SHARP LQ150X1LW12 Specification

SPEC No.

RECORDS OF REVISION

LQ150X1LW12

DATE SUMMARY

REVI

SED

No

PAGE

NOTE

LD-24702A -

2012/7/19

- Contents -

No. page

1 Application ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1

2 Overview ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2

3 Mechanical Specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2

4 Input Terminals ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3

5 Absolute Maximum Ratings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9

6 Electrical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10

7 Timing characteristics of input signals ・・・・・・・・・・・・・・・・・・・・・・ 12

8 Input Signals, Basic Display Colors and Gray Scale of Each Color ・・ 13

9 Optical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15

10 Handling Precautions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17

11 Packing form ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18

12 Reliability test items ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18

13 Others ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 19

14 Storage conditions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 20

Fig.1 OUTLINE DIMENSIONS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 21

Fig.3 PACKING FORM ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22

LD-24702A- 1

1．Application

This specification applies to the color TFT-LCD module LQ150X1LW12.

This specification is the proprietary product of SHARP CORPORATION (SHARP) and include

materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in

any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express

written permission of SHARP.

The device listed in this specification was designed and manufactured for use in general electronic

equipment.

In case of using the device for applications such as control and safety equipment for transportation (controls of

aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which

require higher reliability and safety, take into consideration that appropriate measures such as fail-safe

functions and redundant system design should be taken.

Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications,

telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment

for life support.

SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply

with the instructions and the precautions specified in this specification .

Contact and consult with a SHARP sales representative for any questions about this device.

LD-24702A- 2

2．Overview

　　 This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).

　　It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a White-LED

　　Backlight unit. Graphics and texts can be displayed on a 1024×RGB×768dots panel with about 10 million

　　colors by using LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for

　　TFT-LCD panel driving and supply voltage for backlight.

It is a wide viewing-angle-module (Vertical viewing angle:170°Horizontal viewing angle:170°,CR≧10).

3．Mechanical technical literatures

Parameter

Display size

Active area

Pixel format

Aspect ratio

Pixel pitch

Pixel configuration

Display mode

Unit outline dimensions

【*1】

Mass

Surface treatment

(1pixel＝R＋G＋B dot)

331.6（W)×254.7（H)×9.3(D) mm

Anti-glare and hard-coating 3H

technical literatures

38（15inch）Diagonal

304.1（H)×228.1（V)

1024（H)×768（V)

4：3

0.297（H)×0.297（V)

R,G,B vertical stripe

Normally black

950 （Max.）

Unit

cm

mm

pixel

mm

g

【*1】 Excluding the protrusion of the connector cover from thickness.

Outline dimensions are shown in Fig.1.

LD-24702A- 3

4．Input Terminals

4-1．TFT-LCD panel driving

CN1（Interface signals and +3.3V power supply）

Using connectors：DF14H-20P-1.25H(56)　(Hirose Electric Co., Ltd.)

Corresponding connectors：DF14-20S-1.25C(conector)　(Hirose Electric Co., Ltd.)

　　　　　　　　：DF14-2628SCFA(terminal)　(Hirose Electric Co., Ltd.)

Using LVDS receiver：Building into cotrol IC（THC63LVDF84B（Thine electronics）　or　Compatible product）

Corresponding LVDS transmitter：THC63LVDM83D（Thine electronics） or　Compatible product

CN1

Pin

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15

Symbol

VCC
VCC
GND

GND
RxIN0­RxIN0+

GND
RxIN1­RxIN1+

GND
RxIN2­RxIN2+

GND
CK IN­CK IN+

Function

+3.3V Power supply
+3.3V Power supply

GND

GND
LVDS receiver signal CH0 (-)
LVDS receiver signal CH0 (+)

GND
LVDS receiver signal CH1 (-)
LVDS receiver signal CH1 (+)

GND
LVDS receiver signal CH2 (-)
LVDS receiver signal CH2 (+)

GND

LVDS receiver signal CK (-)
LVDS receiver signal CK (+)

Remark

LVDS
LVDS

LVDS
LVDS

LVDS
LVDS

LVDS

LVDS
16
17
18
19
20

【*1】 　RL/UD = LOW 　RL/UD = HIGH

【*2】 SELLVDS is shown in 4-2.

GND
RxIN3­RxIN3+ LVDS
RL/UD

SELLVDS

Horizontal/Vertical display mode select signal

LVDS receiver signal CH3 (-)
LVDS receiver signal CH3 (+)

GND

LVDS SET

LVDS

【*1】
【*2】

4-2．Data Mapping

1) 8 bit input

　 pin assignment with SELLVDS pin 　(THC63LVDM83D（Thine electronics） or　Compatible product)

20Pin SELLVDSTransmitter

LD-24702A- 4

Pin No

51 TA0

Data

= L(GND) or Open = H(3.3V)

R0 (LSB) R2

52 TA1 R1 R3

54 TA2

R2 R4

55 TA3 R3 R5

56 TA4 R4 R6

3 TA5 R5

4 TA6 G0 (LSB)

R7 (MSB)

G2

6 TB0 G1 G3

7 TB1 G2

G4

11 TB2 G3 G5

12 TB3 G4 G6

14 TB4 G5 G7 (MSB)

15 TB5 B0 (LSB) B2

19 TB6 B1 B3

20 TC0 B2 B4

22 TC1 B3 B5

23 TC2 B4 B6

24 TC3 B5 B7 (MSB)

27 TC4 (HS) (HS)

28 TC5 (VS) (VS)

30 TC6 DE DE

50 TD0 R6 R0 (LSB)

2 TD1 R7 (MSB) R1

8 TD2 G6 G0 (LSB)

10 TD3 G7 (MSB) G1

16 TD4 B6 B0 (LSB)

18 TD5 B7 (MSB) B1

25 TD6 (NA) (NA)

< SELLVDS = L(GND) or Open >

R1 R0 G0 R5 R4 R3 R2 R1 R0 G0

G2 G1 B1 B0 G5 G4 G3 G2 G1 B1

B3 B2 DE (VS) (HS) B5 B4 B3 B2 DE

LD-24702A- 5

1 CYCLE

R7 R6 NA B7 B6 G7 G6 R7 R6 NA

< SELLVDS = H(3.3V) >

R3 R2 G2 R7 R6 R5 R4 R3 R2 G2

G4 G3 B3 B2 G7 G6 G5 G4 G3 B3

B5 B4 DE (VS) (HS) B7 B6 B5 B4 DE

1 CYCLE

R1 R0 NA B1 B0 G1 G0 R1 R0 NA

DE：DATA ENABLE

HS：Hsync

VS：Vsync

NA：Non Available

1) 6bit input

　 pin assignment with SELLVDS　(THC63LVDM83D（Thine electronics） or　Compatible product)

Transmitter 20Pin SELLVDS

Pin No Data = L(GND) or Open = H(3.3V)

LD-24702A- 6

51 TA0

52 TA1

54 TA2

55 TA3

56 TA4

3 TA5

4 TA6

6 TB0

7 TB1

11 TB2

12 TB3

14 TB4

15 TB5

19 TB6

20 TC0

22 TC1

23 TC2

24 TC3

27 TC4

28 TC5

30 TC6

50

2

8

TD0

TD1

TD2

10 TD3

16 TD4

18

TD5

25 TD6

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

R0 (LSB)

R1

R2

R3

R4

R5 (MSB)

G0 (LSB)

G1

G2

G3

G4

G5 (MSB)

B0 (LSB)

B1

B2

B3

B4

B5 (MSB)

(HS)

(VS)

DE

GND

GND

GND

GND

GND

GND

(NA)

< SELLVDS = H(3.3V) >

R1 R0 G0 R5 R4 R3 R2 R1 R0 G0

G2 G1 B1 B0 G5 G4 G3 G2 G1 B1

B3 B2 DE (VS) (HS) B5 B4 B3 B2 DE

DE：DATA ENABLE

LD-24702A- 7

1 CYCLE

HS：Hsync

VS：Vsync

NA：Non Available

Recommended input (17pin, 18pin at 6bit )

LVDS Transmitter

LOW DATE

4-3．LED backlight

　　LED backlight connector

CN2 J.S.T. Mfg. Co. Ltd

Used connector ： SM06B-SHLS-TF ( )

No.17Pin

No.18Pin

or

470Ω

240Ω

3.3V
No.17Pin

No.18Pin

LCD Module

LVDS Receiver

100Ω

Corresponding connector ： SHLP-06V-S-B ( )

J.S.T. Mfg. Co. Ltd

Connector No. Pin No. symbol function

1 VDD

2 VDD

3

GND

+12V power supply

+12V power supply

GND

CN2

4

GND

5 XSTABY

6 VBR

Backlight ON/OFF signal

GND

PWM signal

4-4．Interface block diagram

te

a

c

cu

ts

te

a

c

cu

ts

①8 bit input

(Computer　Side)

SELLVDS = L(GND) or Open

LD-24702A- 8

(TFT-LCD side)

Controller

R0-R5,G0

G1-G5,B0,B1

B2-B5, NA,NA,DE

R6,R7,G6,G7,

B6,B7,NA

CK

②8 bit input
SELLVDS = H(3.3V)

Controller

R2-R7,G2

G3-G7,B2,B3

B4-B7, NA,NA,DE

R0,R1,G0,G1,

B0,B1,NA

7

　TA 0 - 6

7

　TB 0 - 6

7

　TC 0 - 6

7

7

　TA 0 - 6

7

　TB 0 - 6

7

　TC 0 - 6

7

TD 0 - 6

TD 0 - 6

CＬK IN

THC63LVDM83D

TTL PARALLEL-TO-LVDS

PLL

THC63LVDM83D

TTL PARALLEL-TO-LVDS

RXIN0+

RXIN0-

RXIN1+

RXIN1-

RXIN2+

RXIN2-

RXIN3+

RXIN3-

RXCKIN+

RXＣKIN-

RXIN0+

RXIN0-

RXIN1+

RXIN1-

RXIN2+

RXIN2-

RXIN3+

RXIN3-

Single LVDS interface contained in a control IC

RA 0 - 6
　RB 0 - 6

　RC 0 - 6

RD 0 - 6

LVDS-TO-PARALLEL TTL

PLL

Single LVDS interface contained in a control IC

CK OUT

　RA 0 - 6

　RB 0 - 6

　RC 0 - 6

RD 0 - 6

LVDS-TO-PARALLEL TTL

i
ir

l
rn

In

i
ir

l
rn

In

③6 bit input
SELLVDS = H(3.3V)

Controller

R0-R5,G0

G1-G5,B0,B1

B2-B5, NA,NA,DE

ALL GND

CK

CK

7

　TA 0 - 6

7

　TB 0 - 6

7

　TC 0 - 6

7

TD 0 - 6

CＬK IN

CＬK IN

PLL

THC63LVDM83D

TTL PARALLEL-TO-LVDS

PLL

RXCKIN+

RXＣKIN-

RXIN0+

RXIN0-

RXIN1+

RXIN1-

RXIN2+

RXIN2-

RXIN3+

RXIN3-

RXCKIN+

RXＣKIN-

PLL

Single LVDS interface contained in a control IC

CK OUT

　RA 0 - 6

　RB 0 - 6

　RC 0 - 6

RD 0 - 6

LVDS-TO-PARALLEL TTL

PLL

CK OUT

Internal circuits

5．Absolute Maximum Ratings

S

LD-24702A- 9

Parameter

Supply voltage

Symbol

Vcc

DD

V

Condition

Ta=25℃

Ta=25℃

Pin

VCC

VDD

Ratings

-0.3　～ +4.0

-0.3 ～ +15.0

Unit Remark

【*1,2】V

V

【*1,2】

RxINi-/+

V

Ⅰ1

Ta=25℃

V-0.3～Vcc+0.3

i=0,1,2,3

CK IN-/+

Input voltage

Storage temperature

Operating temperature

V

Ⅰ2

V

Ⅰ4

T

STG

T

OPA

Ta=25℃

Ta=25℃

－

－

L/UD,SELLVD

XSTABY, VBR

- -25　～ +65 ℃

-℃

-0.3～Vcc+0.3 V

-0.3～V

DD V

0　～ +65

【*1】

【*1,3,4】

【*1】 Humidity：95%RH Max.( Ta≦40℃ ) Note static electricity.

Maximum wet-bulb temperature at 39℃ or less. (Ta>40℃) No condensation.

【*2】 The Vcc power supply capacity must use the one of 3.5A or more.

The V

DD power supply capacity must use the one of 3.5A or more.

【*3】 There is a possibility of causing deterioration in the irregularity and others of the screen and the display

fineness though the liquid crystal module doesn't arrive at destruction when using it at 60～65℃.

【*4】 In the operating temperature item, the low temperature side is the ambient temperature regulations.

The high temperature side is the panel surface temperature regulations.

6．Electrical Characteristics

6-1．TFT-LCD panel driving

LD-24702A- 10

T

＝+25℃

a

Parameter

Supply voltage 3.0

Symbol

V

Current dissipation

Input voltage width for LVDS receiver

Permissive input ripple voltage

Differential input

Threshold voltage

High

Low

V
V

Input voltage

Input reak current

Terminal resistor

Condition

CC

I

Vｃｃ=3.3V -

CC

V

L

RP

TH

V

TL

V

IH

V

IL

I

OH

I

OL

R

T

【*1】 On-off conditions for supply voltage

0.9 V

CC

0.1 V

CC

V

CC

Data

Back light

t

1

t

2

ON

t

5

OFF OFF

Min.

0
－ － 200
－－

V

-100

CM

2.1
－
－

-10
－

0.9 V

t

3

t

6

0.1 V

t

4

Typ. Max.

3.3

360 800

－ 2.4

－
－
－ 0.8
－
－

100 －

CC

CC

Unit

3.6

V

mA

V

mV

P-P

V

CM

+100

－

mV
mV

V

V
400
+10

μA
μA

Ω

20μs ＜ t1≦ 10ms

0＜t

0＜t

1s ≦ t

300ms ≦ t

200ms ≦ t

≦ 20ms

2

≦1s

3

4

5

6

Remark

【*1】
【*2】

Vcc = 3.3V

=+1.2V

V

CM

【*3】
【*4】－

V

=

+3.3V【*4】

I2

V

=0V 【*4】

I2

Differential input

Vcc-dip conditions

・

V

CC

Vth＜VCC≦V

min

td≦ 10ms

Vmin

V

th

t

d

Hsync/Vsync need not be input so that this model may drive only by the ENAB signal.

・󲻌

Even if Hsync/Vsync is input, it doesn't become a malfunction.
The relation between the data input and the backlight lighting will recommend the above-mentioned input sequence.

・󲻌

When the backlight is turned on before the panel operates, there is a possibility of abnormally displaying.
The liquid crystal module is not damaged.

Vth=2.5V

=3V

V

min

【*2】　Current dissipation

・V

Vcc-dip conditions should also follow the On-off
conditions for supply voltage

＜V

CC

RGB RGB RGB RGBRGB
GS0 GS1 GS2 GS251 GS252

th

・・・

Typical current situation : 253-gray-bar pattern

（ Vcc=+3.3V、fck = 65MHz、Ta=25℃）

【*3】　V

：　LVDS common mode voltage

CM

【*4】　RL/UD , SELLVDS

6-2．LED backlight

V

Parameter

Symbol Min. Typ. Max.

LD-24702A- 11

Ta＝+25℃

Unit

Remark

Supply voltage

DD 10.2 12.0

V

I

DD1 - 750

Current dissipation

DD2 --

I

Permissive input ripple voltage

High voltage V

RP_BL

IH_BL1

XSTABY

Low voltage V

High voltage V

VIL_BL1

V

IH_BL2

VBR

Low voltage V

PWM frequency

IL_BL2

PWM 50.0 - 1k

PWM duty 100.0DPWM 1.0 - 【*4,5】

Life time L

【*1】 On-off conditions for supply voltage

0.9 VDD

0.1 VDD

VDD

XSTABY

VBR

Back light
(LED)

t8t7 t9

t11

OFF

PWM

ON

13.8

1200

10.0

--V

2.1 -V

-

-

-2.1

--V

200.0

VDD

0.4

VDD

0.4

μA

mV

V

mA

P-P

Hz

【*1】

【*2】

VDD=+12.0

【*3】

【*3】

【*4】

【*4】

【*4,5】f

%

-

(Module)

0.9 VDD

0.1 VDD

t10

-h

20μs ≦ t

0ms ≦ t

0ms ≦ t9≦

(50,000)

【Reference】

【*6】

7≦ 200ms

8≦

1sec ≦ t10≦

t12

0ms ≦ t11≦

0ms ≦ t12≦

OFF

about 300ms

【*2】 Current dissipation

Typ. value：　V

Max. value：　V

DD= +12V、Duty=100%
DD= +10.2V、Duty=100%

【*3】 XSTABY is connected by the pull-up resistor of 100kΩ.
【*4】 VBR is connected by the pull-up resistor of 33kΩ.

【*5】 PWM

PWM　＝　1/t14

f

VBR

Duty 1% : Min. Luminance
Duty 100% : Max. Luminance
Luminance changes in proportion to the duty ratio. (t

13≧10μs)

When the frequency slows, the display fineness might decrease.

【*6】 Luminance becomes 50% of an initial value. (Ta＝25℃, PWM=100%)

t13

t14

7．Timing characteristics of input signals

7-1．Timing characteristics

LD-24702A- 12

Typ.

65

Max. Unit

80.0

MHz

Clock

Parameter

Frequency

Symbol

1/Tc

Min.

50.0

1094 1344 1720 clock

Horizontal period

Horizontal period (High)

TH

THd

16.0

20.7

1024 1024

23.4 μs

1024 clock

ENAB

Vertical Frequency

Vertical period (High)

TV

776

13.3

TVd 768

768

806 line990

16.7 18.0 ms

768 line

【*1】 In case of using the long vertical period, the deterioration of display quality, flicker etc. may occur.

TH

THd

　　　ENAB

DATA
　　　(R,G,B)

1024 1024

12

Remark

【*1】

　Tc

768 767 768

　　　ENAB

TV

7-2．Input Data Signals and Display Position on the screen

RGBR

（ 1, 1 ）

GB

（ 2, 1 ）

D(1,1) D(2,1) D(3,1) D( 1024 ,1)

12

TVd

D(1,2) D(2,2)
D(1,3)

R

G B

D(1, 768 ) D( 1024 , 768 )

8．Input Signals, Basic Display Colors and Gray Scale of Each Color

8-1．8 bit input

Data signal

Colors &

Gray scale

Gray

Scale

G0 G1 G2 G3 B0 B5R4 B7B3 B4R5 R6 R7 G5 G6

G7G4

B1 B2R0 R1 R2 R3

LD-24702A- 13

B6

Black

Blue

Green

Cyan

Red

Basic Color

Magenta

Yellow

White

Black

↑

Darker

↑↑

↓↓

Brighter

Gray Scale of Red

↓

Red

－ 000000000000000000000000

－ 0000000000000000ＸＸ111111

－ 00000000ＸＸ11111100000000

－ 00000000ＸＸ111111ＸＸ111111

－ ＸＸ1111110000000000000000

－ ＸＸ11111100000000ＸＸ111111

－ ＸＸ111111ＸＸ11111100000000

－ ＸＸ111111ＸＸ111111ＸＸ111111

GS0 000000000000000000000000

GS1 100000000000000000000000

GS2 010000000000000000000000

↑↑↑

↓↓↓

GS250 010111110000000000000000

GS251 110111110000000000000000

GS252 Ｘ Ｘ 1111110000000000000000

Black

↑

Darker

↑↑

↓↓

Brighter

Gray Scale of Green

↓

Green

Black

↑

Darker

↑↑

↓↓

Brighter

Gray Scale of Blue

↓

Blue

GS0 000000000000000000000000

GS1 000000001000000000000000

GS2 000000000100000000000000

↑↑

↓↓↓

GS250 000000000101111100000000

GS251 000000001101111100000000

GS252 00000000ＸＸ11111100000000

GS0 000000000000000000000000

GS1 000000000000000010000000

GS2 000000000000000001000000

↑↑↑

↓↓

GS250 000000000000000001011111

GS251 000000000000000011011111

GS252 0000000000000000ＸＸ111111

↑

↓

0 :Low level voltage 1 :High level voltage Ｘ :Don’t care
Each basic color can be displayed in 200 gray scales(red), 221 gray scales(green), and 209 gray scales(blue)

from 8 bit data signals. According to the combination of total 24 bit data signals, the 10-million-color display
can be achieved on the screen.
※）Please refer to 【Appendix A】 of the end for the output gray scales of each color.

8-2．6 bit input

LD-24702A- 14

Basic ColorGray Scale of RedGray Scale of GreenGray Scale of Blue

Colors &

Gray scale

Black

Blue

Green

Cyan

Red

Magenta

Yellow

White

Black

↑

Darker

↑

↓

Brighter

GrayScale

－

－

－

－

－

－

－

－

GS0

GS1

GS2

↓

↓

GS61

Data signal

R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5

000000000000000000

000000000000111111

000000111111000000

000000111111111111

111111000000000000

111111000000111111

111111111111000000

111111111111111111

000000000000000000

100000000000000000

010000000000000000

↓↓

↓

↓↓↓

101111000000000000

↓

Red

Black

↑

Darker

↑

↓

Brighter

↓

Green

Black

↑

Darker

↑

↓

Brighter

GS62

GS63

GS0

GS1

GS2

↓

↓

GS61

GS62

GS63

GS0

GS1

GS2

↓

↓

GS61

011111000000000000

111111000000000000

000000000000000000

000000100000000000

000000010000000000

↓↓

↓

↓↓↓

000000101111000000

000000011111000000

000000111111000000

000000000000000000

000000000000100000

000000000000010000

↓↓

↓

↓↓↓

000000000000101111

↓

Blue

GS62

GS63

000000000000011111

000000000000111111

Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the combination of

total 18 bit data signals, the 262,144-color display can be achieved on the screen.

9．Optical Characteristics

g

LD-24702A-

Ta=+25℃, Vcc=＋3.3V

15

Parameter

Viewing

Horizontal θ21,θ22

angle

range

Vertical

Contrast ratio

Response Time

White Black

Chromaticity of

White

Chromaticity of

Red

Chromaticity of

Green

Chromaticity of

Blue

Luminance of white

Symbol Min.

Condition Unit

70 85

θ11

θ12

CR

CR>10

optimized

an

le

70

70

600

τr +τd

Wx

Wy

0.245

0.270

Ry

Gx

θ=0°

Gy

Bx

By

Y

L1

280

Typ.

85

85

1000

-

30

0.320

-Rx

-

-

-

-

0.635

0.345

0.297

0.625

0.145

- 0.080

350

Max.

-

-

-

-

-

0.3450.295

0.370

-

-

-

-

-

-

-

Deg.

Deg.

Deg.

ms

cd/m

Remark

【*1,2,4】

【*2,4】

【*3,4】

【*4】

2

【*4】

White Uniformity -- 1.33

【*5】

※The measurement shall be executed 30 minutes after lighting at rating.

　The optical characteristics shall be measured in a dark room or equivalent state with the method shown

in Fig.2 below.

Photodetector
：Response time（BM-5A）
：Contrast/Luminance/Chromaticity（SR-3）

Photodetector：(EZ-CONTRAST）

Panel center(θ=0°）

TFT-LCD module

fig.2-1 Measuring method of Viewing angle range.

Field=1°

400mm

fig.2-2 Measuring method of contrast, luminance, response time,
and Chromaticity.

Panel center(θ=0°)

TFT-LCD module

Fig.2　Optical characteristics measurement method

LD-24702A- 16

【*1】Definitions of viewing angle range:

θ22

Normal line

θ11

θ21

θ12

6 O'clock

【*2】Definition of contrast ratio:

Luminance with all pixels white

The contrast ratio is defined as the following.

Contrast （CR）＝

Luminance with all pixels black

【*3】Definition of response time:

The response time is defined as the following figure and shall be measured by switching the input signal for
"black" and "white".

Time

τ

White

r

White

100%

90%

(Relative Value)

Photodetector Output

10%

0%

τ

d

Black

【*4】This shall be measured at center of the screen. 256 512 768 pixel
【*5】Definition of white uniformity:

White uniformity is defined as the following with five measurements.
(①～⑤) 192

2

Maximum luminance of 5 points(①～⑤).

δ

=

w

Minimum luminance of 5 points(①～⑤).

5

3

1

4

384
576

pixel

LD-24702A- 17

10． Handling Precautions

a ) Be sure to turn off the power supply when inserting or disconnecting the cable.

b ) Since the front polarizer is easily damaged, pay attention not to scratch it.

c ) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

d ) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

e ) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.

Handle with care.

f ) Since CMOS LSI is used in this module, take care of static electricity and injure the human earth

when handling. Observe all other precautionary requirements in handling components.

g ) Since there is a circuit board in the module back, stress is not added at the time of a design assembly.

Please make it like. If stress is added, there is a possibility that circuit parts may be damaged.

h ) It causes an irregular display and the defective indication, etc., when always put constant pressure

on the back of the module.

Please do not make the structure to press the back of the module.

i ) Do not expose the LCD panel to direct sunlight. Lightproof shade etc. should be attached

when LCD panel is used under such environment.

j ) Connect GND to stabilize against EMI and external noise.

k ) When handling LCD modules and assembling them into cabinets, please avoid that long-terms storage

in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent,

adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the modules.

Do not use the LCD module under such environment.

l ) Liquid crystal contained in the panel may leak if the LCD is broken. Rinse it as soon as possible

if it gets inside your eye or mouth by mistake.

m ) Be careful when using it for long time with fixed pattern display as it may cause accidential image.

n ) Adjusting volume have been set optimally before shipment, so do not change any adjusted value.

If adjusted value is changed, the specification may not be satisfied.

o ) If a minute particle enters in the module and adheres to an optical material, it may cause display

non-uniformity issue, etc. Therefore, fine-pitch filters have to be installed to cooling and inhalation

hole if you intend to install a fan.

p) The polarizer surface on the panel is treated with Anti-Glare for low reflection. In case of attaching

protective board over the LCD, be careful about the optical interface fringe etc. which degrades display

quality.

q ) Notice : Never take to pieces the module , because it will cause failure.

Please do not peel off the Black tape pasted to the product.

An abnormal display by changing in quality of the polarizing plate might occur regardless of contact

r)

or no contact to the polarizing plate, because of epoxy resin (amine system curing agent)

that comes out from the material and the packaging material used for the set side, the silicon adhesive

(dealcoholization system and oxime system), and the tray blowing agents (azo-compound), etc.

Please confirm adaptability with your employed material.

11．Packing form

a) Piling number of cartons　： MAX．6

b) Package quantity in one carton： 10pcs

c) Carton size(TYP)： 450mm(W) × 313mm(D)×406mm(H)

LD-24702A- 18

d)

Total mass of one carton filled with full modules(10pcs)： 10.5kg

12．Reliability test items

No.

High temperature

1

storage test

Low temperature

2

strage test

High temperature

3

& high humidity

operation test

High temperature

4

operation test

Low temperature

5

operation test

6

7

8

Vibration test

(non-operating)

Shock test

(non-operating)

Thermal shock

Test item

　Ambient temperature 65℃ 240H

　Ambient temperature -25℃ 240H

Ambient temperature 40℃、Humidity 95％ RH 240H
（No condensation.）

　Panel surface 65℃ 240H

　Ambient temperature 0℃ 240H

＜Sin wave＞
　　Frequency ：10～57Hz／Vibration width (one side) ：0.076mm
　　　　 ：57～500Hz／Gravity：9.8m/s2
　　Sweep time：11minutes
　Test period ：3H（X，Y，Z direction 1H）

Max. gravity：490m/s2 Pulse width：11ms
　Direction：±X,±Y,±Z Test period ：1time／1direction

　-25℃[0.5h]～65℃[0.5h]／50cycles

test

Conditions

Remark

【Note1】

【Note1】

【Note1】

【Note1】

【Note1】

【Note1】

【Note1】

【Note1】

【Note1】 Under the display quality test conditions with normal operation state, these shall be no change

which may affect practical display function. (normal operation state：Temperature:15～35℃,

Humidity:45～75％, Atmospheric pressure:86～106kpa)

13．Others

13-１．Lot No Label:

Ａ）Module serial label

The label that displays SHARP･Model No.（ LQ150X1LW12）･Lot No. is stuck on the back of the module.

LD-24702A- 19

SHARP

LQ150X1LW12

XXXXXXXXXX

Ｂ）Backlight serial label

The label that displays the model No. and lot No. for the backlight is stuck on the back of the module.

＊＊＊＊＊＊-＊

＊＊＊＊＊＊－＊＊

13-2．Packing box Label:

The label that displays ①Model number（ LQ150X1LW12） ②Lot number ③Quantity of module is stuck

on the packing box. Moreover, the display of bar code also applies to this.

社内品番：

Barcode（①）

Model No.

Bar Code(Lot No.)

Lot No.

Model No.
(Figure and alphabet)

Lot No.
(Figure and alphabet)

(4S) LQ150X1LW12

Lot No display method（Figure and alphabet）

Production year
(Last digit of dominical year)

Production month (1-9X, Y, Z)

Serial No.

　Assembly site code

　Discernment code

Lot No. ：　（1T） 2009. 06. 01 ＊＊

Barcode（②）

Quantity ：　（Q） 10 pcs

Barcode（③）

ユーザー品番　：

シャープ物流用ラベルです。

Our management product number might be filled
（Example： LQ150X1LW12A etc.）

① Model number（ LQ150X1LW12）
② Lot number (DATA)

③ Quantity of module

A right picture is written to the packing box of module for the RoHS restriction.

R.C.（RoHs Compliance）means these parts have corresponded with the RoHs directive.

※
　This module corresponds from the first sample to RoHS Directive.

13-3．

The ozone-depleting substances is not used.

13-4． If any problem occurs in relation to the description of this specification , it shall be resolved

through discussion with spirit of cooperation.

14．Storage conditions

】

Environmental condition range of storage temperature and humidity

Temperature　　　　　0 to 40 degrees Celsius
Relative humidity 95% and below

【Note

Winter time temperature 5 to 15 degrees Celsius humidity , 85% and below

Direct sun light

　　　Atmospheric condition

Prevention of dew

Storage period

　　 Within above mentioned conditions, maximum storage period should be one year.

Please refer below as a mean value of the environmental conditions.
Summer time temperature 20 to 35 degrees Celsius humidity , 85% and below

Please maintain within 240 hours of accumulated length of storage time, with conditions of 40 degrees
Celsius and room humidity of 95%.

Please keep the product in a dark room or cover the product to protect from direct sun light.

Please refrain from keeping the product with possible corrosive gas or volatile flux.

Please store the product carton either on a wooden pallet or a stand / rack to prevent dew.
Do not place directly on the floor. In addition, to obtain moderate ventilation in between the pallet’s
top and bottom surfaces, pile the cartons up in a single direction and in order.

Please place the product cartons away from the storage wall.

LD-24702A- 20

LD-24702A- 21

Fig. 1　：　LQ150X1LW12　ＯＵＴＬＩＮＥ　ＤＩＭＥＮＳＩＯＮＳ

LD-24702A- 22

Fig.3　:　PACKING FORM

【Appendix A】
Output step table to input data (P.13 8-1/8-2) of each color (R,G,B)

ＲＧＢ

Number of

steps

Step value Step value

200 221 209

RGB RGB RGB

Output step

Step value

Output stepOutput step

GS0 0 0 0 GS86 86 83 73 GS172 177 173 146
GS1 0 1 0 GS87 87 84 74 GS173 178 173 147
GS2 0 2 0 GS88 88 85 75 GS174 179 174 148
GS3 0 3 0 GS89 90 86 75 GS175 180 175 149
GS4 0 4 0 GS90 90 87 76 GS176 181 176 150
GS5 0 8 0 GS91 92 88 77 GS177 181 177 151
GS6 1 12 0 GS92 92 89 78 GS178 182 177 152
GS7 6 14 0 GS93 93 90 78 GS179 183 178 153
GS8 15 14 0 GS94 94 91 79 GS180 183 179 153

GS9 18 17 0 GS95 96 92 80 GS181 185 180 154
GS10 19 19 1 GS96 96 93 81 GS182 185 181 155
GS11 23 20 2 GS97 98 94 81 GS183 186 182 156
GS12 25 22 3 GS98 98 95 82 GS184 187 182 157
GS13 26 24 4 GS99 99 96 83 GS185 188 183 158
GS14 27 25 5 GS100 100 97 84 GS186 189 184 159
GS15 28 26 7 GS101 101 98 85 GS187 189 185 160
GS16 30 28 8 GS102 103 99 85 GS188 190 185 161
GS17 31 28 9 GS103 104 100 86 GS189 191 186 162
GS18 32 30 11 GS104 105 101 87 GS190 192 187 163
GS19 33 31 12 GS105 106 102 88 GS191 192 188 164
GS20 34 32 13 GS106 107 103 89 GS192 194 189 165
GS21 35 33 15 GS107 108 104 89 GS193 194 190 166
GS22 36 34 16 GS108 109 105 90 GS194 195 190 167
GS23 37 34 17 GS109 110 106 91 GS195 196 191 168
GS24 38 35 18 GS110 112 106 92 GS196 197 192 169
GS25 39 36 19 GS111 113 107 93 GS197 197 193 171
GS26 39 37 21 GS112 114 108 93 GS198 198 194 172
GS27 40 38 22 GS113 115 109 94 GS199 199 195 172
GS28 41 39 24 GS114 116 110 95 GS200 200 196 173
GS29 42 40 25 GS115 116 112 96 GS201 200 197 174
GS30 43 41 26 GS116 118 112 97 GS202 201 197 175
GS31 43 41 27 GS117 119 113 97 GS203 202 198 175
GS32 44 42 28 GS118 120 114 98 GS204 203 199 176
GS33 45 43 29 GS119 121 116 99 GS205 204 200 177
GS34 45 44 30 GS120 122 117 100 GS206 205 201 177
GS35 46 44 32 GS121 123 118 101 GS207 205 202 178
GS36 47 45 33 GS122 124 119 101 GS208 206 203 179
GS37 47 46 34 GS123 125 120 102 GS209 207 204 180
GS38 48 47 35 GS124 126 121 103 GS210 208 204 180
GS39 49 47 36 GS125 127 122 104 GS211 209 205 181
GS40 49 48 37 GS126 128 123 105 GS212 209 206 182
GS41 50 48 38 GS127 129 124 106 GS213 211 207 183
GS42 51 49 39 GS128 130 125 107 GS214 211 208 184
GS43 51 50 40 GS129 131 126 108 GS215 212 209 184
GS44 52 51 41 GS130 133 127 108 GS216 213 210 185
GS45 52 51 42 GS131 134 128 109 GS217 214 211 186
GS46 53 52 43 GS132 135 129 110 GS218 215 212 187
GS47 54 52 44 GS133 136 130 111 GS219 216 213 188
GS48 54 53 45 GS134 137 132 112 GS220 216 214 188
GS49 55 54 46 GS135 138 133 113 GS221 217 215 189
GS50 56 54 47 GS136 139 134 114 GS222 218 216 190
GS51 56 55 48 GS137 140 135 115 GS223 219 217 191
GS52 57 56 48 GS138 142 136 116 GS224 220 217 192
GS53 58 56 49 GS139 142 137 116 GS225 221 218 193
GS54 58 57 50 GS140 144 138 117 GS226 222 219 194
GS55 59 58 50 GS141 145 139 118 GS227 223 221 194
GS56 60 58 51 GS142 146 140 119 GS228 224 221 195
GS57 60 59 52 GS143 147 141 120 GS229 225 222 196
GS58 61 60 53 GS144 149 142 121 GS230 226 224 197
GS59 62 60 53 GS145 150 143 122 GS231 227 225 198
GS60 63 61 54 GS146 150 145 123 GS232 228 226 199
GS61 63 62 55 GS147 152 146 124 GS233 228 227 200
GS62 64 63 56 GS148 153 147 124 GS234 230 228 200
GS63 65 63 57 GS149 154 148 125 GS235 231 229 201
GS64 66 64 57 GS150 155 149 126 GS236 231 231 202
GS65 67 65 58 GS151 156 150 127 GS237 232 232 203
GS66 68 66 59 GS152 158 151 128 GS238 234 233 204
GS67 69 66 60 GS153 159 152 129 GS239 234 234 205
GS68 69 67 60 GS154 160 153 130 GS240 236 235 206
GS69 70 68 61 GS155 160 154 130 GS241 237 237 207
GS70 71 69 62 GS156 161 155 131 GS242 237 238 208
GS71 72 70 63 GS157 163 156 132 GS243 238 239 209
GS72 73 71 63 GS158 164 157 133 GS244 239 241 210
GS73 73 72 64 GS159 165 158 134 GS245 240 242 211
GS74 75 72 65 GS160 166 159 135 GS246 240 243 212
GS75 76 73 65 GS161 167 160 136 GS247 241 244 213
GS76 76 74 66 GS162 168 161 137 GS248 241 244 214
GS77 78 75 67 GS163 169 163 137 GS249 242 245 214
GS78 78 76 68 GS164 170 164 138 GS250 242 245 215
GS79 79 77 68 GS165 172 165 139 GS251 243 246 215
GS80 81 77 69 GS166 173 166 140 GS252 243 246 216
GS81 82 78 70 GS167 173 167 141 GS253 244 247 216
GS82 83 79 70 GS168 174 168 142 GS254 244 247 217
GS83 83 80 71 GS169 175 169 143 GS255 245 248 217
GS84 84 81 72 GS170 175 171 144
GS85 85 82 73 GS171 176 172 145