUT on the remote control. During the display of the input change menu, use the / to select "INPUT7",
and press ENTER.

Channel number to be displayed during use of 8K video input

When a synchronizing 8K signal is input to INPUT7 (A to D), the video information is displayed as "4320p".

NOTE

"Out of range" message will be displayed if an unsupported signal is input. In such situation, refer to the
operation manual of the connected device and change to the supported signal.

Video will not be displayed properly if input signals are not synchronized.

5-3

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

AQUOS LINK and Other Devices

Connecting 8K output compatible Device

Supported audio sound signals

Type: Linear PCM
Sampling frequency: 48kHz / 44.1kHz / 32kHz

How to change the input audio sound

Press INPUT on the remote control. During the display of the input change menu, press / to select "INPUT7",
and press ENTER. Press MENU, followed by / / / and ENTER to select "Setup" - " (Option)" - "Terminal

setting" - "INPUT7 audio select", then select input for audo sound.

NOTE

When "Audio input terminal" has been selected for "INPUT7 audio select", no sound will come out of the
Monitor if you connect between the Monitor and a typical HDMI compatible device using an HDMI cable instead of
an analog audio cable. (An analog audio cable needs to be connected)
To connect the Monitor to a HDMI compatible device using an HDMI cable alone, select the input to which the
device has been connected in "INPUT7 audio select".

5-4

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

AQUOS LINK and Other Devices

Connecting 4K output compatible Device

Connecting a 4K output compatible BD recorder

Connecting a 4K output compatible AV amplifier

NOTE

A commercially available premium HDMI cable is required.
Only INPUT 1 supports for 4K50p/60P (4:2:2:, 4:4:4) signals.

5-5

3/6/2018 Sharp operation manual

Contents

1. Part Names

2. Basic Operation

3. Menu Operation

4. USB Media

5. AQUOS LINK and Other

Devices

6. Operating the Monitor

Using a PC (IP control)

7. Troubleshooting

8. Specifications, etc.

You can select an OSD language from among 7
languages.

English >>

Deutsch >>

Français >>

Italiano >>

Español >>

Русский >>

Polski >>

Ver. 1.15

＞

＜

AQUOS LINK and Other Devices

Connecting 4K output compatible Device

Connecting 4K output compatible device

Use a PC that supports 4K output (resolution output of 3840 × 2160).

NOTE

A commercially available HDMI-certified cable (Premium HDMI cable) is required.
Only INPUT 1 supports for 4K50p/60P (4:2:2:, 4:4:4) signals.

5-6