SHARP LPE281 Technical Report
Date: Mar. 5, 1998
Laser printer: JX9200 series
[Part change information]
Parts change
1. Model Name: JX9200/9210/9230
2. General: (1) As the countermeasure against uneven contact in the developing bath, the thickness of
FD-MOLT-L (PMLT-0051GCZZ) bonded on the FD cover is changed.
No. : LPE-281
(2) In order to increase the heat resistance margin of FU bearing L, the fixing bearing is changed
to a type of the excellent heat resistance.
(3) For better productivity, the copying bearing is changed.
(4) The label written in Chinese is added on the packing case of China and Hong Kong types.
(5) As the countermeasure against various abnormalities, the version of the printer driver is
improved.
3. Description: (1) Thickness of FD-MOLT-L: Changed from 4 mm to 5 mm.
(5) The version No. of the printer driver is changed from 2.06 to 2.23. (The part code is not
changed.)
4. Action: Production in May, 1996 . . . . . . . . (1)
Production in May, 1997 . . . . . . . . (2), (3)
Production in September, 1996 . . . (4), (5)
SHARP CORPORATION Printer and Scanner Division
1/2
Orange
C
Ref.
Model
No.
name
JX9200
1
JX9210
2 JX9230 NBRGP0032GCZ3
JX9200
3
JX9210
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Version
SRH 8
ALL
P/G No.
5 -15
4 -3
Current parts
Parts code Parts code
NBRGC0034GCZ1 NBRGP0082GCZZ AB Fu bearing L ’96/5 1
NBRGP0032GCZ2
-
New parts
CBRGP0032GC51
TLABB0229GCZZ
5. Interchangeable if replaced with same types of related
parts in use.
6. Others.
Parts name
Price
rank
AG
TR bearing J ’97/7
AC
Label ’96/9
Effec-
tive
time
Inter-
change-
ability
Note
3
2/2
Loading...