SHARP LQ150X1LG96 Specification
SPEC No.
RECORDS OF REVISION
LQ150X1LG96
DATE SUMMARY
REVI
SED
No
PAGE
NOTE
LD-25605A
2013/6/27 -
- Contents -
No. page
1 Application ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1
2 Overview ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2
3 Mechanical Specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2
4 Input Terminals ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3
5 Absolute Maximum Ratings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9
6 Electrical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10
7 Timing characteristics of input signals ・・・・・・・・・・・・・・・・・・・・・・ 12
8 Input Signals, Basic Display Colors and Gray Scale of Each Color ・・ 13
9 Optical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15
10 Handling Precautions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17
11 Packing form ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18
12 Reliability test items ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18
13 Others ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 19
14 Storage conditions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 20
Fig.1 OUTLINE DIMENSIONS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 21
Fig.3 PACKING FORM ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22
LD-25605A- 1
1．Application
This specification applies to the color TFT-LCD module LQ150X1LG96.
This specification is the proprietary product of SHARP CORPORATION (SHARP) and include
materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in
any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express
written permission of SHARP.
The device listed in this specification was designed and manufactured for use in general electronic
equipment.
In case of using the device for applications such as control and safety equipment for transportation (controls of
aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which
require higher reliability and safety, take into consideration that appropriate measures such as fail-safe
functions and redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications,
telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment
for life support.
SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply
with the instructions and the precautions specified in this specification .
Contact and consult with a SHARP sales representative for any questions about this device.
LD-25605A- 2
2．Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a White-LED
Backlight unit. Graphics and texts can be displayed on a 1024×RGB×768dots panel with about 16 million
colors by using LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for
TFT-LCD panel driving and supply voltage for backlight.
The maximum viewing angle is in the 6o'clock direction.
The 12o'clock direction is difficult to reverse the grayscale.
The LED driver circuit and the PWM circuit to drive the backlight are built into the module.
3．Mechanical technical literatures
Parameter technical literatures
Display size
Active area
Pixel format
Aspect ratio
Pixel pitch
Pixel configuration
Display mode
Unit outline dimensions
Mass
Surface treatment
(1pixel＝R＋G＋B dot)
326.5（W)×253.5（H)×9.6(D)
Anti-glare and hard-coating 3H
38（15inch）Diagonal
304.1（H)×228.1（V)
1024（H)×768（V)
4：3
0.297（H)×0.297（V)
R,G,B vertical stripe
Normally white
950 （Max.）
Unit
cm
mm
pixel
mm
mm
g
Outline dimensions are shown in Fig.1.
LD-25605A- 3
4．Input Terminals
4-1．TFT-LCD panel driving
CN1（Interface signals and +3.3V power supply）
Using connectors：DF14H-20P-1.25H(56) (Hirose Electric Co., Ltd.)
Corresponding connectors：DF14-20S-1.25C(conector) (Hirose Electric Co., Ltd.)
：DF14-2628SCF(terminal) (Hirose Electric Co., Ltd.)
Using LVDS receiver：Building into cotroll IC（THC63LVDF84B（Thine electronics） or Compatible product）
Corresponding LVDS transmitter：THC63LVDM83R（Thine electronics） or Compatible product
CN1
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Symbol
VCC
VCC
GND
GND
RxIN0RxIN0+
GND
RxIN1RxIN1+
GND
RxIN2RxIN2+
GND
CK INCK IN+
Function
+3.3V Power supply
+3.3V Power supply
GND
GND
LVDS receiver signal CH0 (-)
LVDS receiver signal CH0 (+)
GND
LVDS receiver signal CH1 (-)
LVDS receiver signal CH1 (+)
GND
LVDS receiver signal CH2 (-)
LVDS receiver signal CH2 (+)
GND
LVDS receiver signal CK (-)
LVDS receiver signal CK (+)
Remark
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
16
17
18
19
20
【*1】 RL/UD = LOW or HIGH
【*2】 SELLVDS is shown in 4-2.
GND
RxIN3RxIN3+ LVDS
RL/UD
SELLVDS
Horizontal/Vertical display mode select signal
LVDS receiver signal CH3 (-)
LVDS receiver signal CH3 (+)
GND
LVDS SET
LVDS
【*1】
【*2】
4-2．Data Mapping
1) 8 bit input
pin assignment with SELLVDS pin (THC63LVDM83R（Thine electronics） or Compatible product)
20Pin SELLVDSTransmitter
LD-25605A- 4
Pin No Data
51 TA0
= L(GND) or Open = H(3.3V)
R0 (LSB) R2
52 TA1 R1 R3
54 TA2 R2 R4
55 TA3 R3 R5
56 TA4 R4 R6
3 TA5 R5 R7 (MSB)
4 TA6 G0 (LSB) G2
6 TB0 G1 G3
7 TB1 G2 G4
11 TB2 G3 G5
12 TB3 G4 G6
14 TB4 G5 G7 (MSB)
15 TB5 B0 (LSB) B2
19 TB6 B1 B3
20 TC0 B2 B4
22 TC1 B3 B5
23 TC2 B4 B6
24 TC3 B5 B7 (MSB)
27 TC4 (HS) (HS)
28 TC5 (VS) (VS)
30 TC6 DE DE
50 TD0 R6 R0 (LSB)
2 TD1 R7 (MSB) R1
8 TD2 G6 G0 (LSB)
10 TD3 G7 (MSB) G1
16 TD4 B6 B0 (LSB)
18 TD5 B7 (MSB) B1
25 TD6 (NA) (NA)
< SELLVDS = L(GND) or Open >
R1 R0 G0 R5 R4 R3 R2 R1 R0 G0
G2 G1 B1 B0 G5 G4 G3 G2 G1 B1
B3 B2 DE (VS) (HS) B5 B4 B3 B2 DE
LD-25605A- 5
1 CYCLE
R7 R6 NA B7 B6 G7 G6 R7 R6 NA
< SELLVDS = H(3.3V) >
R3 R2 G2 R7 R6 R5 R4 R3 R2 G2
G4 G3 B3 B2 G7 G6 G5 G4 G3 B3
B5 B4 DE (VS) (HS) B7 B6 B5 B4 DE
1 CYCLE
R1 R0 NA B1 B0 G1 G0 R1 R0 NA
DE：DATA ENABLE
HS：Hsync
VS：Vsync
Loading...